9fa705c488
fmcadc2: Fixed zc706 spi connection
2015-06-19 13:13:02 +03:00
ad743c8403
axi_ad9434: This IP core does not have 'data underflow' port
2015-06-18 16:51:42 +03:00
301226c766
fmcjesdadc1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:47 +03:00
f01ba54c5f
fmcomms1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:33 +03:00
009d33f0a0
ad9467: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:20 +03:00
41799c55dc
fmcjesdadc1: Fixed mdc_mdio connection for kc705
2015-06-18 11:04:29 +03:00
6de154d2c2
fmcomms1: Fixed mdc_mdio connection for kc705
2015-06-18 11:04:00 +03:00
988f4fac8f
ad9467: Fixed mdc_mdio connection for kc705
2015-06-18 11:03:11 +03:00
e6d9735e54
fmcomms1: Fixed zed top file, the DAC dma was not correctly connected
2015-06-17 14:43:34 +03:00
2e46bda916
motcon2_fmc: Update project to use the latest util_gmii_to_rgmii
2015-06-16 17:43:10 +03:00
d137811952
util_gmii_to_rgmii: Updated core so that it has an option to include a delay controller.
...
It also allows to configure the fixed delay value so that no additional constraints are needed
The default value of 18 seems to work very well(450mbps tx / 640 mbps rx) on the motor control platform used for tests
2015-06-16 17:39:31 +03:00
8fc0e0e62d
fmcjesdadc1: Fixed vc707 ethernet connections
2015-06-16 16:27:09 +03:00
142f802f54
adv7511: Fixed vc707 ethernet connections
2015-06-16 16:26:58 +03:00
a2f380ab64
fmcjesdadc1: Fixed vc707 ethernet connections
2015-06-16 15:31:17 +03:00
98ae6d567f
adv7511: Fixed vc707 ethernet connections
2015-06-16 15:30:47 +03:00
4c80013faf
projects/daq2: gt lane split
2015-06-12 15:56:03 -04:00
28e8275a5d
library/axi_jesd_gt: split gt lanes
2015-06-12 15:56:03 -04:00
e6525136a9
daq2/common: axi_ad9144_fifo needs a proper reset sequence
...
Connect the axi_ad9144_fifo/dma_rst signal to sys_cpu_reset
2015-06-12 14:03:46 +03:00
ddc08c960c
ad_tdd_control: Connect the reset to all the flops
2015-06-11 12:07:47 +03:00
f587aa42d9
a10gx- tx sync
2015-06-10 14:32:25 -04:00
04eb998ff1
axi_jesd_gt: constraints
2015-06-10 14:29:06 -04:00
e3e4af5c51
daq2/zc706: open ports
2015-06-10 14:25:58 -04:00
e2f4a4c5cf
library: make preset registered for timing paths
2015-06-10 13:41:41 -04:00
df0eaad1e2
gt: constraints
2015-06-10 11:38:15 -04:00
97ab5e0ef7
fmcomms1: Update project to integrate the new util_wfifo
2015-06-10 15:16:17 +03:00
3d86f140e5
usdrx1: Removed ILA as the ports from axi_jesd_gt were removed
2015-06-10 10:56:55 +03:00
d6163bea5e
axi_jesd_gt: Fixed constraints
2015-06-10 10:56:22 +03:00
5e4f572092
axi_ad9122: Fixed constraints
2015-06-10 10:56:03 +03:00
8a1f4bf5f6
ad6676,ad9144,ad9152,ad9234,ad9250,ad9434,ad9467,ad9625,ad652,ad9671,ad9680,ad9739a:Set default driver value for overflow, underflow, gpio_in and dac_sync ports
2015-06-09 14:21:12 +03:00
1fcdeac054
fmcjesdadc1/common: The new GT module does not have integrated monitor/debug ports
2015-06-09 11:50:55 +03:00
2330d1e27d
daq1/common: The new GT module does not have integrated monitor/debug ports
2015-06-09 11:50:27 +03:00
00b8c171b8
a10gx: pll locked to reset controller
2015-06-08 15:00:11 -04:00
a598e1c614
axi_ad9265: Set default driver value for overflow and underflow ports
2015-06-08 17:50:23 +03:00
ccf887f0ba
axi_ad9643: Set default driver values for overflow, underflow and gpio_in ports
2015-06-08 17:48:41 +03:00
ded0dd5dbe
axi_ad9122: fixed constraints, removed unneded drp reset
2015-06-08 17:45:14 +03:00
4b08df9ed6
ad9361/tdd: Fix generation of tx_valid_* signals
...
In FDD mode the tx_valid_* signals are generated inside the axi_ad9361_tx module, in function of
the selected dac data rate. In TDD mode, these signals are gated by the tdd_enable and tdd_tx_dp_en signals.
In other words, the tx_valid_* signals will be valid just when tdd_enable and tdd_tx_dp_en is active.
2015-06-08 16:23:32 +03:00
c926daca3a
ad9361/tdd: Fix generation of tx_valid_* signals
...
In FDD mode the tx_valid_* signals are generated inside the axi_ad9361_tx module, in function of
the selected dac data rate. In TDD mode, these signals are gated by the tdd_enable and tdd_tx_dp_en signals.
In other words, the tx_valid_* signals will be valid just when tdd_enable and tdd_tx_dp_en is active.
2015-06-08 16:22:21 +03:00
be6d6f627a
ad9265: Removed ILA
2015-06-08 15:03:34 +03:00
25e56a4d03
arradio: renamed fmcomms2 c5soc to arradio
2015-06-08 11:35:21 +03:00
dc7064ab95
fmcomms2/vc707 - wfifo changes
2015-06-05 12:44:04 -04:00
ce60056cd5
wfifo: async reset for cpu side
2015-06-05 12:44:04 -04:00
ab1f9bed10
wfifo: remove srl from sync registers
2015-06-05 12:44:04 -04:00
25f1ad73f0
fmcomms2/freqcvt: Update SPI interface I/O
2015-06-05 18:16:14 +03:00
f1e75963a2
fmcomms2: wfifo+pack changes
2015-06-05 09:20:50 -04:00
da8915296b
pack: ip scripts
2015-06-05 09:20:08 -04:00
6338dfd8b7
ad9361: ip defaults & rst output
2015-06-05 09:19:39 -04:00
cb0324c2b1
wfifo: multi-channel option
2015-06-05 09:19:05 -04:00
b3324b3ef9
Merge branch 'dev' into hdl_2015_r1
...
Conflicts (all tdd related, all solved):
library/axi_ad9361/axi_ad9361.v
library/axi_ad9361/axi_ad9361_tdd.v
library/common/ad_tdd_control.v
library/common/up_tdd_cntrl.v
2015-06-05 15:51:03 +03:00
2e877389b2
ad9361_tdd: Some naming and hierarchical changes
2015-06-04 18:09:49 +03:00
47469ad375
ad9434/ad9467 : Connect reset signal for AXI streaming interface of the device dma
2015-06-04 18:09:48 +03:00
Adrian Costina
Istvan Csomortani
Rejeesh Kutty