Commit Graph

46 Commits (2abc7278bfd9402189a035c8871a4ec9ff6fe886)

Author SHA1 Message Date
Istvan Csomortani 84b2ad51e2 license: Add some clarification to the header license 2017-05-31 18:18:56 +03:00
Istvan Csomortani 85ebd3ca01 license: Update license terms in hdl source files
Fix a few gramatical error, fix the path of the top level license
files.
2017-05-29 09:55:41 +03:00
Istvan Csomortani 9055774795 all: Update license for all hdl source files
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.

New license looks as follows:

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.

Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
 (at the option of the user):

  1. The GNU General Public License version 2 as published by the
     Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html

OR

  2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
Rejeesh Kutty c728299e71 altera- default to latest version 2017-05-12 13:25:17 -04:00
Istvan Csomortani 1c23cf4621 all: Update verilog files to verilog-2001 2017-04-13 11:59:55 +03:00
Istvan Csomortani c1bdfca4c3 library: Delete all adi_ip_constraint process call 2017-04-06 12:36:47 +03:00
Istvan Csomortani e0efbe210e constraints: constraint files should be specified at adi_ip_files 2017-04-03 18:12:28 +03:00
Rejeesh Kutty c277b39796 arradio/c5soc- critical warnings fix 2017-03-20 12:14:13 -04:00
Istvan Csomortani ac2e5a9dac constraints: Update constraints
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-24 13:43:32 +02:00
Adrian Costina 8ebc8fe4e2 updated makefiles 2016-12-09 23:06:41 +02:00
Adrian Costina d60bce654c Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools 2016-08-05 15:16:04 +03:00
Rejeesh Kutty 4f0d7bd6eb util_wfifo: read after write is complete 2016-07-11 09:59:31 -04:00
Rejeesh Kutty c293c04634 hdl make updates 2016-06-01 13:53:09 -04:00
Rejeesh Kutty bf0b90229a rfifo/wfifo- qsys ip 2016-05-18 13:24:13 -04:00
Rejeesh Kutty 285cbc7225 xfifo- fix sdc/xdc names 2016-05-18 13:24:13 -04:00
Rejeesh Kutty 4fbff45e27 util_wfifo- updates 2016-05-16 12:19:38 -04:00
Rejeesh Kutty f515885fc4 util_wfifo: altera ip 2016-05-16 12:19:38 -04:00
Istvan Csomortani 900db3d8ed util_wfifo: Fix reset related timing violation
The memory instance reset connected to ground, rather than connect to dout_rstn.
2015-09-23 16:36:33 +03:00
Istvan Csomortani 516c59523d util_wfifo: Cosmetic changes. 2015-09-23 16:36:31 +03:00
Adrian Costina 46808c4c41 util_wfifo: Changed some reset for several registers from asynchronous to synchronous for better integration with the FIFO 2015-09-16 18:55:47 +03:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Istvan Csomortani 46fa91d5be Makefile: Update Make files 2015-07-03 18:08:57 +03:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
Rejeesh Kutty ce60056cd5 wfifo: async reset for cpu side 2015-06-05 12:44:04 -04:00
Rejeesh Kutty ab1f9bed10 wfifo: remove srl from sync registers 2015-06-05 12:44:04 -04:00
Rejeesh Kutty cb0324c2b1 wfifo: multi-channel option 2015-06-05 09:19:05 -04:00
Adrian Costina 463c4d4d28 util_wfifo: Added constraint for the resetn path 2015-04-30 12:05:02 +03:00
Adrian Costina 288b9cccff Makefile: Added makefiles for imageon_loopback project. Updated axi_ad9152, util_gmii_to_rgmii, util_wfifo to include constraints file 2015-04-28 15:22:37 +03:00
Adrian Costina 67c581cef8 util_wfifo: Updated to be used with adc_rst from the adc_clk clock domain 2015-04-28 14:50:00 +03:00
Adrian Costina 1ad87aa27c util_wfifo: Added constraints 2015-04-27 11:19:56 +03:00
Adrian Costina dc2b37bd0c Makefile: Added top level Makefile. Modified behavior of clean and clean-all
Clean ran for a project will clean only the project files.
Clean-all ran for a project will clean also the library files on which the project depends.
The clean commands will only remove specific files and directories.

The top Makefile allows several options(per suggestion from jameyhicks):
make fmcomms1.zed will run "make all" in projects/fmcomms1/zed/
make clean will run "make clean" for all the projects
make clean-all will run "make clean" for all the projects and libraries
make lib will run "make all" for the library files
2015-04-17 17:22:38 +03:00
Adrian Costina 374f82e7de makefiles: The clean command for library won't remove the xml files, except for component.xml.
Updated also the dmac dependencies
2015-04-16 11:53:27 +03:00
Rejeesh Kutty 5f8e9a74ea makefile: updated 2015-04-07 16:32:01 -04:00
Adrian Costina f79a152958 Makefiles: updated all makefiles adding clean functionality 2015-04-03 11:57:54 +03:00
Rejeesh Kutty ba2e635918 makefile: added 2015-04-01 16:28:20 -04:00
Adrian Costina 6ee9b3a1e2 util_wfifo: Fixed reset 2015-03-25 15:34:21 +02:00
Rejeesh Kutty 8056574bae util_wfifo: renamed ports to make vivado happy 2015-01-06 16:16:25 -05:00
Rejeesh Kutty 36b041ccc0 util_wfifo: port name fixes & doc. 2015-01-06 16:15:42 -05:00
Adrian Costina 2744d0cb37 util_wfifo: Update to implement flip flops 2014-11-17 12:10:21 +02:00
Rejeesh Kutty 403fe1b373 wfifo: read only if ready is asserted 2014-10-31 13:05:17 -04:00
Rejeesh Kutty f0b25c39a3 wfifo: added axi stream support 2014-10-15 14:50:56 -04:00
Rejeesh Kutty e38813fa9f fifo- monitor status signals 2014-06-25 12:15:13 -04:00
Rejeesh Kutty af07f8874f wfifo/rfifo: asynchronous interface 2014-04-10 14:01:40 -04:00
Rejeesh Kutty f9dfd944c9 library/util_fifo: updates for read side 2014-03-10 14:48:14 -04:00
Rejeesh Kutty a6d747411e util_wfifo: ip cleanup 2014-03-10 11:21:20 -04:00
Rejeesh Kutty d6256e9e29 library: dds and dcfilter changes, added fifo wrappers 2014-03-10 11:11:16 -04:00