33b265a742
Makefile: Update Makefiles
2016-03-14 09:31:17 +02:00
561412e322
pzsdr-cmos swap
2016-03-11 11:25:58 -05:00
c7ee15d4f4
ccbrk_cmos: cmos mode
2016-03-11 11:25:58 -05:00
c566784ba9
ccbrk_cmos: ccbrk copy
2016-03-11 11:25:58 -05:00
287770a201
axi_dmac: Fix tlast generation on AXI stream master
...
For the AXI stream interface we want to generate TLAST only at the end of
the transfer, rather than at the end of each burst.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-03-08 10:53:59 +01:00
b0f90bd0e8
daq1/cpld: Read interface fix
2016-03-04 20:28:24 +02:00
7e607957ee
daq1.cpld: Prevent the spi_counter to roll over.
2016-03-04 20:28:22 +02:00
262a42c676
daq1/cpld: Update CPLD_VERSION value
2016-03-04 20:28:20 +02:00
9439862301
daq1/cpld: Update CPLD
...
Change to control line fpga_to_cpld to cpld_to_fpga, this is not a functional change.
2016-03-04 20:28:18 +02:00
583ef82fd0
ad9361- cmos mode
2016-03-04 10:39:48 -05:00
7a320a3d34
ad_lvds* - updates
2016-03-04 10:39:48 -05:00
3466f21f8e
pzsdr add cmos/lvds support
2016-03-04 10:39:48 -05:00
18f30c8dc8
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
a2374f64bf
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
7d2939be92
ad9361- cmos mode initial commit
2016-03-04 10:39:48 -05:00
977d9d0624
Merge branch 'hdl_2015_r2' into dev
...
Conflicts:
projects/daq1/common/daq1_spi.v
2016-03-02 13:52:15 +02:00
40fb68dfd5
ad9265, ad9434, ad9467, daq1, daq2, daq3, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1, fmcomms6, fmcomms7, usdrx1: updated common spi module so that spi streaming is possible
2016-03-02 13:39:37 +02:00
becc23a69b
daq2: Modified common spi module so that spi streaming is possible
...
- stop incrementing spi_count after the instruction cycle
2016-03-01 17:25:58 +02:00
f7e490c2b3
hdlmake.pl updates
2016-02-26 13:46:11 -05:00
e012d0519b
Merge remote-tracking branch 'origin/hdl_2015_r2' into dev
2016-02-26 13:39:39 -05:00
f6e64e42b0
kcu105: add ethernet idelaycntrl
2016-02-26 13:19:49 -05:00
59313f3c90
daq1: ADC DMA must be in none-cyclic mode
2016-02-24 14:37:19 +02:00
c0a559a9b1
daq1: Fix some typos in the SPI wrapper
2016-02-24 14:31:56 +02:00
8ccd8d87bb
daq2: A10GX, increase analog/digital reset durations
...
- reset the xcvr_rst_cntrl only from the axi_jesd_xcvr
- checked separate RX/TX reset per channel
2016-02-23 11:41:38 +02:00
89f7aadfb1
fmcjesdadc1: A5GT, connected xcvr_rxt_cntrl reset input to the axi_jesd_xcvr reset output
...
This will allow for the transceivers to be reset by the axi_jesd_xcvr core
2016-02-23 11:31:07 +02:00
4fb6589b2d
pzsdr/ccfmc: add fan controls
2016-02-19 16:40:54 -05:00
377461e0d4
Merge branch 'hdl_2015_r2' into dev
2016-02-19 14:15:27 +02:00
0f37dd6424
fmcjesdadc1: Fixed project
...
- changed system_project.tcl so that all base designs to be included
- changed DMA properties to take into consideration the new parameter names
- changed reset bridges to asynchronous
- increased maximum burst size of the DMA bridge
- changed the data_width of the memory bus to 256, as with 512 timing violations may occur
- changed base addresses for the base system to be the same as in the previous release
2016-02-19 14:09:57 +02:00
ce760eb691
fmcadc2- add adf4355 access
2016-02-18 16:17:33 -05:00
a8e9d72273
adc/dac - prefix parameters
2016-02-17 14:16:04 -05:00
d94f157454
arradio: Changed ADC/DAC DMA address length to 24 bit
2016-02-16 15:27:51 +02:00
43e03ca6f7
arradio: Updated project
...
- made the reset bridges asynchronous
- connected the arradio gpio to the CPU interconnect
2016-02-16 14:50:23 +02:00
5518c47ca4
daq1_cpld: Set Input and tristate I/O termination mode to FLOAT
2016-02-15 19:27:59 +02:00
051ac307e6
daq1_cpld: Do not forward the first eight clock cycles of fmc_spi_sclk to sclk
2016-02-15 19:26:58 +02:00
9370246cfa
daq1: Fix bugs on CPLD design
...
Fix the CSN forwarding.
2016-02-12 16:59:09 +02:00
5ed2c0b599
daq1: Update CPLD constraints file
2016-02-12 16:54:36 +02:00
aa2ff0223a
daq1: Update CPLD design
...
+ SPI counter counts on negative edge of the SPI_CLK
+ Shift register for read, shifting MSB first
+ Fix write access logic
+ Update the internal register addresses
2016-02-12 14:45:18 +02:00
e1c5d6a8f7
axi_ad9684: Fix constraint file
2016-02-12 14:38:59 +02:00
c32d7147d5
daq1 : There is a single CSN from master
2016-02-12 14:38:32 +02:00
9675df15c6
daq1_zc706: Update constraints file
2016-02-12 14:37:02 +02:00
a747fad540
axi_ad9361: tx_valid must be controlled by the TDD controller
2016-02-12 14:33:34 +02:00
e381d5170c
util_tdd_sync: Update the synchronization interface
...
Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-12 14:27:37 +02:00
1c3795ad02
Update .gitattributes
...
Add xise file extension to .gitattributes
2016-02-12 14:27:35 +02:00
61f9f72a75
fmcjesdadc1: Updated VC707 project for maximum throughput from DMA to DDR
...
- Increased the DMAs internal FIFO
2016-02-09 12:30:56 +02:00
c431adb793
fmcjesdadc1: Updated KC705 project for maximum throughput from DMA to DDR
...
- Increased the DMA internal FIFO
2016-02-09 12:00:27 +02:00
ad9ecbbbb6
daq2: Updated a10gx project to quartus 15.1.1
2016-02-05 17:43:05 +02:00
0d67af370f
util_upack: Fixed problem when dac valid isn't continuous from the DAC
...
In cases when the dac_valid_ from the DAC is not continuous, in some situations
there were two dac_valid pulses sent to the DMA.
2016-02-04 13:03:46 +02:00
bb62f6d225
pzsdr1- updates
2016-02-02 12:34:09 -05:00
41b6ebeeaf
pzsdr1- updates
2016-02-02 12:33:55 -05:00
b147e9c94a
pzsdr1- updates
2016-02-02 12:33:01 -05:00
Adrian Costina
Rejeesh Kutty
Lars-Peter Clausen
Istvan Csomortani