Commit Graph

21 Commits (34994222b416665051d0bee06be2170b33667cfe)

Author SHA1 Message Date
Lars-Peter Clausen 8fa50a0cb4 daq2: Set correct transceiver type for UltraScale projects
Make sure that the axi_adxcvr instances are configured with the same
transceiver type as the util_adxcvr.

This is necessary for software to be able to detect the transceiver type
and support dynamic reconfiguration.

It is also necessary for correct eye scan support in the axi_adxcvr block.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-11-14 14:31:03 +01:00
Istvan Csomortani b92703b59f daq2: Fix typo 2017-04-24 15:44:45 +03:00
Istvan Csomortani 871cfa7e5b daq2/kcu105: Update tcl command for IP configuration 2017-04-24 11:50:35 +03:00
Rejeesh Kutty fb4a583613 projects/system_bd- adc/dac fifo board designs 2017-02-27 16:06:39 -05:00
Rejeesh Kutty edd5e9570f file renamed; sed output; fingers crossed 2017-02-22 15:56:37 -05:00
Rejeesh Kutty 273073a584 daq2/kcu105- xcvr procedure 2016-10-10 11:12:47 -04:00
Rejeesh Kutty ce1fed1ce6 dmafifo- adc/dac split 2016-08-16 12:54:39 -04:00
Rejeesh Kutty 5d93e542ed daq2-kcu105: 2016.2 updates 2016-08-11 10:00:41 -04:00
Rejeesh Kutty 89c7a4de79 daq2/kcu105- parameter changes 2015-08-27 11:18:00 -04:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
Istvan Csomortani 15618c9edf daq2 : Integrate the DACFIFO into the supported projects.
+ All pack/unpack logic is made by the cpack and upack modules.
+ The DAC FIFO is integrated between the TX DMA and cpack.
+ All the top files are updated, all the projects compiled successfully.
2015-05-11 12:20:50 +03:00
Rejeesh Kutty db004641d3 kcu105: dmafifo address width change 2014-11-20 09:28:03 -05:00
Rejeesh Kutty 3915f7d5f4 daq2: kcu105 dma-fifo changes 2014-11-12 15:25:13 -05:00
Rejeesh Kutty d1e3993bd0 kcu105: daq2 updates 2014-10-27 09:59:56 -04:00
Rejeesh Kutty fb5d212370 daq2/kcu105: fixed timing violations 2014-09-19 15:55:42 -04:00
Rejeesh Kutty b58e425b44 daq2/kcu105: timing improvement -register slices hang 2014-09-08 10:24:56 -04:00
Rejeesh Kutty b481df0b5f library: local constraints async groups 2014-08-14 15:09:51 -04:00
Rejeesh Kutty db2386a351 daq2/kcu105: latest mig updates 2014-07-23 16:25:55 -04:00
Rejeesh Kutty e7d5d79e42 daq2/kcu105: gth up and running - as it is commit 2014-07-10 10:56:37 -04:00
Rejeesh Kutty 7efd6149f8 daq2: initial checkin 2014-06-12 15:54:25 -04:00