pluto_hdl_adi

Commit Graph

Author	SHA1	Message	Date
Rejeesh Kutty	bb9cb86f34	adc/dac- fifo constraints	2016-08-11 10:00:41 -04:00
Istvan Csomortani	255b0ebd40	util_dacfifo: Add dac_xfer_out control The dac_xfer_out control signal is asserted while the DAC reads back data. Should be connected to upack/dma_xfer_in.	2016-03-29 16:50:00 +03:00
Istvan Csomortani	373481360b	util_dacfifo: Add a bypass option to the FIFO	2016-03-21 14:14:43 +02:00
Istvan Csomortani	8321d5a4fb	util_dacfifo: Update read out method Update the way how the fifo push out its content. By default the fifo pushes out all its content, if an xfer_last signal is received, the fifo saves the last write address, and reads out until the saved address.	2015-10-08 17:13:12 +03:00
Istvan Csomortani	884973fdbb	util_dacfifo: Cosmetic changes	2015-09-25 17:41:44 +03:00
Istvan Csomortani	57cfb7cfb1	hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N	2015-08-19 14:11:47 +03:00
Istvan Csomortani	9934cce5d2	util_dacfifo: Add CDC logic for dma_lastaddr register.	2015-05-11 12:20:46 +03:00
Istvan Csomortani	a7c96fdac8	util_dacfifo: General clean up of the IO, input/output data has the same width	2015-05-06 16:32:44 +03:00
Istvan Csomortani	9fba4cb2ef	util_dacfifo: Add support for Slave AXI stream interface. The FIFO can be initialized through an AXI stream interface too.	2015-04-27 10:40:55 +03:00
Istvan Csomortani	a100ecd308	util_dacfifo: Update BRAM DAC Fifo The fifo will be placed between the DMAC and the Upack module, all the interfaces were updated.	2015-04-21 15:45:56 +03:00
Istvan Csomortani	b7d8e38c94	util_dacfifo: General update + Clean out the code, delete unnecessary flops + Add support for channel count (C_CH_CNT) + FIFO write (data from DMAC/upack) : valid just when xfer_req is asserted, address is free running, new xfer_req resets the address + FIFO read (data to DAC) : free running, reads to max address	2015-04-09 11:43:37 +03:00
Rejeesh Kutty	056d6bbf40	dacfifo: added	2015-04-07 15:55:29 -04:00

12 Commits (369dad60b0928667b8e0d438591f1a6a46cb95bb)