9fa3131858
axi_fifo2dac: Initial commit
...
BRAM fifo for high speed DACs
2015-04-07 17:46:36 +03:00
de2c3764d6
util_upack: Updated IP, added upack_valid and dma_xfer_in/dac_xfer_out ports.
2015-04-07 16:55:25 +03:00
8af60576cd
dma: constraints
2015-04-06 13:38:31 -04:00
f79a152958
Makefiles: updated all makefiles adding clean functionality
2015-04-03 11:57:54 +03:00
ba2e635918
makefile: added
2015-04-01 16:28:20 -04:00
2f41aebaa9
makefile: added
2015-04-01 16:28:19 -04:00
a5f937a96d
makefile: added
2015-04-01 16:28:18 -04:00
8b09fedae9
makefile: added
2015-04-01 16:28:16 -04:00
64601272da
makefile: added
2015-04-01 16:28:15 -04:00
e0c7ad802a
makefile: added
2015-04-01 16:28:14 -04:00
b0db485e0d
makefile: added
2015-04-01 16:28:13 -04:00
a10c7a4245
makefile: added
2015-04-01 16:28:11 -04:00
afb7115b2f
makefile: added
2015-04-01 16:28:10 -04:00
90298816e4
makefile: added
2015-04-01 16:28:09 -04:00
96c81013ac
makefile: added
2015-04-01 16:28:08 -04:00
20280fecbe
makefile: added
2015-04-01 16:28:06 -04:00
8ec8c966b1
makefile: added
2015-04-01 16:28:05 -04:00
63efcbf4ca
makefile: added
2015-04-01 16:28:04 -04:00
1d3129a600
makefile: added
2015-04-01 16:28:03 -04:00
00411a53da
makefile: added
2015-04-01 16:28:01 -04:00
15c25ac45b
makefile: added
2015-04-01 16:28:00 -04:00
a63d4ae65c
makefile: added
2015-04-01 16:27:59 -04:00
4222b35292
makefile: added
2015-04-01 16:27:58 -04:00
9ced8643c6
makefile: added
2015-04-01 16:27:56 -04:00
109a38e0e8
makefile: added
2015-04-01 16:27:55 -04:00
871460016d
makefile: added
2015-04-01 16:27:54 -04:00
c0a4c6e046
makefile: added
2015-04-01 16:27:52 -04:00
5a5ffb7745
makefile: added
2015-04-01 16:27:51 -04:00
54ee0a0273
makefile: added
2015-04-01 16:27:50 -04:00
3dbbb4e5bb
makefile: added
2015-04-01 16:27:49 -04:00
566e8d7fd3
makefile: added
2015-04-01 16:27:47 -04:00
500f71af2f
makefile: added
2015-04-01 16:27:46 -04:00
4e7538fc8b
makefile: added
2015-04-01 16:27:45 -04:00
13a40af558
makefile: added
2015-04-01 16:27:44 -04:00
36b629dab1
makefile: added
2015-04-01 16:27:42 -04:00
856220e9e9
makefile: added
2015-04-01 16:27:41 -04:00
43f5025ecd
makefile: added
2015-04-01 16:27:40 -04:00
5b18d12c23
makefile: added
2015-04-01 16:27:39 -04:00
f20ab424f7
makefile: added
2015-04-01 16:27:37 -04:00
4ab17615ce
makefile: added
2015-04-01 16:27:36 -04:00
234d4ae7f3
makefile: added
2015-04-01 16:27:35 -04:00
55406b7a61
makefile: added
2015-04-01 16:27:34 -04:00
6cff03390c
makefile: added
2015-04-01 16:27:32 -04:00
a97fc603f8
makefile: added
2015-04-01 16:27:31 -04:00
35205c43a1
makefile: added
2015-04-01 16:27:30 -04:00
1b5737968a
makefile: added
2015-04-01 16:27:29 -04:00
6ac43fe516
makefile: added
2015-04-01 16:27:27 -04:00
c2e626d0b6
axi_hdmi_tx: es split
2015-04-01 15:08:24 -04:00
3bca324c33
hdmi_rx: 64bit + es split
2015-04-01 14:25:55 -04:00
56165b89f7
hdmi_rx: 64bit + es split
2015-04-01 14:25:49 -04:00
01d0b495ec
hdmi_rx: 64bit + es split
2015-04-01 14:25:45 -04:00
d4763fe356
hdmi_rx: 64bit + es split
2015-04-01 14:25:41 -04:00
11d94b736a
util_gmii_to_rgmii: Added to dev branch
2015-04-01 17:22:49 +03:00
ae26c7817e
Remove util_sync_reset
...
The util_sync_reset peripheral hasn't been used in a while and will not be
used in new projects. So remove it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-01 14:46:41 +02:00
fd7a423f74
axi_dmac: Reset data stream resize blocks when disabled
...
When the DMA controller gets disabled in the middle of a transfer it is
possible that the resize block contains a partial sample. Starting the next
transfer the partial sample will appear the begining of the new stream and
also cause a channel shift.
To avoid this make sure to reset and flush the resize blocks when the DMA
controller is disabled.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-01 14:18:34 +02:00
2d7bae2ba6
axi_mc_controller: Added delay module
2015-04-01 12:22:20 +03:00
de12184038
axi_mc_speed: Updated for motor control revision 2
2015-04-01 11:43:22 +03:00
d5fa0071bd
axi_mc_current_monitor: Updated for motor control revision 2
2015-04-01 11:42:28 +03:00
6ee66df41e
axi_mc_controller: Updated for motor control revision 2
2015-04-01 11:41:33 +03:00
4b1d9fc86b
axi_dmac: Modified in order to avoid vivado crash
2015-04-01 11:39:25 +03:00
e116822059
imageon_zc706: Updates and fixes
...
+ sync the sof to the dma_de signal
+ hdmi_rx_dma is connected to the HP1
+ fix syncronization signal in the CSC module
+ hdmi_rx_clk is asynchronous
2015-03-27 18:57:32 +02:00
0e1a60e8b7
axi_dmac: Brought up the transfer request signal for the dest_fifo and dest_axi_stream interface.
2015-03-26 12:20:32 +02:00
6ee9b3a1e2
util_wfifo: Fixed reset
2015-03-25 15:34:21 +02:00
552d9b41f7
imageon: updates
2015-03-24 15:08:48 -04:00
b29e97f985
hdmi_rx: imageon updates
2015-03-24 15:08:48 -04:00
ffe410b2dd
hdmi_rx: imageon updates
2015-03-24 15:08:48 -04:00
09bb184505
hdmi_rx: imageon updates
2015-03-24 15:08:48 -04:00
f92011f72d
hdmi_rx: imageon updates
2015-03-24 15:08:48 -04:00
5d50d38c66
hdmi_rx: imageon updates
2015-03-24 15:08:48 -04:00
80c2a5a45d
axi_hdmi_rx: General clean up
2015-03-23 12:39:26 +02:00
8f5551718e
axi_fifo2s: false paths on up_xfer_toggle
2015-03-19 16:33:14 -04:00
7e15fd9e5b
util_upack: Fixed ip
2015-03-19 16:22:12 +02:00
bc04e5a4ce
axi_i2s_adi: Fixed pins directions
2015-03-12 17:22:52 +02:00
8dfcbdfd48
gt_channel/gt_common: simulation parameter warning fix
2015-03-06 12:36:07 -05:00
57e1f0e334
gt_channel/gt_common: simulation parameter warning fix
2015-03-06 12:36:03 -05:00
2d01955042
up_gt: change version dfe/lpm support
2015-03-05 09:47:16 -05:00
6995f63134
Add version check to adi_ip.tcl too.
2015-03-05 11:55:09 +02:00
1613f7fb41
cftl_cip: Add util_pmod_fmeter IP to library
...
Frequency meter IP for CN0332.
2015-02-23 17:20:12 +02:00
65bda6505e
axi_dmac: Correctly handle shutdown for the request splitter
...
We need to make sure to not prematurely de-assert the s_valid signal for the
request splitter when disabling the DMAC. Otherwise it is possible that
under certain conditions the DMAC is disabled with a partially accepted
request and when it is enabled again it will continue in an inconsistent
state which can lead to transfer corruption or pipeline stalls.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:23 +01:00
731e1c0996
axi_dmac: Use internal enable signal for the request generator
...
All components should use the internal 'do_enable' signal instead of the
external 'enable' signal. The former correctly incorporates the shutdown
sequence and does not get asserted again until the shutdown has been
completed. Using the external signal can cause problems when it is disabled
and enabled again in close proximity.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:23 +01:00
582ea06918
axi_dmac: request_generator: Stop generating requests when disabled
...
Currently when the DMAC gets disabled the request_generator will still
generate all remaining burst requests for the currently active transfer.
While these requests will be ignored by the source and destination component
this can still take a fair amount of time for long transfers.
So just stop generating burst requests once the DMAC is being disabled.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:23 +01:00
aa594e15f3
axi_dmac: fifo_inf: Handle overflow and underflow correctly
...
Refactor the fifo_inf modules to always correctly generate the underflow and
overflow status signals. Before it was possible that in some cases they
were not generated when they should have been.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-02-19 17:22:21 +01:00
6edcaa478a
adi_ip: updates for 2014.4
2015-02-19 11:11:39 -05:00
9cdec38532
gt- report device type
2015-02-17 11:43:57 -05:00
2442b6e929
gt- report device type
2015-02-17 11:43:50 -05:00
fccadcec31
jesd_gt: lpm/dfe programmable
2015-02-13 11:33:25 -05:00
de043ce130
gt_channel: lpm/dfe programmable
2015-02-13 11:33:04 -05:00
870ebdb562
up_gt: support lpm mode
2015-02-12 16:21:11 -05:00
1e7c9a3924
gt_es: support lpm mode - 2/2
2015-02-12 16:20:43 -05:00
0a8e6f62ef
gt_es: support lpm mode - 1/2
2015-02-12 15:15:18 -05:00
9e2e2ef44e
xfer-logic: stretch toggles to allow capture
2015-02-06 22:15:16 -05:00
e9231c8f36
xfer-logic: stretch toggles to allow capture
2015-02-06 22:15:14 -05:00
518d842af9
upack: initial commit
2015-02-06 15:15:33 -05:00
d02c21b426
util_pmod_adc: General update
...
Redesign the state machine, rename constant and variable names, add notes and description.
2015-02-04 14:49:16 +02:00
96899313d8
axi_dmac: Fix constraint
...
Change the constraint file extension to .xdc, no more need for the .tcl workaround.
2015-01-23 18:51:25 +02:00
b10ba49425
axi_dmac: Fix constraint related issue
...
Tcl command "if" is not supported by Vivado XDC, therefore the tool throw some critical warnings, and does not
apply the constraints, which can cause timing violations at case of some carriers.
The following solution is much more compact and is supported by the XDC, and more importantly prevents
unwanted critical errors and timing violations.
2015-01-23 18:44:17 +02:00
d5bd485624
axi_dmac: Fix eot issue under 2014.4
...
Vivado 2014.4 is too greedy, when it needs to optimize. See more about the issue here: https://ez.analog.com/thread/48214
The response_dest_resp is unused, so not save to concatenate with a valid signal like the eot.
2015-01-23 18:39:33 +02:00
659e0cca4e
cftl_cip: Initial check in.
...
Project cftl_cip supports the following Circuits from the Lab pmods:
+ EVAL-CN0350-PMDZ
+ EVAL-CN0335-PMDZ
+ EVAL-CN0336-PMDZ
+ EVAL-CN0337-PMDZ
Note: Additional testing needed!
2015-01-23 18:29:32 +02:00
5a1819ed6e
fifo2s: qualify last with valid
2015-01-15 15:42:10 -05:00
debbe31713
Merge remote-tracking branch 'origin/master' into dev
2015-01-09 11:12:56 -05:00
63633a0fa5
ad9739a: constraints
2015-01-08 10:25:45 -05:00
ed73a9d1cf
ad9739a: updated to ad9739a
2015-01-08 10:25:15 -05:00
14df46c193
library: Initial commit of axi_hdmi_rx ip core
...
Status unknown, NOT tested.
2015-01-08 16:58:56 +02:00
9f485f2f4e
common: Add register map module for HDMI receiver.
2015-01-08 12:24:47 +02:00
161e6cc70d
common: Add color space sampling and color space conversion modules
...
This two module are used by the HDMI receiver.
2015-01-08 12:24:46 +02:00
ad4b4f64d0
ad9739a: ad9122 copy
2015-01-07 15:36:02 -05:00
3a4d765a2b
up_clkgen: reading typo
2015-01-07 14:02:39 -05:00
b65bcab8d6
up_clkgen: reading typo
2015-01-07 13:58:43 -05:00
5f93c859b5
util_rfifo: renamed ports to make vivado happy
2015-01-06 16:16:42 -05:00
8056574bae
util_wfifo: renamed ports to make vivado happy
2015-01-06 16:16:25 -05:00
0291bb3bf7
util_rfifo: port name fixes & doc.
2015-01-06 16:15:51 -05:00
36b041ccc0
util_wfifo: port name fixes & doc.
2015-01-06 16:15:42 -05:00
ee0912eb6a
ad9361: make 2t2r external for mw
2015-01-05 10:54:23 -05:00
c3529f112f
up_gt: move status to up clock
2014-12-19 13:00:27 +02:00
f4774d6f98
fifo2s: false path typo on source signals
2014-12-19 13:00:13 +02:00
1d6ea64d04
up_gt: move status to up clock
2014-12-16 08:48:13 -05:00
16f64a75d6
fifo2s: false path typo on source signals
2014-12-15 13:00:13 -05:00
04c10abc2f
gth/gtx: share same cpll/qpll cpu settings
2014-12-11 11:18:48 -05:00
c4152627f0
plddr3: Sync adc_wcnt_int to adc_wr and fix adc_dwr pulse width
...
The adc_wcnt_int must be synchronized to adc_wr. The adc_dwr signal pulse width was to long,
it needs to be just one adc_clk cycle.
2014-12-09 13:59:19 +02:00
19732d89fb
plddr3: Fix the adc_dwr pulse width
...
The adc_dwr signal pulse width was to long, need to be just one adc_clk cycle.
2014-12-09 13:51:00 +02:00
6aad2fbbb2
axi_hdmi_tx: Fixed typo in altera related core
2014-12-09 10:19:03 +02:00
6f8c259961
axi_hdmi_tx: Fixed typo in altera related core
2014-12-09 09:56:14 +02:00
a70d27c094
axi_mc_speed: updated core to latest axi interface implementation
2014-12-05 11:53:11 +02:00
26f58914e2
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:53:06 +02:00
7e8e1e4fd0
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:52:59 +02:00
ea1a50c985
axi_mc_speed: updated core to latest axi interface implementation
2014-12-05 11:46:20 +02:00
0d2888a5a6
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:45:37 +02:00
21591dc485
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:43:59 +02:00
6197563506
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
8cc9adfc49
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:22:28 +01:00
afddc45ba4
library/ccat: initial commit
2014-11-25 12:59:51 -05:00
196e8b119c
library/bsplit: initial commit
2014-11-25 12:59:50 -05:00
403f8c0631
util_cpack: ipi doesn't like local params
2014-11-21 15:32:13 -05:00
3b500bafcc
util_cpack: add port controls on ipi
2014-11-21 15:32:12 -05:00
5ca2944b70
library/util_cpack: initial checkin
2014-11-21 15:32:10 -05:00
42874bfe81
prcfg_library: Major update
...
Get rid of the QPSK symbol wrapper for now. The DMA data path is using the 2 LSB bits.
2014-11-18 10:05:52 +02:00
a4724f8396
es: added kcu105 gth
2014-11-17 09:55:12 -05:00
b1c91fac92
es: added kcu105 gth
2014-11-17 09:55:10 -05:00
fd305f2eff
es: added kcu105 gth
2014-11-17 09:55:09 -05:00
6dd1226696
axi_ad9643: Fixed constraint file
2014-11-17 12:12:09 +02:00
8831d9dbd7
axi_ad9122: fixed constraint file
2014-11-17 12:11:20 +02:00
2744d0cb37
util_wfifo: Update to implement flip flops
2014-11-17 12:10:21 +02:00
41ffc66c26
fifo2s: removed m interface
2014-11-13 15:00:03 -05:00
8761db438e
axi_fifo2f: common interface with fifo2s
2014-11-12 15:15:32 -05:00
925e966eb6
axi_fifo2s: fifo full replaced with ready
2014-11-12 14:43:47 -05:00
5fc4f1b000
axi_fifo2s: buswidth fix
2014-11-12 14:43:46 -05:00
d204a7c2b7
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:44 -05:00
e7cec7171e
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:43 -05:00
4381f20a6a
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:42 -05:00
9f2dbad539
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:41 -05:00
e683b5868e
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:40 -05:00
81b4cd532d
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:38 -05:00
888ab888d2
axi_fifo2s: include bus width/clock transfer
2014-11-12 14:43:37 -05:00
f8e7796592
axi_jesd_gt: Fix lane number parameters
2014-11-12 17:43:32 +02:00
bf62665c56
prcfg_qpsk: Add Simulink model
...
Matlab version used: R2014a, HDL Coder 3.3
2014-11-12 15:44:38 +02:00
64ec633438
gt: asymmetric no of lanes
2014-11-11 08:54:24 -05:00
cb15567a56
ad6676: added
2014-11-10 13:36:07 -05:00
c6df568a00
Revert "ad_interrupts: Initial check in."
...
This reverts commit b254380338
2014-11-06 12:16:52 +02:00
b11d80ed98
ad_rst: changed to dual stage
2014-11-05 16:48:02 -05:00
74ec396b27
ad_rst: ultrascale -dual stage
2014-11-05 16:47:41 -05:00
d69ccebbde
ad9234: full 16bit samples
2014-11-05 11:59:08 -05:00
403fe1b373
wfifo: read only if ready is asserted
2014-10-31 13:05:17 -04:00
38652b1c3e
axi_ad9643: Added constraint file
2014-10-31 17:57:47 +02:00
3e9ce71d21
axi_ad9122: Added constraint file
2014-10-31 17:56:56 +02:00
d596d71285
prcfg_qpsk: Swap the I/Q pair nets between the filter and the demodulator.
...
This fix the wrong symbol mapping issue.
2014-10-31 12:14:52 +02:00
eb520b1f75
prcfg_qpsk: Major update
...
Add a symbol wrapper to the logic. Wraps the 32 bit data to 2 bit symbols.
2014-10-31 12:10:59 +02:00
ea194755e1
prcfg: Upgrade the QPSK logic
...
Regenerate the qpsk logic, with the new HDL coder, and modify the design to support the new files.
2014-10-31 11:59:29 +02:00
9818bcb601
axi_fifo2f: internal memory low overhead
2014-10-30 11:12:10 -04:00
17cb1d9585
common/mem: asymmetric version
2014-10-30 11:12:09 -04:00
6470ea91ad
axi_fifo2f: fake version
2014-10-30 11:12:08 -04:00
f9628262aa
axi_dmac: Add xfer_req signal to the streamin AXI source interface
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-29 18:15:54 +01:00
fbce64411e
axi_ad9671: added synchronization interface to altera core
2014-10-29 18:20:26 +02:00
36c7034bd6
ad7175: Fix dma issues
2014-10-28 16:00:06 +02:00
9c8fe5f09c
ad7175: Removed unused files
2014-10-28 14:30:41 +02:00
9e1d1c1b49
ad7175: Updated the AD7175 IP and project
2014-10-28 14:28:38 +02:00
b254380338
ad_interrupts: Initial check in.
...
Initial check in of the interrupt concatenation block.
2014-10-27 19:34:34 +02:00
e086f5eb9f
axi_ad9361: Updated core with the new up_adc_common register set
2014-10-27 19:26:40 +02:00
7e52cf9568
up_axi: timeout generating multiple/repeated acks
2014-10-23 13:51:33 -04:00
3dbfa8cda6
ad9434_fmc: Fix PN monitor and device interrupt
2014-10-23 11:29:14 +03:00
b9ca616150
Merge branch 'dev' of https://github.com/analogdevicesinc/hdl into dev
2014-10-23 06:11:52 +03:00
da8454ae4c
axi_ad7175: Added the AD7175 IP
2014-10-23 06:11:41 +03:00
6f723ef9e5
axi_jesd_gt: lane mux on char qualifiers
2014-10-22 15:29:25 -04:00
fe92b8b210
axi_ad9671: Updated synchronization mechanism to have a software defined starting code
2014-10-22 13:10:28 +03:00
121a416916
axi_dmac: Fixed constraints for axi_dmac core
2014-10-22 13:07:55 +03:00
1d26639d73
common: Added synchronization mechanism to the up_adc_common module
2014-10-22 10:05:55 +03:00
4b19646ed9
ad9434_fmc: Fix samples order.
...
Four consecutive samples were reversed.
2014-10-21 16:34:28 +03:00
46d1710539
axi_ad9625: added constraints
2014-10-17 13:57:30 -04:00
37b608f397
axi_ad9144: added constraints
2014-10-17 13:57:09 -04:00
df3915e2b0
ad9625: constraints added
2014-10-17 13:41:56 -04:00
819a3d0802
util_adc_pack: removed latches
2014-10-17 15:40:16 +03:00
9d43a08865
gt: constraint modifications
2014-10-15 14:51:01 -04:00
86724f7fc7
gt: tx lane interleaving
2014-10-15 14:51:00 -04:00
206b96d55a
ip: constraint changes
2014-10-15 14:50:58 -04:00
f0b25c39a3
wfifo: added axi stream support
2014-10-15 14:50:56 -04:00
51a15a28b7
axi_fifo2s: added constraints
2014-10-15 14:50:53 -04:00
8934a66013
usdrx1: Update project so that the AD9671 cores can be synchronized
2014-10-13 17:06:40 +03:00
3d5ef9a8ed
util_dac_unpack: Fix unpack order with 1 channel
...
Due to the delay between the dac_valid and the fifo_valid signal we need to
have two counters. One counter which counts the number of incoming
dac_valid signals and generates the dma_rd signal and one counter for the
offset which gets set to 0 when fifo_valid is set.
This fixes issues with the unpack order when only one channel is active.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:14 +03:00
dd70320b00
axi_spdif: Add missing signals to the regmap read sensitifity list
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:09 +03:00
e7af6219dd
axi_spdif: Don't use non-static expressions in port assignments
...
Fixes a warning from the tools.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:05 +03:00
ab5eee42e4
axi_spdif: Set unused signals to 0
...
Fixes warnings about undriven signals from the tools.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:00 +03:00
0b587e6fb1
axi_i2s: Add missing signals to the regmap read process sensitivity list
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:56 +03:00
cf2bbf66b7
axi_i2s: Set unused signals to 0
...
Fixes warnings from the tools about undriven signals.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:51 +03:00
22169c4a9c
axi_dmac: Add default driver values for optional input ports
...
This silences warnings from the tools about undriven ports.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:46 +03:00
e7dbdff60c
axi_dmac: Hide fifo_wr_sync signal if C_SYNC_TRANSFER_START != 1
...
The fifo_wr_sync signal is only used when C_SYNC_TRANSFER_START = 1, so hide it otherwise.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:41 +03:00
8557073b56
axi_dmac: Hide fifo_wr bus when source type is not the fifo interface
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:33 +03:00
3e6f553ce3
axi_dmac: Add clock signal spec for m_axis/s_axis bus
...
This silences warnings from the tools about having no clock assigned to the bus.
Also fix the name of the TVALID signal.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:24 +03:00
c2ed80e8bb
axi_dmac: Drive unused signals to 0
...
This silences a few warnings from the tools about undriven signals.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:49 +03:00
aee95ebe96
axi_dmac: Fix dummy AXI a{r,w}len fields width
...
The dummy a{r,w}len fields should have the same width as the real a{w,r}len
fields in order to not break auto AXI bus version detection.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:43 +03:00
4f53a69f3c
util_dac_unpack: Hide unused signals
...
Hide unused signals based on the number of selected channels. This silences
a few warnings from the tools about unconnected pins.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:37 +03:00
77133fe60a
util_adc_pack: Hide unused signals
...
Hide unused signals based on the number of selected channels. This silences
a few warnings from the tools about unconnected pins.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:29 +03:00
3ab0f417b4
util_dac_unpack: Don't use localparam symbols in input/output signals
...
When using a localparam for the width of a input/output signal the tools
won't be able to infer the size of the signal. This results in the signal
always being only 1 bit wide which causes the design to not work.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:19 +03:00
04e4458ee1
util_dac_unpack: Drive unused ports to 0
...
Silences a few warnings about undriven ports from the tools.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:12 +03:00
61be003017
axi_i2s/axi_spdif: Create clock and reset interface for DMA bus
...
This avoids some critical warnings from Vivado that the DMA bus does not has any associated clocks.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:11:41 +03:00
58cbe1813d
scripts/adi_ip: Add helper function to create bus clock and reset interface
...
Add a helper function that can be used to register a clock and a reset interface for the clock and reset signals of a bus.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:11:31 +03:00
a31cb6c475
axi_i2s/axi_spdif: Remove manual creation of Streaming AXI bus
...
It looks like Vivado is now able to infer these buses from the sources.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:11:06 +03:00
4bdb3cd262
axi_ad9671: altera axi4lite changes
2014-10-09 15:25:07 -04:00
6125bbecc3
axi_ad9671: altera axi4lite changes
2014-10-09 15:25:06 -04:00
2817ccdb22
up_axi: altera can not handle same clock assertion of arready and rvalid
2014-10-09 15:25:05 -04:00
5565cf8fad
axi_ad9467: Independent read/write update
...
Independent read/write operation is supported on "up" interface
2014-10-08 11:23:44 +03:00
88a3b7f8fd
library: remove all constraints for now
2014-10-07 16:59:19 -04:00
2dfcb0c599
usdrx1: Initial commit for a5gt
...
axi_ad9671: added start of frame information to the altera core.
2014-10-07 19:41:54 +03:00
a436153a48
axi_ad9434: Independent read/write update
...
Independent read/write is supported on "up" interface.
2014-10-07 18:01:44 +03:00
9404e93126
ad9434_fmc: Fix PN monitor.
...
No need to flop the incoming data.
2014-10-07 17:56:27 +03:00
66baf6ac3e
axi_ad9434: Deleted unused ip file
...
ad_lvds_in.v is not used in this ip core.
2014-10-07 17:47:08 +03:00
bfa17844ff
ad_serdes_in: General update
...
Added a parameter for option SDR / DDR mode, added a parameter for parallel data width.
Note: default IF_TYPE is SDR and default PARALLEL_WIDTH is 8
2014-10-07 17:42:27 +03:00
151781a2af
axi_ad9467: Fix PN sequence checker
...
Make sure that the reference PN sequence is only incremented every two clock
cycles to make sure that it matches the rate of the ADC PN sequence.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-07 16:26:53 +03:00
59640f181b
ad9467: Fix LVDS delay interface.
2014-10-07 16:25:22 +03:00
c375b5b26e
daq3: vivado build
2014-10-06 10:34:02 -04:00
d47776a4a0
ad9152: 9144 copy
2014-10-06 10:34:01 -04:00
581892b22a
axi_ad9265: Updated project with new up independent read/write
2014-10-03 12:32:08 +03:00
de33722470
up/constr: independent read/write and local constraints
2014-10-02 14:35:59 -04:00
922bc6f03a
fmcadc3: 16bit - but ignored 4 lsb(s)
2014-09-29 15:26:30 -04:00
6a09a1ed19
ad9434: Fix the processor read interface
...
Fix the processor read interface, preventing to have nets with multiple drivers. Made a few cosmetic changes in the code too.
2014-09-25 16:51:58 +03:00
ccb0b135ca
ad9434: Fix the adc to dma interface.
...
All the device2dma interfaces needs to have a generic form : (data, enable, valid)/channel
2014-09-25 16:50:09 +03:00
d5f4991e26
ad9434: Merge the ad9434_if interface data outputs into one single bus
2014-09-25 16:45:12 +03:00
079ed0ffb3
ad_serdes_in: Update the serdes_in module
...
Add additional IDELAY block before the ISERDES. Delet the IDDR blocks. Be aware, the ISERDES block are running in DDR mode. If the interface is SDR the maximum parallel data width is 4.
2014-09-25 16:40:29 +03:00
27ffff827a
common: Initial check in of ad_serdes_in.v
...
A generic serdes module for input interface, support both 6 and 7 series.
2014-09-24 18:34:40 +03:00
683561b67d
AD9434: Initial check in of the library and project with ZC706
2014-09-24 18:27:17 +03:00
1d4bc47cea
ad9265: Initial commit
2014-09-23 22:51:42 -04:00
5af2474d51
usdrx1: axi_ad9671 / axi_jesd_gt added signal for frame synchronization
2014-09-23 22:44:33 -04:00
1682d9da10
fmcadc3: initial updates
2014-09-22 11:27:17 -04:00
e528ee0b52
axi_ad9234: axi_ad9680 copy
2014-09-22 11:27:15 -04:00
de0edc2083
axi_dmac: src_fifo_inf: Clear pipeline when no transfers are active
...
Clear the pipeline when no transfers are active to make sure that we do not
get residual data on the first sample for the next transfer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-16 21:02:05 +02:00
c927e90ee1
axi_dmac/axi_fifo: Add missing file
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-15 21:04:57 +02:00
17a993032b
util_dac_unpack: Make number of channels and channel width configurable
...
Always using 128bit for the input word unnecessarily increases the DMA
alignment requirements. This breaks existing software which assumes that the
DMA alignment requirement is 64bit.
So make it configurable whether we want 8 or 4 channels and while we are at
it also make the channel width configurable.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-12 16:14:04 +02:00
61f21a17b3
fmcomms2:c5soc project upgraded with util_dac_unpack
2014-09-11 15:13:09 -04:00
3162540b03
axi_ad9361: Remove the Altera toplevel wrapper
...
By setting the AXI controler interface type from axi4 to axi4lite we can use
the normal toplevel file with only a simple modification to add the awprot
and arprot signals.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:29:13 +02:00
36422f0454
axi_dmac: Remove Altera toplevel wrapper
...
We can remove the Altera toplevel wrapper if we switch the axi4 control bus
to axi4lite and add the few missing signals that are required by the Altera
interconnect to both the control and the data buses.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:28:14 +02:00
b877cea2ed
up_axi: Add parameter to configure the internal address width
...
Not all peripherals need 14 bit of address space.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:40 +02:00
41cc92ef49
Remove BASEADDR/HIGHADDR parameters
...
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Istvan Csomortani
Adrian Costina
Rejeesh Kutty
Lars-Peter Clausen
acozma