Commit Graph

279 Commits (3e18291d3921c12f3340b83ed253784a68da4d17)

Author SHA1 Message Date
Istvan Csomortani 335fef0f42 ad_axi_ip_constr: Split up this constraint file into separate files
For experimentation, to solve a constraint scoping issue, split up the
ad_axi_ip_constraint file into separate constraints file, in function
of there parent module.
2017-03-29 18:31:40 +03:00
Rejeesh Kutty b0e88eb5ff axi_ad9361- add receive init delay 2017-03-13 16:28:24 -04:00
Istvan Csomortani 1d6ddacfd6 axi_ip_constr: Fix constraints
The filter for CDC registers were too generic, and a few non-CDC
register were set as asynchronous register.
2017-02-27 16:25:09 +02:00
Istvan Csomortani 2da7dd4079 axi_ip_constr: Update constraints
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-23 11:33:25 +02:00
Rejeesh Kutty db924953bb altera- warnings about init values 2017-01-30 10:01:28 -05:00
Adrian Costina 3f3a8bd267 library: forced ad_mem module to be implemented in BRAM for Xilinx devices 2017-01-25 18:12:04 +02:00
Rejeesh Kutty c0a2ef1ac4 library- altera power up warnings 2016-12-20 16:18:15 -05:00
Istvan Csomortani ce47cf8d30 ad_sysref_gen: Fix sysref generation
Toggle sysref output just if the sysref_en is asserted.
2016-12-19 18:02:49 +02:00
Istvan Csomortani a228c05bd3 common: Add a SYSREF generation module
The SYSREF generator is using a simple free running counter,
which runs on the JESD204 core clock. The period can be
configured using a parameter, it must respect the constraints
defined by the JESD204 standard.
The generator can be enabled through a GPIO line.
2016-12-17 11:12:10 +02:00
Istvan Csomortani a00d9870be axi_ip_constr: Fix constraints
Modify a contraint for a false path, so it will be applied to
up_delay_cntr module too.
2016-12-16 12:01:38 +00:00
Istvan Csomortani 12d6e46ae7 clean: Delete deprecated source files
The axi_jesd_gt was repleaced by axi_adxcvr IP, which is located
at library/xilinx and library/altera.
The axi_jesd_xcvr was an early version of axi_adxcvr.
The register map is moved to the IP's directory.
2016-11-14 10:43:46 +02:00
Istvan Csomortani 5eff357568 up_tdd_cntrl: Fix memory map register writes 2016-11-01 10:06:57 +02:00
Istvan Csomortani 8e25bc01b3 all: Change tab to double space
Occasional file parsing and restructuring become a pain, if tabs exists
in code. General rule of the repos is tab always a double space.
2016-10-01 18:13:42 +03:00
Rejeesh Kutty 6735333aea common- dac data path split 2016-09-23 16:13:24 -04:00
Rejeesh Kutty 8729af1b91 common- adc- data path disable split 2016-09-23 13:40:35 -04:00
Rejeesh Kutty 78f7384150 ad9361- vivado synthesis warnings fix 2016-09-22 13:41:18 -04:00
Istvan Csomortani 2b6eb1d65e up_drp: Revert some bit locations
Linuxe drivers are checking the drp_locked status even if the
core does not contains a clock generation/managment module. To
not break all the designs, revert all the status and control bits to
there old locations.
2016-09-22 16:32:42 +03:00
Istvan Csomortani a21b9fe8ff up_drp: Fix up_drp_wr 2016-09-21 17:55:58 +03:00
Istvan Csomortani 913eafed48 up_drp : Update the DRP interface to support Altera platforms 2016-09-21 15:00:45 +03:00
Dragos Bogdan 10408b8c88 up_tdd_cntrl: Set PCORE version to 1.00.a 2016-09-21 10:27:28 +03:00
Rejeesh Kutty 74bc498a6d library/common- added dac clock select 2016-08-26 10:31:00 -04:00
Rejeesh Kutty e754f0a46a up_axi- writes dropped by delayed w-responses 2016-08-14 11:21:19 -04:00
Istvan Csomortani 1d33d7d7ee lib_refactoring: Move the CMOS interface modules to ~/library/xilinx/common 2016-08-08 15:07:42 +03:00
Istvan Csomortani 90ac7b7ac9 lib_refactoring: Move all Altera module to library/altera/common
Move all Altera modules to library/altera/common, delete the
deprecated wrapper files
2016-08-08 15:07:01 +03:00
Istvan Csomortani b806fa3b42 lib_refactoring: Move all the Xilinx common modules to library/xilinx/common 2016-08-08 15:06:10 +03:00
Matthew Fornero b99117e686 up_axi: Same cycle BVALID/READY fails on Altera
The Qsys interconnect does not handle the assertion of BVALID on the
same cycle as [A]WREADY. Add a single cycle of delay to prevent
deadlocks.

Similar to:
2817ccdb22
("up_axi: altera can not handle same clock assertion of arready and rvalid")

Signed-off-by: Matthew Fornero <matt.fornero@mathworks.com>
2016-08-01 12:17:10 +03:00
Istvan Csomortani 58b220ba81 ad_tdd_control: Add an on/off switch to the receive datapath
For a more robust control, add an on/off switch to the receive datapath too,
in order to filter out transition noises.
2016-08-01 11:49:27 +03:00
Shrutika Redkar 8a2734b43e up_dac_common- typo- unf register reset 2016-07-28 13:44:57 -04:00
Rejeesh Kutty db6d5f509f library/common- xcvr interface logic 2016-07-21 16:09:33 -04:00
Rejeesh Kutty ced36f6159 up-dac- support iq mode 2016-07-21 11:58:03 -04:00
Istvan Csomortani 040f72d172 ad_mul_u16: Delete unused module 2016-07-20 14:17:04 +03:00
Istvan Csomortani 2dd6bb0cb8 up_drp_cntrl: Delete unused module 2016-07-20 14:17:04 +03:00
Istvan Csomortani af9915b060 up_axis_dma_*: Delete unused modules 2016-07-20 14:17:04 +03:00
Istvan Csomortani df43ca9332 ad_axis_dma_*: Delete unused modules 2016-07-20 14:17:04 +03:00
Istvan Csomortani 64633e519c Merge remote-tracking branch 'origin/dev_ad7616' into dev 2016-06-29 12:32:39 +03:00
AndreiGrozav aee38e1cc9 up_hdmi_tx: Fixed data path width 2016-06-14 14:27:03 +03:00
Istvan Csomortani 9d1ae436b1 common/util_pulse_gen: Rename the ad_tdd_sync module 2016-06-09 10:07:47 +03:00
AndreiGrozav f10c1e6e93 axi_hdmi_tx: Remove hdmi_full_range register 2016-05-27 14:04:40 +03:00
Rejeesh Kutty 6bc05fc844 ad_*_in: register post-iob 2016-05-16 12:19:38 -04:00
Rejeesh Kutty cd7c9c99ed ad_*_clk: altera-pll not supported by qsys flow 2016-05-16 12:19:38 -04:00
Rejeesh Kutty 9cd6e2da51 quartus-mess- altddio direct instantiation 2016-05-09 13:54:08 -04:00
AndreiGrozav 726ddb6e93 ad_lvds_clk: Fixed assignment mismatched 2016-05-09 10:32:18 +03:00
AndreiGrozav b36c722ec9 up_hdmi_tx: Discard the standard default values
Restore the base functionality of the core. Changing the data format
will not set by default its standard maximum and minimum data clipping
ranges.
2016-05-05 13:41:46 +03:00
Rejeesh Kutty d82ca5dc3c library/common- altera variations 2016-05-04 13:42:11 -04:00
Rejeesh Kutty 89f5d2394e altera- clock variations 2016-04-29 10:17:35 -04:00
Rejeesh Kutty 3563c2212c common/altera- removed dcfilt/mul 2016-04-29 10:17:35 -04:00
Rejeesh Kutty 0260280db1 common/altera- data path 2016-04-29 10:17:35 -04:00
Rejeesh Kutty ed62101308 common/altera: primitives 2016-04-29 10:17:35 -04:00
Istvan Csomortani ad227c1af0 up_axi: Wait more to a valid read acknowledge. 2016-04-25 10:34:17 +03:00
AndreiGrozav 679d471d75 Merge branch 'hdl_2016_r1' into dev
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
2016-04-19 18:05:50 +03:00
Istvan Csomortani 42cd05ab19 ad_mem_asym: Add support for more ratios.
Supported ratios: 1:1/1:2/1:4/1:8/2:1/4:1/8:1
2016-04-19 11:18:30 +03:00
AndreiGrozav 6fe41ebb08 axi_hdmi_tx: Upgrade hdmi clipping process
-added two registers that control the clipping ranges (0x01a and 0x01b)
-extend clipping process for all output data formats
2016-04-12 22:01:07 +03:00
Rejeesh Kutty 65b2e51958 common/mmcm: add another clock 2016-03-22 12:50:59 -04:00
Rejeesh Kutty 7a320a3d34 ad_lvds* - updates 2016-03-04 10:39:48 -05:00
Rejeesh Kutty 7d2939be92 ad9361- cmos mode initial commit 2016-03-04 10:39:48 -05:00
Rejeesh Kutty a8e9d72273 adc/dac - prefix parameters 2016-02-17 14:16:04 -05:00
Istvan Csomortani e381d5170c util_tdd_sync: Update the synchronization interface
Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-12 14:27:37 +02:00
Istvan Csomortani d1e638349b ad_serdes_clk : The reference clock selection line should by tied to 1
Just the CLKIN1 is used in the MMCM.
2016-01-19 11:18:00 +02:00
Istvan Csomortani 29a0f27cd1 ad_edge_detect: Add a flop to output, reset is active high 2015-12-14 15:40:29 +02:00
Istvan Csomortani 12c95b059d ad_tdd_control: Remove tdd_enable_synced control line
For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic.
This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 11:16:28 +02:00
Adrian Costina 5cf45b2978 axi_clkgen: Added phase related parameters 2015-12-02 18:50:23 +02:00
Adrian Costina 667e49fe41 library: Axi_clkgen, added register for controlling the source clock.
Address is 0x11 /0x44.
With the default value, 0, clock 1 is selected. If set to 1, clock 2 is selected
2015-11-25 11:16:32 +02:00
Istvan Csomortani 593c486168 ad_tdd_control: The state machine goes from OFF to ON, when a valid sync is received 2015-11-24 15:15:53 +02:00
Istvan Csomortani c70be7391f ad_tdd_control: Avoid unnecessary reset on control lines
No need to reset for tdd_last_burst, it's value depends on the tdd_burst_counter.
2015-11-24 15:13:18 +02:00
Adrian Costina 985f2ca020 library: ad_rst, added comment so that the registers are not minimized away 2015-11-24 10:33:38 +02:00
Istvan Csomortani 9ba8c059ce ad_tdd_sync: Fix reset value of the pulse_counter 2015-11-13 18:31:24 +02:00
Istvan Csomortani d6eae81bc1 axi_ad7616: Add the control module to the core, finish up SPI integration 2015-11-13 18:14:21 +02:00
Adrian Costina 3c27b3a4c5 ad_lvds_in: Add single ended option 2015-11-13 12:13:09 +02:00
Istvan Csomortani b17fec689e ad_tdd_control: An active sync pulse can NOT be a reset for the control lines
By reset the control lines (RF, VCO and DP) on an active sync pulse, can cause glitches on the ENABLE/TXNRX lines. The sync pulse resets just the TDD counter.
2015-11-11 11:13:33 +02:00
Istvan Csomortani fc0f4bc414 axi_ad9361: Delete the old sync generator from the core
+ Define two control signal for util_tdd_sync : tdd_sync_en and tdd_terminal_type
+ Delete to old ad_tdd_sync.v instances from the core
+ Update Make files
+ Update ad_tdd_control: add additional CDC logic for tdd_sync (the sync comes from another clock domain)
+ Update the ad_tdd_sync module: it's just a simple pulse generator, the pulse period is defined using a parameter, pulse width is fixed: 128 x clock cycle
+ Update TDD regmap: tdd sync period is no longer software defined
2015-11-11 11:06:19 +02:00
Adrian Costina e7fd964874 axi_clkgen: Added a second input clock option 2015-11-06 17:55:29 +02:00
Adrian Costina 6cfc13a9dd common: Allow for the memory to be also symetrical 2015-11-04 13:28:02 +02:00
Rejeesh Kutty f1ed27105f library/common- reset fix 2015-10-23 14:32:35 -04:00
Istvan Csomortani 8ecdb4a4ca library/tdd_control: Add common registers to the register map and fix init value of a register
+ Software in general needs to have access to the VERSION register.
+ tdd_sync_d3 registers init value should be 1'b0
2015-10-16 11:57:54 +03:00
Adrian Costina 96d363849e ad_dds: Registered dds_scale so that Vivado can optimally map the dsp block 2015-10-09 13:43:14 +03:00
Rejeesh Kutty 5c3f90a676 up_gt: separate pll resets to tx/rx 2015-10-02 13:58:30 -04:00
Istvan Csomortani 97a9ecfc9a axi_hdmi_rx: Update constraint file and fix reset line 2015-09-29 18:49:30 +03:00
Istvan Csomortani b765be568f up_gt_channel: Delete the register, which stores transceiver type
Transceiver type is stored in axi_jesd_gt/up_gt only.
2015-09-29 14:23:42 +03:00
Istvan Csomortani cffb2e6226 up_gt_channel: Move the VERSION register to up_gt_channel, in order to preserve its address 2015-09-29 14:19:52 +03:00
Istvan Csomortani a0ac0e912b up/ad_gt_common/channel: Cosmetic changes 2015-09-29 14:16:24 +03:00
Istvan Csomortani c03983ca54 ad_tdd_sync/control: Update TDD logic
+ Redesign the TDD counter FSM
+ Make the sync logic independent from the tdd control
2015-09-25 19:11:23 +03:00
Adrian Costina 884f45c81d common library: Registered dc_filter and iq_correction coefficients 2015-09-16 14:24:18 +03:00
Istvan Csomortani 5bc16159fa ad_tdd_sync: The resync will reset all the control lines 2015-09-10 11:28:36 +03:00
Istvan Csomortani 85ffc25ec5 ad_tdd_sync: Update the synchronization logic
The synchronization interface is a single bidirectional line. Output for Master, input for Slave.
The sync_period value is relative to frame length and the digital interface clock. The actual synchronization
period will be: sync_period * frame_length * fb_clock_cycle
2015-09-09 12:31:58 +03:00
Istvan Csomortani 5a566b9e5d ad_tdd_control: Add delay compensation for the control lines 2015-09-09 12:24:26 +03:00
Rejeesh Kutty 1cd3435147 up_delay_cntrl- cosmetics 2015-08-28 13:16:18 -04:00
Rejeesh Kutty 8fddf983d2 up_hdmi_tx- common/generic instance names 2015-08-27 13:17:06 -04:00
Rejeesh Kutty 20ee10ea46 common/ad_lvds_out- add single ended 2015-08-27 11:41:47 -04:00
Rejeesh Kutty ba64de228e ip-constr- register name changes 2015-08-27 11:18:00 -04:00
Rejeesh Kutty 0077117f94 dac/adc- make common instances 2015-08-21 14:41:39 -04:00
Rejeesh Kutty c45d39df51 dac/adc- make common instances 2015-08-21 14:41:35 -04:00
Rejeesh Kutty e3ec6b48fc dac/adc- make common instances 2015-08-21 14:41:30 -04:00
Rejeesh Kutty f31c1c9caa dac/adc- make common instances 2015-08-21 14:41:26 -04:00
Rejeesh Kutty e4e4700950 dac/adc- make common instances 2015-08-21 14:41:13 -04:00
Rejeesh Kutty 54b4365f6c dac/adc- make common instances 2015-08-21 14:41:09 -04:00
Rejeesh Kutty 799001403f mult-macro: use primitive parameters 2015-08-20 13:54:16 -04:00
Rejeesh Kutty b0079e60bf ad-rst - common instance for adc/dac 2015-08-20 11:37:16 -04:00
Adrian Costina 6ae0c8f85e library: Fixed changes related to parameters 2015-08-20 18:13:54 +03:00
Rejeesh Kutty 928ee4972b dac/adc-rst: common ad-rst instance 2015-08-19 14:54:43 -04:00
Rejeesh Kutty 483e375910 dac/adc-rst: common ad-rst instance 2015-08-19 14:54:38 -04:00