fcc185d769
Makefile: Updated makefiles
...
- removed up_drp_control, up_delay_control dependencies where not needed
- added axi_jesd_gt core in the library makefile
- fixed timing tcl dependency for altera projects
2015-06-25 14:59:34 +03:00
d6163bea5e
axi_jesd_gt: Fixed constraints
2015-06-10 10:56:22 +03:00
c6ebab7393
library- drp moved to up clock
2015-06-01 13:39:26 -04:00
9762c65868
library- jesd-align port name change
2015-05-20 14:25:21 -04:00
e918588a4b
library: remove axi-min-size parameter
2015-05-19 13:07:48 -04:00
d623f77453
axi_jesd_gt: Added rx_jesd_rst and tx_jesd_rst.
...
Resets for both up clock domain and rx clock domain are needed in some projects
2015-04-30 12:07:36 +03:00
a7a2d194e9
axi_jesd_gt: Switched rx_rst and rx_rst_done to up clock domain, to be compatible with xilinx JESD core
2015-04-28 15:04:18 +03:00
d42c0bc431
axi_jesd_gt : Added CDC and reset constraints
2015-04-23 11:03:51 +03:00
dc2b37bd0c
Makefile: Added top level Makefile. Modified behavior of clean and clean-all
...
Clean ran for a project will clean only the project files.
Clean-all ran for a project will clean also the library files on which the project depends.
The clean commands will only remove specific files and directories.
The top Makefile allows several options(per suggestion from jameyhicks):
make fmcomms1.zed will run "make all" in projects/fmcomms1/zed/
make clean will run "make clean" for all the projects
make clean-all will run "make clean" for all the projects and libraries
make lib will run "make all" for the library files
2015-04-17 17:22:38 +03:00
374f82e7de
makefiles: The clean command for library won't remove the xml files, except for component.xml.
...
Updated also the dmac dependencies
2015-04-16 11:53:27 +03:00
5f8e9a74ea
makefile: updated
2015-04-07 16:32:01 -04:00
f79a152958
Makefiles: updated all makefiles adding clean functionality
2015-04-03 11:57:54 +03:00
a63d4ae65c
makefile: added
2015-04-01 16:27:59 -04:00
9cdec38532
gt- report device type
2015-02-17 11:43:57 -05:00
fccadcec31
jesd_gt: lpm/dfe programmable
2015-02-13 11:33:25 -05:00
fd305f2eff
es: added kcu105 gth
2014-11-17 09:55:09 -05:00
f8e7796592
axi_jesd_gt: Fix lane number parameters
2014-11-12 17:43:32 +02:00
64ec633438
gt: asymmetric no of lanes
2014-11-11 08:54:24 -05:00
b11d80ed98
ad_rst: changed to dual stage
2014-11-05 16:48:02 -05:00
6f723ef9e5
axi_jesd_gt: lane mux on char qualifiers
2014-10-22 15:29:25 -04:00
9d43a08865
gt: constraint modifications
2014-10-15 14:51:01 -04:00
86724f7fc7
gt: tx lane interleaving
2014-10-15 14:51:00 -04:00
88a3b7f8fd
library: remove all constraints for now
2014-10-07 16:59:19 -04:00
de33722470
up/constr: independent read/write and local constraints
2014-10-02 14:35:59 -04:00
5af2474d51
usdrx1: axi_ad9671 / axi_jesd_gt added signal for frame synchronization
2014-09-23 22:44:33 -04:00
41cc92ef49
Remove BASEADDR/HIGHADDR parameters
...
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
b481df0b5f
library: local constraints async groups
2014-08-14 15:09:51 -04:00
01963b01fc
jesd_gt: local constraints
2014-08-14 15:09:49 -04:00
cf56a568c6
kcu105: GTH updates
2014-06-05 14:27:38 -04:00
916afd460f
axi_jesd_gt: synchronization support
2014-05-19 14:17:31 -04:00
80e5051894
axi_jesd_gt: initial checkin
2014-04-01 15:14:28 -04:00
Adrian Costina
Rejeesh Kutty
Istvan Csomortani
Lars-Peter Clausen