95249d2165
fmcjesdadc1: Update IP instantiations
2017-04-21 15:08:16 +03:00
1c23cf4621
all: Update verilog files to verilog-2001
2017-04-13 11:59:55 +03:00
968d94603e
fmcjesdadc1: Update xcvr configuration to the default one used for this board
2017-03-23 11:31:00 +02:00
f1168f9e29
fmcjesdadc1/a5gt- use xilinx setup 2-dma
2016-12-22 14:14:21 -05:00
8d799d0316
fmcjesdadc1: Intergrate ad_sysref_gen into project
2016-12-19 13:37:29 +00:00
45fd4f806d
fmcjesdadc1: Fixed RX_PMA_CFG parameter
2016-11-25 16:33:58 +02:00
daa3df4b96
projects/- xcvr updates
2016-11-22 16:23:05 -05:00
e62fe0c086
fmcjesdadc1- a5gt/a5soc- sysclk is different
2016-11-11 10:34:18 -05:00
a54092c9bb
fmcjesdadc1: Update projects to xcvr framework
...
This commit contains modifications for Xilinx only
2016-11-10 10:59:52 +02:00
0b58a2a1db
avl_adxcvr- sysclk frequency
2016-11-09 09:21:07 -05:00
aef3e87d7e
fmcjesdadc1/a5soc -- xcvr frame work updates
2016-11-08 15:20:48 -05:00
8ea9beffaf
fmcjesdadc1- a5soc tcl updates
2016-11-04 15:01:19 -04:00
b8c34791d5
version_upgrade: fmcjesdadc1 updated to 2016.2
...
Xilinx IP core JESD204 is updated to version 7.0
2016-09-06 11:41:37 +03:00
59c726ecbe
fmcjesdadc1: Updated common design to 2015.4
2016-03-16 10:14:06 +02:00
89f7aadfb1
fmcjesdadc1: A5GT, connected xcvr_rxt_cntrl reset input to the axi_jesd_xcvr reset output
...
This will allow for the transceivers to be reset by the axi_jesd_xcvr core
2016-02-23 11:31:07 +02:00
0f37dd6424
fmcjesdadc1: Fixed project
...
- changed system_project.tcl so that all base designs to be included
- changed DMA properties to take into consideration the new parameter names
- changed reset bridges to asynchronous
- increased maximum burst size of the DMA bridge
- changed the data_width of the memory bus to 256, as with 512 timing violations may occur
- changed base addresses for the base system to be the same as in the previous release
2016-02-19 14:09:57 +02:00
9281eb2c33
fmcjesdadc1: Updated common altera design
2015-11-24 15:38:58 +02:00
2ed161628d
fmcjesdadc1: Updated project to 2015.2.1
...
- updated to the new jesd framework
- added cpack core
2015-09-24 19:12:40 +03:00
7e2255f4d9
fmcjesdadc1: Drop explicit axi_dmac clock synchronicity configuration
...
The axi_dmac core is now capable of detecting whether its different parts
run in different clock domains or not. No need to configure it manually any
more.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-09-18 15:28:05 +02:00
d52308f074
axi_dmac: Change parameter name 2D_TRANSFER
...
Parameter name can't start with numbers, 2D_TRANSFER was changed to DMA_2D_TRANSFER
2015-08-20 10:14:22 +03:00
57cfb7cfb1
hdl/library: Update the IP parameters
...
The following IP parameters were renamed:
PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
36f71ea59b
fmcjesdadc1: common altera, fixed dmac configuration and connection. Connected reset for cpack
2015-07-28 12:33:24 +03:00
289e73660b
removed- xcvr is now part of qsys
2015-07-23 15:26:51 -04:00
d8e2196c75
fmcjesdadc1- board qsys
2015-07-22 15:44:04 -04:00
d66387f482
fmcjesdadc1- board qsys
2015-07-22 15:23:39 -04:00
4e99a2cb01
xcvr: remove signal tap
2015-07-16 08:09:56 -04:00
2d8fa2024b
fmcjesdadc1/a5gt: split xcvr cores
2015-07-15 09:44:52 -04:00
6862655b0d
Add .gitattributes file
...
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
71b5004b25
projects- drp moved to up-clock domain
2015-06-01 14:57:59 -04:00
e332fa01c8
ad6676evb, daq2, fmcadc2, fmcjesdadc1, usdrx1: Updated jesd reset connection
2015-04-30 12:11:46 +03:00
c7e4ba5083
fmcjesdadc1: Updated KC705 to the latest flow
2015-03-30 18:07:47 +03:00
ccf0542218
fmcjesdadc1: Connected constant 0 to unconnected inputs
2015-03-26 12:08:14 +02:00
d418c9f9b1
fmcjesdadc1: Updated project to new flow. Updated ZC706 design
2015-03-24 10:38:14 +02:00
138e789fb6
projects/fmcjesdadc1/common/fmcjesdadc1_bd.tcl: Fix interrupts
...
sys_concat_intc: don't reset NUM_PORTS to 6
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-09 17:38:16 +01:00
b0f571ce0c
fmcjesdadc1: Fix parameter lane number for GT core
2014-11-21 19:17:29 +02:00
57137df018
fmcjesdadc1_zc706: Interrupt update
2014-11-03 13:02:09 +02:00
17675863e0
all_projects: Fix the interrupt connections to preserve IRQ layout
2014-10-22 11:48:08 +03:00
02802644bf
fmcjesdadc1: Fix a few warning and issue with ILA
...
+ GPIO width is 15
+ Fix ILA core
2014-10-15 15:37:05 +03:00
6f77af4aff
fmcjesdadc1: Upgrade project to 2014.2
2014-10-09 18:55:27 +03:00
2ce7695bf7
fmcjesdadc1: Initial commit of VC707 version
2014-09-01 18:47:01 +03:00
9a80fec4e4
fmcjesdadc1: Delete trailing whitespaces
2014-09-01 18:45:20 +03:00
5f21f54463
fmcjesdadc1: zc706 version
2014-08-25 14:28:57 -04:00
76ffb939e5
zc706: ad9625 copy
2014-08-22 11:24:24 -04:00
96969079ce
a5soc: fixes for 14.0 and spi conflicts
2014-08-11 16:46:37 -04:00
60dd14bcdb
a5soc: removed jtag master control
2014-07-01 12:27:37 -04:00
0d678b89ed
altera a5gt fmcjesdadc1 setup
2014-04-01 11:46:37 -04:00
Istvan Csomortani
Adrian Costina
Rejeesh Kutty
AndreiGrozav
Lars-Peter Clausen
Michael Hennerich