Adrian Costina
4e62fb0ef3
m2k: Add reset circuitry on the logic_analyzer clock domain
2017-02-13 12:02:11 +02:00
Istvan Csomortani
5fa6dba333
Make: Update Makefiles
2017-02-10 16:32:58 +02:00
Istvan Csomortani
f5f1f47691
ad9467_fmc: Delete asynchronous clock group definition
...
This is a very bad way to handle timing. All the false path
should be defined explicitly, rather than define asynchronous clock
domains.
2017-02-10 16:21:35 +02:00
Rejeesh Kutty
c39ed08edd
zcu102/*- actual clock == desired clock
2017-02-06 12:53:47 -05:00
Rejeesh Kutty
58872aa3ef
fmcomms2/zc706pr- prcfg is a single clock synchronous design
2017-02-06 10:59:18 -05:00
AndreiGrozav
971bcbb0fc
fmcomms1: Remove project
2017-02-03 16:42:44 +02:00
Rejeesh Kutty
096274a033
daq2/zcu102- fix refclock pin swap
2017-02-03 09:26:07 -05:00
Rejeesh Kutty
7c363cd5a7
daq3/a10gx/system_constr.sdc- fix typo
2017-02-03 09:26:07 -05:00
Rejeesh Kutty
35f660fe06
fmcjesdadc1/vc707- constraint clean-up
2017-02-02 15:05:49 -05:00
Rejeesh Kutty
d46352928a
fmcomms5- fix ovf net connections
2017-02-02 14:24:06 -05:00
Adrian Costina
6aadb49e80
m2k: Remove use board flow from the standalone version
2017-02-02 12:58:58 +02:00
Adrian Costina
0d0c3e99fd
m2k: Added I2C pull-ul, removed SLEW constraints
2017-02-02 12:35:46 +02:00
Rejeesh Kutty
85ff496c12
daq2/a10gx- gpio match with others
2017-02-01 20:54:56 -05:00
Adrian Costina
5155b3f46d
m2k: Fix gpio buswidth
2017-02-01 17:43:01 +02:00
Adrian Costina
cfff70d358
M2K: Update standalone project
...
- configured PS7 similar to pluto. Added specific constraints instead of default PS7
- moved ad9963_resetn and en_power_analog to gpio[0] and gpio[1]
2017-02-01 14:27:11 +02:00
Adrian Costina
6bdd853b88
m2k: Updated PS7 configuration
2017-01-31 23:08:53 +02:00
Adrian Costina
b14d740f87
M2K: initial commit
2017-01-31 16:43:40 +02:00
Istvan Csomortani
d5af828b9c
Merge branch 'dev' into hdl_2016_r2
2017-01-30 17:10:05 +02:00
Rejeesh Kutty
97d72d2f65
a10gx- xilinx/altera sync-up
2017-01-30 10:01:28 -05:00
Rejeesh Kutty
b14e7fe4ee
daq3/kcu105- 1.25GSPS
2017-01-30 10:01:28 -05:00
rejeesh kutty
48ad24cdbe
enable partial reconfiguration mode
2017-01-27 09:26:53 -05:00
Rejeesh Kutty
be1328c55b
kcu105- added missing ethernet configurations
2017-01-23 10:14:09 -05:00
Rejeesh Kutty
661413627f
daq3- round about way to avoid ip getting locked
2017-01-20 15:55:33 -05:00
Istvan Csomortani
62792ddaed
adrv9371x: Change the axi_adxcvr cores addresses
...
Because the S_AXI interface of the axi_adxcvr core was infered
using the process adi_ip_properties, the interface address range
has changed from 4k to 64k. As a result, all the addresses of
the axi_adxcvr cores were changed and realigned.
2017-01-19 15:23:03 +02:00
Adrian Costina
ecd152c90d
pzsdr1: ccbrk_cmos, fix clkdiv parameters
2017-01-18 12:04:04 +02:00
Adrian Costina
165ba76d9d
pzsdr1: Added FIFOs for DAC and ADC paths so that they work at l_clk or l_clk/2
2017-01-18 12:01:24 +02:00
Adrian Costina
319a883c00
pzsdr2: Added FIFOs for DAC and ADC paths so that they work at l_clk/2 or l_clk/4
2017-01-18 12:00:10 +02:00
Adrian Costina
9344dd34dc
zcu102: Update project to include clkdiv
2017-01-16 14:47:31 +02:00
Adrian Costina
4dcad7e116
fmcomms2: zcu102, update clkdiv device parameter
2017-01-16 14:38:37 +02:00
Nick Pillitteri
b622b6592e
FMCOMMS5/ZCU102 : Merge from njpillitteri/hdl:dev
...
Pull request Dev #26
2017-01-13 14:47:16 +02:00
Adrian Costina
d2e7b6b635
fmcomms5: Added FIFOs for DAC and ADC paths so that they work at l_clk/2 or l_clk/4
2017-01-13 14:18:59 +02:00
Adrian Costina
a36057679a
fmcomms2: Update Makefiles
2017-01-13 14:16:21 +02:00
Adrian Costina
15c5bc7012
fmcomms2: zcu102, changed clkdiv C_SIM_DEVICE parameter to ultrascale
2017-01-13 13:57:32 +02:00
Adrian Costina
b84325d43f
fmcomms2: take into consideration both adc_r1 and dac_r1 for clock division selection
2017-01-13 13:56:04 +02:00
Istvan Csomortani
f003b5b35a
fmcjesdadc1: Reduce SYSREF period
2017-01-12 16:10:45 +02:00
Adrian Costina
e77428c50e
fmcomms2: Added FIFOs for DAC and ADC paths so that the path works at l_clk / 2 or l_clk /4
...
- removed ILA
2017-01-11 18:12:35 +02:00
Rejeesh Kutty
37d54bb984
fmcjesdadc1/a5gt- max delay fit only
2017-01-04 16:04:19 -05:00
Rejeesh Kutty
8b74e911b8
fmcjesdadc1/a5gt- qr to ddio max delay
2017-01-04 14:10:44 -05:00
Istvan Csomortani
e4e5b30ade
fmcadc5: Integrate ad_sysref_gen into the project
2017-01-03 13:52:39 +02:00
Rejeesh Kutty
14ded4f123
fmcjeadadc1/a5soc- ad_sysref_gen updates
2016-12-22 15:59:45 -05:00
Rejeesh Kutty
b089173b4c
fmcjesdadc1/a5soc- cpu clock is 50m for a5gt also
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
aa6c94c993
usdrx1/a5gt: ddr3 use ip constraints
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
18660c7ab4
fmcjesdadc1/a5gt: ddr3 use ip constraints
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
2bea337aa2
fmcjesdadc1/a5gt- use 50m-mem-cpu-clk
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
5d683943ab
fmcjesdadc1/a5gt- remove ad-sysref-gen-pack
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
f1168f9e29
fmcjesdadc1/a5gt- use xilinx setup 2-dma
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
1ceec2e2a9
projects/a5gt- use 50m afi clock for cpu- xcvr reconfig timing
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
eba30b0cde
projects/altera- qii_auto_pack option
2016-12-22 14:14:21 -05:00
Rejeesh Kutty
4a783d523d
projects/altera* - default & common qsys commands
2016-12-20 16:27:44 -05:00
Rejeesh Kutty
3e57ff1fc5
z-mpsoc- map 0x4-0x8,0x7-0x9
2016-12-20 16:14:38 -05:00