Commit Graph

188 Commits (537a284115eeb30b2d0031c6e7d453ab5496d39b)

Author SHA1 Message Date
Iacob_Liviu 8343c03f5c adrv9371x: remove IOB attribute from rx and rx_os 2021-07-26 12:42:21 +01:00
Sergiu Arpadi 6f2f2b8626 makefile: Regenerate make files 2021-01-20 01:02:56 +02:00
sergiu arpadi acbbd4636a sysid: Upgrade framework, header/ip are now at 2/1.1.a
Unify tcl scripts; rename adi_pd_intel.tcl to adi_pd.tcl
add git branch to internal use area; update log prints;
update xilixn projects; fix cn0506 sysid script;
2021-01-20 01:02:56 +02:00
Istvan Csomortani 85f5dc8230 ad9371x/intel: Fix fPLL configuration
When phase alignment is active, the PFD frequency value should be used
as outclk1 actual frequency.

The configuration interface of the fPLL does not support fractional values.
If the reference clock is fractional, the tool will throw an error that requirement
above is not respected.

Round up the reference clock for the SERDES and the lane rate in order to
overcome this issue, until it's not fixed by Intel.
2021-01-12 19:34:44 +02:00
Adrian Costina 9093a8c428 library: Move ad_iobuf to the common library, as it's not Xilinx specific
Updated all system_project and Makefiles
2020-11-02 16:13:35 +02:00
Istvan Csomortani 37254358dd makefile: Regenerate make files 2020-10-20 12:51:10 +03:00
Sergiu Arpadi d8ab27b2af sysid: Remove cstring init string 2020-09-30 19:12:24 +03:00
Sergiu Arpadi 3241924d14 sysid_intel: Added sysid to intel projects 2020-09-11 15:46:06 +03:00
Istvan Csomortani 8818089015 a10soc: Reconfiguration interface address width improvement
The reconfiguration interface's address width is different in various
architectures. Define the required address width in system_qsys.tcl.
2020-09-09 14:15:37 +03:00
Istvan Csomortani fb7da01498 adrv9371x/a10gx: Set optimization mode to aggressive performance 2020-08-17 10:43:03 +03:00
Istvan Csomortani 02ada3bbf7 a10gx: Delete input/output delay definitions
All input and output delays should be referenced to a virtual clock.

If the input and output delays reference base clocks or PLL clocks rather than
virtual clocks, the intra- and inter-clock transfer clock uncertainties,
determined by derive_clock_uncertainty, are incorrectly applied to the I/O ports.
See mnl_timequest_cookbook.pdf for more info.
2020-08-11 10:14:18 +03:00
Istvan Csomortani a39fa831d0 ad9371:a10gx: Relax interconnect requirements 2020-08-11 10:14:18 +03:00
Istvan Csomortani 7e22f91429 adrv9371:a10gx: Remove constraint from DDR 2020-08-11 10:14:18 +03:00
Istvan Csomortani 47a97aac7c adrv9371x/intel: Update project to use generic JESD204B TPL 2020-05-25 11:55:40 +03:00
Istvan Csomortani 32eeedb660 makefile: Update makefiles 2020-05-07 08:41:49 +01:00
Laszlo Nagy e22016de4c adrv9371/daq2/daq3:kcu105: patch GTH3 CPLL parameters
Update GTH3 parameters according to a 10Gbps link from the Transceiver
Wizard.
2019-10-08 10:38:46 +03:00
Istvan Csomortani aa5fdf903e Makefile: Update makefiles 2019-08-26 16:58:01 +03:00
AndreiGrozav 44deaadb4a adrv9371: Add decimation and interpolation filters 2019-08-20 16:24:47 +03:00
AndreiGrozav 36a1767329 Add generic fir filters processes for RF projects 2019-08-20 16:24:47 +03:00
Arpadi 0680e44330 system_id: deployed ip 2019-08-06 16:53:11 +03:00
Istvan Csomortani 04ce10a570 cosmetics: Change Altera to Intel in comments 2019-06-29 06:53:51 +03:00
Istvan Csomortani 6e6f1347d7 project/scripts: Rename adi_project_alt.tcl to adi_project_intel.tcl 2019-06-29 06:53:51 +03:00
Istvan Csomortani a589753d92 project/scripts: Rename adi_project.tcl to adi_project_xilinx.tcl 2019-06-29 06:53:51 +03:00
Istvan Csomortani 43725429ac adi_project: Rename the process adi_project_xilinx to adi_project 2019-06-29 06:53:51 +03:00
Istvan Csomortani ec67a381e4 adi_project: Rename the process adi_project_altera to adi_project 2019-06-29 06:53:51 +03:00
Istvan Csomortani 79b6ba29ce all: Rename altera to intel 2019-06-29 06:53:51 +03:00
Istvan Csomortani 019390f9bf block_design: Updates with new reset net variables 2019-06-11 18:13:06 +03:00
Istvan Csomortani 9072779e41 adrv9371x: Clean out system_db.tcl 2019-06-11 18:13:06 +03:00
Istvan Csomortani 7960b00684 block_design: Update with new clock net variables
Using the new clock net variables in all Xilinx block designs.
2019-06-11 18:13:06 +03:00
Istvan Csomortani 70b7d69ff8 whitespace: Delete all trailing white spaces 2019-06-07 10:20:15 +03:00
Istvan Csomortani f113f8f32f ad9371x/common: Fix ad_xcvrcon proc call
The process ad_xcvrcon has a device_clk attribute which can be used to
connect a custom device clock to the XCVR. Fix the proc call so we can
simplify the block design script.
2019-05-29 10:27:16 +03:00
Laszlo Nagy 7afc9e77a2 adrv9371:qsys: use bundled AXIS interface 2019-05-16 13:27:19 +03:00
Laszlo Nagy 7f16f823ff Revert "axi_dmac: add tlast to the axis interface for Intel"
This reverts commit e2c75c015f.
2019-05-16 13:27:19 +03:00
AndreiGrozav d894c30c2d Remove deprecated/unused parameters
adrv9009
adrv9371x
arradio
daq2
daq3
fmcomms2
fmcomms5
2019-03-30 11:26:11 +02:00
Laszlo Nagy b98eb28dca adrv9371: update adcfifo/dacfifo 2019-01-23 14:45:45 +02:00
Laszlo Nagy e864786d3a adrv9371: use generic TPL
Use the generic TPLs for a better scalability to ease lane number
reductions.
2019-01-14 17:21:00 +02:00
Lars-Peter Clausen aed8478d10 adrv9371x: Use new pack/unpack infrastructure
Use the new util_cpack2 and util_upack2 cores. They have lower utilization
that the old util_cpack and util_upack cores.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-11-28 11:33:11 +02:00
Istvan Csomortani 10deddd6d2 adrv9371/zcu102: Tune the differential swing of the TX lines 2018-10-04 14:37:02 +03:00
Laszlo Nagy 4ce153e6e1 all/system_top.v: loopback gpio lines
Create loopback on unused GPIO lines since Linux may rely on it.
2018-10-04 14:19:37 +03:00
Istvan Csomortani 15863795e8 adrv9371x:kcu105: Performance_Retiming results the highest WNS
In default strategy we having a few path with small negative slack inside of
the MIG, due to the high UI clock (300MHz).

This new strategy solves this issue.
2018-08-23 18:41:48 +03:00
Istvan Csomortani 2293374307 adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs
The affected projects are:
  - FMCADC2/VC707 - 16Mb
  - FMCADC5/VC707 - 16Mb
  - DAQ2/ZC706  - ADC@1GB and DAC@8Mb
  - DAQ2/KC705  - ADC@4Mb and DAC@4Mb
  - DAQ2/VC707  - ADC@8Mb and DAC@8Mb
  - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb
  - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb
  - DAQ3/ZC706  - ADC@1GB and DAC@8Mb
  - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb
  - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb
  - ADRV9371x/KCU105 - DAC@8Mb
  - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-21 11:44:05 +03:00
Laszlo Nagy 31318cf311 all/system_top.v: drive unused gpio inputs with zero
The loopback on the unused gpio inputs consumes routing resources
while does not gives any value for the software.

Connect these lines to zero instead.
2018-08-10 17:00:11 +03:00
Laszlo Nagy 05789e8978 adrv9009/adrv9371x/fmcomms2:Drop usage of ad_iobuf on non-bidirectional IOs
Some projects use the ad_iobuf on IOs that are not bidirectional
producing synthesis warnings.

The change fixes warnings like:
[Synth 8-6104] Input port 'gpio_bd_i' has an internal driver
[Synth 8-6104] Input port 'gpio_status' has an internal driver
2018-08-10 17:00:11 +03:00
Laszlo Nagy fa7c85a9eb all: Drive undriven input signals, complete interface
- connect unused GPIO inputs to loopback
- connect unconnected inputs to zero
- complete interface for system_wrapper instantiated in all system_top

fixes incomplet portlist WARNING [Synth 8-350]
fixes undriven inputs WARNING [Synth 8-3295]

The change excludes the generated system.v and Xilinx files.
2018-08-10 17:00:11 +03:00
AndreiGrozav ebae8bf8c1 Remove interrupts from system_top for all xilinx projects
- remove interrupts from system_top
- for all suported carriers:
	- remove all interrupt bd pins
	- connect to GND all initial unconnected interrupt pins
- update ad_cpu_interrupt procedure to disconnect a interrupt from GND
before connectiong it to another pin.
2018-08-10 10:10:58 +03:00
Laszlo Nagy e2c75c015f axi_dmac: add tlast to the axis interface for Intel
This change adds the TLAST signal to the AXI streaming interface
of the source side for Intel targets.
Xilinx based designs already have this since the tlast is part of the
interface definition.

In order to make the signal optional and let the tool connect a
default value to the it, the USE_TLAST_SRC/DEST parameter is
added to the configuration UI. This conditions the tlast port on
the interface of the DMAC.

Xilinx handles the optional signals much better so the parameter
is not required there.
2018-07-06 16:30:30 +03:00
Adrian Costina bbb5a31994 Reviewed pinout of ZCU102 projects. fmcomms5 pin gpio_ad5355_lock location changed 2018-04-21 15:28:13 +03:00
Lars-Peter Clausen 2b914d33c1 Move Altera IP core dependency tracking to library Makefiles
Currently the individual IP core dependencies are tracked inside the
library Makefile for Xilinx IPs and the project Makefiles only reference
the IP cores.

For Altera on the other hand the individual dependencies are tracked inside
the project Makefile. This leads to a lot of duplicated lists and also
means that the project Makefiles need to be regenerated when one of the IP
cores changes their files.

Change the Altera projects to a similar scheme than the Xilinx projects.
The projects themselves only reference the library as a whole as their
dependency while the library Makefile references the individual source
dependencies.

Since on Altera there is no target that has to be generated create a dummy
target called ".timestamp_altera" who's only purpose is to have a timestamp
that is greater or equal to the timestamp of all of the IP core files. This
means the project Makefile can have a dependency on this file and make sure
that the project will be rebuild if any of the files in the library
changes.

This patch contains quite a bit of churn, but hopefully it reduces the
amount of churn in the future when modifying Altera IP cores.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-11 15:09:54 +03:00
Lars-Peter Clausen b20714bae2 Regenerate project top-level Makefiles
Removes a lot of boilerplate code.

Using the new scheme it is possible to add new projects or sub-projects
without having to re-generate any existing Makefiles.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-11 15:09:54 +03:00
Lars-Peter Clausen 377247a434 Regenerate project Makefiles using the new shared Makefile includes
This reduces the amount of boilerplate code that is present in these
Makefiles by a lot.

It also makes it possible to update the Makefile rules in future without
having to re-generate all the Makefiles.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-11 15:09:54 +03:00