Rejeesh Kutty
8dfcbdfd48
gt_channel/gt_common: simulation parameter warning fix
2015-03-06 12:36:07 -05:00
Rejeesh Kutty
57e1f0e334
gt_channel/gt_common: simulation parameter warning fix
2015-03-06 12:36:03 -05:00
Rejeesh Kutty
2d01955042
up_gt: change version dfe/lpm support
2015-03-05 09:47:16 -05:00
Istvan Csomortani
1613f7fb41
cftl_cip: Add util_pmod_fmeter IP to library
...
Frequency meter IP for CN0332.
2015-02-23 17:20:12 +02:00
Rejeesh Kutty
2442b6e929
gt- report device type
2015-02-17 11:43:50 -05:00
Rejeesh Kutty
de043ce130
gt_channel: lpm/dfe programmable
2015-02-13 11:33:04 -05:00
Rejeesh Kutty
870ebdb562
up_gt: support lpm mode
2015-02-12 16:21:11 -05:00
Rejeesh Kutty
1e7c9a3924
gt_es: support lpm mode - 2/2
2015-02-12 16:20:43 -05:00
Rejeesh Kutty
0a8e6f62ef
gt_es: support lpm mode - 1/2
2015-02-12 15:15:18 -05:00
Rejeesh Kutty
9e2e2ef44e
xfer-logic: stretch toggles to allow capture
2015-02-06 22:15:16 -05:00
Rejeesh Kutty
e9231c8f36
xfer-logic: stretch toggles to allow capture
2015-02-06 22:15:14 -05:00
Istvan Csomortani
9f485f2f4e
common: Add register map module for HDMI receiver.
2015-01-08 12:24:47 +02:00
Istvan Csomortani
161e6cc70d
common: Add color space sampling and color space conversion modules
...
This two module are used by the HDMI receiver.
2015-01-08 12:24:46 +02:00
Rejeesh Kutty
3a4d765a2b
up_clkgen: reading typo
2015-01-07 14:02:39 -05:00
Rejeesh Kutty
1d6ea64d04
up_gt: move status to up clock
2014-12-16 08:48:13 -05:00
Rejeesh Kutty
04c10abc2f
gth/gtx: share same cpll/qpll cpu settings
2014-12-11 11:18:48 -05:00
Lars-Peter Clausen
8cc9adfc49
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:22:28 +01:00
Rejeesh Kutty
a4724f8396
es: added kcu105 gth
2014-11-17 09:55:12 -05:00
Rejeesh Kutty
b1c91fac92
es: added kcu105 gth
2014-11-17 09:55:10 -05:00
Istvan Csomortani
c6df568a00
Revert "ad_interrupts: Initial check in."
...
This reverts commit b254380338
.
2014-11-06 12:16:52 +02:00
Rejeesh Kutty
74ec396b27
ad_rst: ultrascale -dual stage
2014-11-05 16:47:41 -05:00
Rejeesh Kutty
17cb1d9585
common/mem: asymmetric version
2014-10-30 11:12:09 -04:00
Istvan Csomortani
b254380338
ad_interrupts: Initial check in.
...
Initial check in of the interrupt concatenation block.
2014-10-27 19:34:34 +02:00
Rejeesh Kutty
7e52cf9568
up_axi: timeout generating multiple/repeated acks
2014-10-23 13:51:33 -04:00
Adrian Costina
1d26639d73
common: Added synchronization mechanism to the up_adc_common module
2014-10-22 10:05:55 +03:00
Rejeesh Kutty
2817ccdb22
up_axi: altera can not handle same clock assertion of arready and rvalid
2014-10-09 15:25:05 -04:00
Adrian Costina
2dfcb0c599
usdrx1: Initial commit for a5gt
...
axi_ad9671: added start of frame information to the altera core.
2014-10-07 19:41:54 +03:00
Istvan Csomortani
bfa17844ff
ad_serdes_in: General update
...
Added a parameter for option SDR / DDR mode, added a parameter for parallel data width.
Note: default IF_TYPE is SDR and default PARALLEL_WIDTH is 8
2014-10-07 17:42:27 +03:00
Rejeesh Kutty
de33722470
up/constr: independent read/write and local constraints
2014-10-02 14:35:59 -04:00
Istvan Csomortani
079ed0ffb3
ad_serdes_in: Update the serdes_in module
...
Add additional IDELAY block before the ISERDES. Delet the IDDR blocks. Be aware, the ISERDES block are running in DDR mode. If the interface is SDR the maximum parallel data width is 4.
2014-09-25 16:40:29 +03:00
Istvan Csomortani
27ffff827a
common: Initial check in of ad_serdes_in.v
...
A generic serdes module for input interface, support both 6 and 7 series.
2014-09-24 18:34:40 +03:00
acostina
5af2474d51
usdrx1: axi_ad9671 / axi_jesd_gt added signal for frame synchronization
2014-09-23 22:44:33 -04:00
Lars-Peter Clausen
b877cea2ed
up_axi: Add parameter to configure the internal address width
...
Not all peripherals need 14 bit of address space.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:40 +02:00
Lars-Peter Clausen
41cc92ef49
Remove BASEADDR/HIGHADDR parameters
...
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Lars-Peter Clausen
6ad589475a
up_axi: Prevent read and write requests from racing against each other
...
Make sure that if a read and a write request arrive on the very same clock
cycle to only accept one of them. The simple solution chosen here is to only
accept the write request when this happens and delay the acceptance of the
read request until the write request is finished.
This solution is not fair since a write request will always take precedence,
which in theory allows the write bus to starve the read bus. But in practice
we should never see that many write requests that we are unable to answer
the read request.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-10 13:04:05 +02:00
Lars-Peter Clausen
18a506b3ca
up_axi: Wait for the transaction to fully finish before releasing up_axi_access
...
Wait for the master to accept the response for the current transaction
before we allow a new transaction to start.
This fixes problems in case the master is not ready to accept the response
when we make it available.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-10 13:03:52 +02:00
Lars-Peter Clausen
50faf0c53a
Remove executable flags from non-exectuable files
2014-09-09 15:05:06 +02:00
Adrian Costina
a773cc4992
usdrx1: updated project
...
ad_jesd_align wasa updated to be able to work with frames that have more than 4 octets per frame
2014-09-01 15:18:39 +03:00
Istvan Csomortani
2b15c7313e
ad_dcfilter: Fix filter loopback
2014-08-12 14:42:10 +03:00
Rejeesh Kutty
701dc96016
up_dac_channel: make iq cor coeff(s) tc
2014-07-24 10:10:24 -04:00
Istvan Csomortani
db1c931736
ad9625_plddr: PL DDR3 fixes
...
- Modified the axi slave interface handler
- Increased the rfifo_mem input depth to prevent overflow
2014-07-23 19:34:44 +03:00
Rejeesh Kutty
2955b9db78
fifo2s: flush if no request, c5soc: 14.0
2014-07-15 16:25:33 -04:00
Rejeesh Kutty
e7d5d79e42
daq2/kcu105: gth up and running - as it is commit
2014-07-10 10:56:37 -04:00
Rejeesh Kutty
a9992f02b0
fifo2s: bug fixes- on 64mhz dma clock
2014-07-08 16:57:44 -04:00
Rejeesh Kutty
a388ccab0a
fmcomms2/c5soc: initial checkin
2014-07-02 14:56:00 -04:00
Rejeesh Kutty
60dd14bcdb
a5soc: removed jtag master control
2014-07-01 12:27:37 -04:00
Rejeesh Kutty
b6052773b7
added adc/dac gpio registers
2014-06-27 14:45:58 -04:00
Rejeesh Kutty
6b3312bbf9
library: register map changes and for mathworks
2014-06-24 14:24:22 -04:00
Rejeesh Kutty
d4be46cc17
library: register map changes and for mathworks
2014-06-24 14:23:56 -04:00
Rejeesh Kutty
cf56a568c6
kcu105: GTH updates
2014-06-05 14:27:38 -04:00