Commit Graph

215 Commits (577441bd0c92f798d8e359f24e08ad7ea2181d5d)

Author SHA1 Message Date
Rejeesh Kutty 577441bd0c daq1: clean up dma interfaces 2014-09-23 14:23:41 -04:00
Rejeesh Kutty 7c98a783c5 2014.2 updates 2014-09-23 12:32:33 -04:00
Rejeesh Kutty 1682d9da10 fmcadc3: initial updates 2014-09-22 11:27:17 -04:00
Rejeesh Kutty 5e3076d770 fmcadc3: daq2 copy 2014-09-22 11:27:16 -04:00
Istvan Csomortani dd7bac41c1 daq1 : Update project to 2014.2
- Cores are upadted
  - Concat module does not swap output anymore
  - Clock signal name ps7_clk_* changed to clk_fpga_*
2014-09-22 17:33:50 +03:00
Istvan Csomortani f2cd7626f5 adi_project : ZC706 board name changed on 2014.2 2014-09-22 17:33:49 +03:00
Rejeesh Kutty fb5d212370 daq2/kcu105: fixed timing violations 2014-09-19 15:55:42 -04:00
Istvan Csomortani 751bdd6cfc daq1: Update the constraint file
- tx_ref_clk and rx_sysref need to be differential
  - cosmetic changes
2014-09-19 18:22:57 +03:00
Adrian Costina f43b5d707e fmcomms2: Reduced clock frequency for ILA to meet timing for ZED
Modified ZED constraints to 250 MHz for the clock from AD9361
2014-09-16 16:08:28 -04:00
Adrian Costina d33fb07587 usdrx1: Modified the GPIO assignments so that board specific GPIOs start from GPIO 32.
GPIOs for which the directions is known, have been specifically assigned.

The SPI clock has been changed to a lower frequency.
2014-09-16 15:56:19 -04:00
Adrian Costina d4db53c3b0 usdrx1_spi: Modified module to be compatible with altera 2014-09-16 15:53:11 -04:00
Michael Hennerich a3dbd5ac00 projects/common/vc707/vc707_system_bd: AD9625_FMC update to 2014.2
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-09-16 14:59:36 +02:00
Istvan Csomortani a91f4bb6b9 daq1: General updates
- Add additional GT setups
- Use channel PLL instead of quad PLL
- Add additional ILA probes for debug
2014-09-13 00:23:11 +03:00
Lars-Peter Clausen d8651cdd2e fmcomms2: c5soc: Set dac_util_unpack number of channels to 4
We only do have 4 channels in this design. Reducing the number of supported
channels for the dac_util_unpack core to 4 from 8 lowers the DMA alignment
requirement from 128bit to 64bit.  We need this since applications only
expect a DMA alignment requirement of 64bit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-12 16:15:12 +02:00
Lars-Peter Clausen ecc498313c fmcomms2: c5soc: Connect ADC, DAC and VGA DMA to different bridge interconnects
We have enough bridge interconnect to give each DMA its own, so use them.
This makes sure that they do not interfere with each others transfers to
much. The SDRAM controller side of the FPGA2SDRAM bridges FIFO runs at a
much faster frequency then what we are able to use in the fabric. So its
better to do the arbitration on that side of the bus to make sure that we
can utilize the buses in the FPGA fabric to the maximum for each DMA core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-12 16:14:07 +02:00
Adrian Costina 61f21a17b3 fmcomms2:c5soc project upgraded with util_dac_unpack 2014-09-11 15:13:09 -04:00
Lars-Peter Clausen 4c1c50788e fmcomms5: c5soc: Fix typo
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 17:15:10 +02:00
Lars-Peter Clausen 41cc92ef49 Remove BASEADDR/HIGHADDR parameters
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Michael Hennerich 647a26e19c projects/common/vc707/vc707_system_bd.tcl: Select Linux MMU settings 2014-09-10 17:40:36 +02:00
Lars-Peter Clausen c7989925c5 fmcomms2: c5soc: Add false path between 50MHz and VGA PLL clock
Otherwise we get timing errors for the reset signal that is generated in the
50MHz clock domain, but used in the VGA PLL clock domain.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-09 15:05:06 +02:00
Lars-Peter Clausen 328205c31d fmcomms2: c5soc: Set DMA transfer length to 24 bits
14 bits is a bit to low and we use 24 bits everywhere else as well.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-09 15:05:06 +02:00
Lars-Peter Clausen 50faf0c53a Remove executable flags from non-exectuable files 2014-09-09 15:05:06 +02:00
Rejeesh Kutty b58e425b44 daq2/kcu105: timing improvement -register slices hang 2014-09-08 10:24:56 -04:00
acozma 6e389b8c47 motor_control: Updated the FOC IP and the encoder connections to the IP 2014-09-06 15:58:03 +03:00
Rejeesh Kutty 669462e0f6 ad9625x2: updates on pcores 2014-09-05 12:25:43 -04:00
Rejeesh Kutty 72f31370ef a5gt: ethernet-fpga lvds mode 2014-09-04 11:19:25 -04:00
Rejeesh Kutty 3deb55bb98 a5gt: ethernet i/o changed to lvds 2014-09-04 11:19:24 -04:00
Adrian Costina dfb94f7b68 motor_control: Modified foc_controller to be compatible with other cores 2014-09-03 12:09:37 +03:00
Istvan Csomortani 9f3461b130 fmcjesdadc1: Added support for KC705 2014-09-02 18:02:25 +03:00
Istvan Csomortani 17122661d2 fmcomms2_pr: Fix file path on ZC706/system_bd.tcl 2014-09-01 18:49:55 +03:00
Istvan Csomortani 2ce7695bf7 fmcjesdadc1: Initial commit of VC707 version 2014-09-01 18:47:01 +03:00
Istvan Csomortani 9a80fec4e4 fmcjesdadc1: Delete trailing whitespaces 2014-09-01 18:45:20 +03:00
acozma d08d0cd70b motor_control: added the MW FOC IP and updated the design 2014-09-01 18:35:21 +03:00
Istvan Csomortani ee752ec08a daq1: Initial commit 2014-09-01 18:34:31 +03:00
Adrian Costina a773cc4992 usdrx1: updated project
ad_jesd_align wasa updated to be able to work with frames that have more than 4 octets per frame
2014-09-01 15:18:39 +03:00
Adrian Costina 95c143412d fmcomms2: Modified design to work with 4 channel util_adc_pack 2014-08-29 13:53:59 +03:00
Rejeesh Kutty da913864c9 ad9671_fmc: updates to match recent core changes 2014-08-28 13:16:52 -04:00
dbogdan 5a42c10233 projects/fmcomms2/c5soc: Added video output. HPS SPI was replaced by 3 Wire SPI. 2014-08-27 21:46:23 +03:00
Rejeesh Kutty c435edf194 ad9652/zc706: fix dma write 2014-08-27 10:44:39 -04:00
Rejeesh Kutty 7b280b3bbf fmcomms6: zc706 build-only version 2014-08-27 10:44:37 -04:00
Rejeesh Kutty 0e909647b4 fmcomms6: initial checkin 2014-08-27 10:44:36 -04:00
Adrian Costina a49eb5853b ZED, ZC702: Added contraints so that projects can successfully synthesize on linux systems
For ZC706 Fixed one constraint which was not correct
2014-08-26 16:28:41 +03:00
Rejeesh Kutty 5f21f54463 fmcjesdadc1: zc706 version 2014-08-25 14:28:57 -04:00
Rejeesh Kutty cb29b83b05 a5gt: updates to match a5gt 2014-08-25 10:46:59 -04:00
Rejeesh Kutty 76ffb939e5 zc706: ad9625 copy 2014-08-22 11:24:24 -04:00
Rejeesh Kutty fe1eaefcff fmcomms1: zc706 2014-08-22 09:08:55 -04:00
Rejeesh Kutty 280260e54c c5soc: dmac separated slave and master id widths 2014-08-22 09:08:54 -04:00
Rejeesh Kutty f3f8414d81 kcu105: changes for ad_iobuf 2014-08-15 15:01:52 -04:00
Rejeesh Kutty b481df0b5f library: local constraints async groups 2014-08-14 15:09:51 -04:00
Rejeesh Kutty 39bb7ca231 a5soc: fmcjesdadc1+hdmi version 2014-08-14 09:05:38 -04:00