Rejeesh Kutty
7c98a783c5
2014.2 updates
2014-09-23 12:32:33 -04:00
Istvan Csomortani
dd7bac41c1
daq1 : Update project to 2014.2
...
- Cores are upadted
- Concat module does not swap output anymore
- Clock signal name ps7_clk_* changed to clk_fpga_*
2014-09-22 17:33:50 +03:00
Lars-Peter Clausen
41cc92ef49
Remove BASEADDR/HIGHADDR parameters
...
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
Adrian Costina
a49eb5853b
ZED, ZC702: Added contraints so that projects can successfully synthesize on linux systems
...
For ZC706 Fixed one constraint which was not correct
2014-08-26 16:28:41 +03:00
Adrian Costina
6c6cab0e16
fmcomms2: ZC706 modified constraints for linux build machines
...
The added constraints allow the project to successfully pass timing on some ubuntu or debian build machines.
2014-08-01 17:34:36 +03:00
Istvan Csomortani
db1c931736
ad9625_plddr: PL DDR3 fixes
...
- Modified the axi slave interface handler
- Increased the rfifo_mem input depth to prevent overflow
2014-07-23 19:34:44 +03:00
Istvan Csomortani
2b6ce1e504
zc706_plddr3 : Fix axi_fifo2s_axi_mrst net
2014-07-21 15:10:36 +03:00
Rejeesh Kutty
2955b9db78
fifo2s: flush if no request, c5soc: 14.0
2014-07-15 16:25:33 -04:00
Rejeesh Kutty
b434fe6dd5
fmcomms5: register map changes
2014-07-08 16:57:43 -04:00
Rejeesh Kutty
e38813fa9f
fifo- monitor status signals
2014-06-25 12:15:13 -04:00
Rejeesh Kutty
57bb3705f2
zc706-plddr3: read changes to lower dma clock
2014-06-25 09:20:58 -04:00
Rejeesh Kutty
c789dce77e
ad9625/zc706: added pl ddr3 fifo changes
2014-05-29 12:59:29 -04:00
Rejeesh Kutty
56ddce1e8c
dmac: create fifo interface to avoid being treated as axi control stream
2014-05-27 10:25:14 -04:00
Rejeesh Kutty
f73819f4d4
zc706: pl ddr3 initial checkin
2014-05-13 16:19:53 -04:00
Rejeesh Kutty
fbfd658f0d
zc706: added pl ddr3 mig
2014-04-09 15:58:12 -04:00
Istvan Csomortani
f9a67371c0
Zynq Base System: Reset is synchronized to lowest system clock
...
System reset (sys_100m_reset) is synchronized to lowest system
clock (FCLK0), via a Processor System Reset module
2014-03-26 17:58:14 +02:00
Rejeesh Kutty
dc44703cf1
zynq/non-zynq: identical signal names and instances
2014-03-17 17:02:03 -04:00
Rejeesh Kutty
a6da4ca01c
zynq/non-zynq merge variables
2014-03-17 16:39:52 -04:00
Rejeesh Kutty
f3ae57a53e
global clock and reset names
2014-03-11 09:57:59 -04:00
Rejeesh Kutty
ddac1a8834
added common board files
2014-02-28 21:17:01 -05:00