Commit Graph

2485 Commits (5ed2c0b599e9872d3c5f96e7b0bcfb90d7f45415)

Author SHA1 Message Date
Istvan Csomortani 5ed2c0b599 daq1: Update CPLD constraints file 2016-02-12 16:54:36 +02:00
Istvan Csomortani aa2ff0223a daq1: Update CPLD design
+ SPI counter counts on negative edge of the SPI_CLK
+ Shift register for read, shifting MSB first
+ Fix write access logic
+ Update the internal register addresses
2016-02-12 14:45:18 +02:00
Istvan Csomortani e1c5d6a8f7 axi_ad9684: Fix constraint file 2016-02-12 14:38:59 +02:00
Istvan Csomortani c32d7147d5 daq1 : There is a single CSN from master 2016-02-12 14:38:32 +02:00
Istvan Csomortani 9675df15c6 daq1_zc706: Update constraints file 2016-02-12 14:37:02 +02:00
Istvan Csomortani a747fad540 axi_ad9361: tx_valid must be controlled by the TDD controller 2016-02-12 14:33:34 +02:00
Istvan Csomortani e381d5170c util_tdd_sync: Update the synchronization interface
Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-12 14:27:37 +02:00
Istvan Csomortani 1c3795ad02 Update .gitattributes
Add xise file extension to .gitattributes
2016-02-12 14:27:35 +02:00
Rejeesh Kutty bb62f6d225 pzsdr1- updates 2016-02-02 12:34:09 -05:00
Rejeesh Kutty 41b6ebeeaf pzsdr1- updates 2016-02-02 12:33:55 -05:00
Rejeesh Kutty b147e9c94a pzsdr1- updates 2016-02-02 12:33:01 -05:00
Rejeesh Kutty 170295161f pzsdr1- xdc 2016-01-26 11:19:00 -05:00
Rejeesh Kutty bcac3eef4d pzsdr1- initial commit 2016-01-25 16:07:33 -05:00
Rejeesh Kutty 44a382fc69 pzsdr1-added 2016-01-25 15:33:34 -05:00
Istvan Csomortani aa77af6bdf daq1_cpld: Add ISE project file
This file, along with the project source files, is sufficient to open and implement in ISE Project Navigator.
2016-01-21 18:05:59 +02:00
Istvan Csomortani 4cc69c0cac axi_ad9684: Add Makefile 2016-01-19 18:32:11 +02:00
István Csomortáni c865dbf353 axi_ad9680: Fix channel instantiation 2016-01-19 12:49:45 +02:00
István Csomortáni df3eefdca1 axi_ad9434: Update constraint file 2016-01-19 12:43:05 +02:00
Istvan Csomortani 8c69c9d2ce daq1_zc706 : Update the project
+ Add AD9684 to the block design
+ Update the IO definitions
+ Update the CPLD design
+ Add 3wire SPI logic
2016-01-19 11:20:35 +02:00
Istvan Csomortani d1e638349b ad_serdes_clk : The reference clock selection line should by tied to 1
Just the CLKIN1 is used in the MMCM.
2016-01-19 11:18:00 +02:00
Istvan Csomortani c6cfd1a2b6 axi_ad9684: Initial check in 2016-01-19 11:13:45 +02:00
István Csomortáni ab99c4456a ad9434_fmc: Delete unnecessary set_property call
HPx interface is activated by the ad_mem_hpx_interconnect process
2016-01-14 15:41:23 +02:00
Lars-Peter Clausen c094ab8b52 cn0363: Add support for the MicroZed
Add support for connecting the CN0363 to the MicroZed. This works in
combination with the MicroZed Arduino carrier board. The CN0363 needs to be
connected to the PLPMOD header.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
Lars-Peter Clausen 514eb68876 cn0363: Factor out common parts
Factor out the common parts of the cn0363 design so we can use it to add
support for other carriers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
Lars-Peter Clausen d2b26720e6 common: microzed: Add clock, reset and interrupt support
In order for the base project to be usable by other projects it needs to
create the clock, reset and interrupt signals that are expected to exist.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
Lars-Peter Clausen 51d20b1a61 adi_project.tcl: Add MicroZed support
Handle the projects for the MicroZed and set up the FPGA part accordingly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
Lars-Peter Clausen 426490c394 common: Rename uzed to microzed
Everybody calls the MicroZed microzed in their projects. Don't deviate from
that to avoid potential confusion.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:18:57 +01:00
István Csomortáni 4f2b999999 axi_ad9680: Q_OR_I_N is not used in this channel 2016-01-13 16:26:22 +02:00
István Csomortáni 838b558176 axi_ad9434: Fix adc_status
adc_status was not driven by anything. Should be driven by adc_status_m1.
2016-01-13 12:21:42 +02:00
István Csomortáni 2dcd9136aa axi_ad6676: Delete confusing comment 2016-01-13 10:20:18 +02:00
Rejeesh Kutty c397787001 uzed: updates 2016-01-11 15:36:01 -05:00
Rejeesh Kutty a610ebb413 uzed: zed-copy 2016-01-11 13:53:22 -05:00
Istvan Csomortani 02cc926275 daq1: Add CPLD logic and IO constraints 2016-01-04 18:10:46 +02:00
Rejeesh Kutty 2bb19be3d3 pzsdr/ccfmc: sfp io control 2015-12-17 16:18:06 -05:00
Rejeesh Kutty f3fe16a102 pzsdr/ccfmc: camera/sfp pin changes 2015-12-17 16:17:24 -05:00
Rejeesh Kutty ea045a3f9a fmcadc4: change qpll to receive 2015-12-17 12:34:47 -05:00
Rejeesh Kutty 40ab2f5e6a ccfmc: tdd/gpio bit moved to the top 2015-12-17 11:37:57 -05:00
Rejeesh Kutty 83fd4a53a7 daq3/kcu105: updates 2015-12-14 09:29:48 -05:00
Rejeesh Kutty 07316a905e daq3/a10gx: sysref is lvds 2015-12-14 09:29:10 -05:00
Rejeesh Kutty 6a9d1c431a daq3/a10gx: updated to a10gx/quartus 2015-12-11 12:49:25 -05:00
Rejeesh Kutty 4c2d08a9be ad9152: altera syntax error 2015-12-11 12:49:00 -05:00
Rejeesh Kutty da2e1bdc9a daq2/a10gx: 32bits generic gpio 2015-12-11 11:50:26 -05:00
Rejeesh Kutty 650d426301 a10gx/base: set gpio to 32 2015-12-11 10:14:37 -05:00
Rejeesh Kutty dc84a9ad82 daq3/a10gx: updates 2015-12-10 16:06:14 -05:00
Rejeesh Kutty f1b6577447 a10gx/base: separate gpio in/out 2015-12-10 16:04:54 -05:00
Rejeesh Kutty bc93910ee5 ad9152: qsys updates 2015-12-10 16:04:10 -05:00
Rejeesh Kutty ff1d98a0c7 ad9144: duplicate include 2015-12-10 16:02:35 -05:00
Rejeesh Kutty ce906989d5 ad9152: qsys ip 2015-12-10 09:46:31 -05:00
Rejeesh Kutty d944198212 daq3/a10gx: board updates 2015-12-10 09:45:20 -05:00
Rejeesh Kutty 1a38ea205d daq3/a10gx: copy 2015-12-10 09:42:56 -05:00