Commit Graph

21 Commits (5ee948014283b2f07b2a1b790a1e73b772f0f984)

Author SHA1 Message Date
Istvan Csomortani 9055774795 all: Update license for all hdl source files
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.

New license looks as follows:

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.

Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
 (at the option of the user):

  1. The GNU General Public License version 2 as published by the
     Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html

OR

  2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
Istvan Csomortani 3627b892c3 xilinx/ad_cmos_in|out: Delete redundant parameter
The LVCMOS standard is a single ended IO standard. The SINGLE_ENDED
parameter is redundant in this case.
2017-04-25 11:02:35 +03:00
Istvan Csomortani 5b164ad4fa ad_serdes_in: Fix generate block 2017-04-20 18:50:00 +03:00
Istvan Csomortani faa5e3d667 ad_serdes_clk: Fix generate block 2017-04-20 18:49:00 +03:00
Istvan Csomortani f0da125a4e ad_mmcm_drp: Fix generate block
Can not be multiple 'if' statements inside a generate block. If there are
multiple cases use if/esle statement, but always should be one single
if/else inside a generate.
2017-04-20 18:43:37 +03:00
Lars-Peter Clausen 09ffe42603 ad_lvds_in: Allow to disable IDELAY
The IDELAY is not always required, but it eats up power when instantiated. Allow to disable it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
Lars-Peter Clausen 45f87b46c2 ad_lvds_in: Use "SAME_EDGE" mode
Currently the IDDRs are configured in SAME_EDGE_PIPELINED mode, but then
the negative data is delayed by an additional clock cycle. This is the same
behaviour as using the IDDR in SAME_EDGE mode.

Switching to SAME_EDGE mode removes extra pipelining registers while
maintaining the same behaviour.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:39 +02:00
Adrian Costina fc7f2ef11b ad_serdes_out: allow selection between DDR/SDR configuration and output single ended data 2017-04-18 12:17:39 +02:00
Adrian Costina 166a4c53d5 ad_serdes_clk: allow for single ended clock input, made BUFR_DIVIDE configurable 2017-04-18 12:17:39 +02:00
Istvan Csomortani 1c23cf4621 all: Update verilog files to verilog-2001 2017-04-13 11:59:55 +03:00
Istvan Csomortani 8ba6012b6b restructure: Move xilinx specific constraints to /library/xilinx/common/ 2017-03-30 16:16:02 +03:00
Rejeesh Kutty a2b2ebbed2 ad_lvds_in- ultrascale/ultrascale+ sim device mess 2017-01-21 20:54:21 -05:00
Rejeesh Kutty cc6ca4f0f2 ad_lvds_in- ultrascale sim device 2016-10-10 10:39:47 -04:00
Istvan Csomortani ff980551e6 ad_serdes: SERDES_FACTOR handover missing
In modules ad_serdes_in/ad_serdes_out the handover of the parameter
SERDES_FACTOR did not exist, causing unwanted behavioral in case of
factors less than 8.
SERDES_FACTOR must be hand over to DATA_WIDTH parameter of the SERDES
primitive.
2016-10-10 16:38:42 +03:00
Rejeesh Kutty 6b956066ef xilinx/ad_lvds*- ultrascale+ 2016-09-30 11:55:10 -04:00
Istvan Csomortani 38f1521861 xilinx/ad_serdes_in : Fix some typos 2016-09-19 16:02:52 +03:00
Istvan Csomortani ff0f659a33 xilinx/ad_serdes_clk : Rename parameter MMCM_DEVICE_TYPE to DEVICE_TYPE 2016-09-19 16:02:06 +03:00
Istvan Csomortani 6510f92c12 ad_serdes : Cosmetic changes 2016-09-16 14:45:39 +03:00
Rejeesh Kutty a2d15acb89 ad_serdes- altera/xilinx sync 2016-09-15 13:33:55 -04:00
Istvan Csomortani 1d33d7d7ee lib_refactoring: Move the CMOS interface modules to ~/library/xilinx/common 2016-08-08 15:07:42 +03:00
Istvan Csomortani b806fa3b42 lib_refactoring: Move all the Xilinx common modules to library/xilinx/common 2016-08-08 15:06:10 +03:00