Istvan Csomortani
65654b77ff
fmcomms2_kc705: Update design to the new hdl framework
2015-03-13 18:54:28 +02:00
Istvan Csomortani
7befef6662
fmcomms2_zed: Update design to the new hdl framework
2015-03-13 18:52:57 +02:00
Adrian Costina
ea303c6f61
zc702: Updated base design to the latest model
2015-03-13 12:44:08 +02:00
Rejeesh Kutty
8ad8ec4d1e
ml605 removed
2015-03-12 13:00:28 -04:00
Istvan Csomortani
68361bafd4
zc706_base: The FCLK_CLK2 is not used.
2015-03-11 18:10:32 +02:00
Rejeesh Kutty
ae16aeb064
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:15 -04:00
Rejeesh Kutty
d7993401e6
kcu105/adv7511: moved hdmi/spdif out of base design
2015-03-10 16:15:14 -04:00
Rejeesh Kutty
8967903d76
zc706: intr sensitivity level-high
2015-03-10 16:05:05 -04:00
Rejeesh Kutty
a68463d033
rfsom: board updates
2015-03-10 15:26:31 -04:00
Rejeesh Kutty
e38356b243
rfsom: board updates
2015-03-10 15:26:24 -04:00
Rejeesh Kutty
f0395b646c
plddr3: ad_connect updates
2015-03-09 16:07:37 -04:00
Rejeesh Kutty
031dffa80c
zc706: move gpio/spi to base design
2015-03-09 16:07:02 -04:00
Rejeesh Kutty
2302f282d3
sys_dmafifo: ad_connect updates
2015-03-09 16:06:06 -04:00
Rejeesh Kutty
545c0baada
kcu105: gpio led/sw merged to bd default
2015-03-09 16:05:28 -04:00
Rejeesh Kutty
b31d9abd91
kcu105: gpio/spi moved to base design
2015-03-09 16:04:09 -04:00
Rejeesh Kutty
1db5f4696f
kcu105: isolate ddr-300M from interconnect-100M timing
2015-03-06 12:37:31 -05:00
Rejeesh Kutty
91765fdd82
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
Rejeesh Kutty
7bf4141a3f
daq2+base: board tcl updates
2015-03-05 10:56:36 -05:00
Rejeesh Kutty
bf1388b05e
kcu105: rev.d changes
2015-03-04 12:43:04 -05:00
Rejeesh Kutty
383cf3b3a3
rfsom: schematic changes
2015-02-18 14:32:20 -05:00
Rejeesh Kutty
d2e9b1fe03
rfsom: schematic changes
2015-02-18 14:32:04 -05:00
Rejeesh Kutty
996e1b7970
rfsom: constraint updates
2015-02-03 14:20:34 -05:00
Istvan Csomortani
d69d105b5d
vc707_common: Fix address mapping
...
The axi_ethernet/eth_buf/S_AXI_2TEMAC address space and axi_ethernet/eth_mac/s_axi/Reg address
segment does not exist in 2014.4.
2015-01-29 12:22:06 +02:00
Istvan Csomortani
e8ff30119d
vc707_xdc: Delete unnecessary clock definition
2015-01-29 11:39:10 +02:00
Istvan Csomortani
6c8ea24f20
common: Update VC707 base design to 2014.4
2015-01-28 16:24:52 +02:00
Adrian Costina
5a77ab0161
a5gt:common: Added phy reset signal from ethernet in pin assignments
2015-01-23 12:31:41 +02:00
Adrian Costina
050f17e034
a5gt3: common: corrected naming in pin assignments. added reset signal from FPGA2
2015-01-23 12:30:16 +02:00
Rejeesh Kutty
72e89852b6
daq2/kc705: 2014.4 updates
2015-01-14 12:58:08 -05:00
Rejeesh Kutty
b595cce697
kcu105-daq2-2014.4-- intermediate fixes
2015-01-13 13:40:18 -05:00
Rejeesh Kutty
b0b4bfe531
kcu105-daq2-2014.4-- intermediate fixes
2015-01-13 13:40:17 -05:00
Adrian Costina
47871287f3
kc705: Updated base project with linear flash. Updated all depending projects
2015-01-13 10:19:07 +02:00
Rejeesh Kutty
65d9f08763
zc706: mig 2014.4
2015-01-09 14:12:52 -05:00
Rejeesh Kutty
868df1aac8
zc706: mig 2014.4
2015-01-09 14:12:51 -05:00
Adrian Costina
f566268db5
zed_common: Updated common to 2014.4
2015-01-08 11:59:26 +02:00
Rejeesh Kutty
eb569b991d
dmafifo- remove util fifo setup
2015-01-06 16:23:14 -05:00
Rejeesh Kutty
9e707d8a33
rfifo: wrapper updates
2015-01-06 16:17:33 -05:00
Rejeesh Kutty
a944deebd5
wfifo: wrapper updates
2015-01-06 16:17:25 -05:00
Rejeesh Kutty
61ba4f4357
rfsom: updated to rfsom
2014-12-23 14:03:58 -05:00
Rejeesh Kutty
614dfcd93c
rfsom: updated to rfsom
2014-12-23 14:03:57 -05:00
Rejeesh Kutty
ee52602c89
rfsom: initial commit
2014-12-23 14:03:55 -05:00
Rejeesh Kutty
0de1a38245
zc706: 2014.4 update
2014-12-23 14:03:52 -05:00
Adrian Costina
71baa129a7
VC707: Fixed linear flash timings
2014-12-19 15:45:14 +02:00
Istvan Csomortani
59e610be09
zc706_constr: Move the sys_rst related constraint definition to zc706_system_mig_constr.xdc
2014-12-17 19:07:43 +02:00
Rejeesh Kutty
77fa96fa67
plddr3: sys-rst from board pushbutton
2014-12-15 12:58:54 -05:00
Rejeesh Kutty
ed7f8b4908
plddr3: sys-rst from board pushbutton
2014-12-15 12:58:44 -05:00
Istvan Csomortani
caa0268434
base_design: External IIC reset is connected to Vcc
...
External IIC reset is connected to Vcc in case of AC701, KC705 and VC707
2014-12-11 11:13:07 +02:00
Rejeesh Kutty
e7c920bbd9
fmcomms2/ml605: compilation fixes
2014-12-09 14:32:39 -05:00
Istvan Csomortani
a6b7b9d880
ad9467_kc705: Fix memory segment offset for SEG_axi_ddr_cntrl
2014-12-09 16:20:39 +02:00
Michael Hennerich
7e18162632
projects/common/kcu105/kcu105_system_bd: Restore axi_ethernet SupportLevel 0
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:48:37 +01:00
Istvan Csomortani
34ffa15b12
zynq_plddr3: Fix PLDDR3's Reset Generator
...
Reset generator's external reset signal was active low, but the GT reset is active high, and both the DDR controller and FIFO2S were in reset.
Therefore the external reset active state is changed to active high. This setup in general is made by the tool automatically, in order to do it correctly, need to
set this two property of the reset generator.
2014-12-04 15:39:17 +02:00