Lars-Peter Clausen
328205c31d
fmcomms2: c5soc: Set DMA transfer length to 24 bits
...
14 bits is a bit to low and we use 24 bits everywhere else as well.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-09 15:05:06 +02:00
Lars-Peter Clausen
50faf0c53a
Remove executable flags from non-exectuable files
2014-09-09 15:05:06 +02:00
Adrian Costina
95c143412d
fmcomms2: Modified design to work with 4 channel util_adc_pack
2014-08-29 13:53:59 +03:00
dbogdan
5a42c10233
projects/fmcomms2/c5soc: Added video output. HPS SPI was replaced by 3 Wire SPI.
2014-08-27 21:46:23 +03:00
Rejeesh Kutty
280260e54c
c5soc: dmac separated slave and master id widths
2014-08-22 09:08:54 -04:00
Adrian Costina
6c6cab0e16
fmcomms2: ZC706 modified constraints for linux build machines
...
The added constraints allow the project to successfully pass timing on some ubuntu or debian build machines.
2014-08-01 17:34:36 +03:00
Rejeesh Kutty
7bee85423d
c5soc: removed stp/cdf files
2014-07-24 20:53:08 -04:00
Rejeesh Kutty
59759a8ab3
c5soc: working hdl version
2014-07-24 20:51:41 -04:00
Adrian Costina
7000897031
fmcomms2, fmcomms5: updated util_adc_pack and util_dac_unpack
...
The cores now support up to 8 channels, in 1, 2, 4, 8 channel active configuration
2014-07-24 19:57:22 +03:00
Rejeesh Kutty
c0e31aa6c2
daq2: latest hardware
2014-07-21 09:06:57 -04:00
Rejeesh Kutty
e3320c43cb
fmcomms2/c5soc: programmer file
2014-07-21 09:06:55 -04:00
Rejeesh Kutty
9b9e0c6a56
fmcomms2/c5soc: signal tap
2014-07-21 09:06:54 -04:00
Rejeesh Kutty
2955b9db78
fifo2s: flush if no request, c5soc: 14.0
2014-07-15 16:25:33 -04:00
Adrian Costina
39ac29bb01
AD9361: Altera, modified address width so that all registers are accessible
...
Modified qsys project with the new address span
2014-07-08 10:41:51 +03:00
dbogdan
10c21a343a
fmcomms2/c5soc: Fixed the spim0_ss_in_n value.
2014-07-08 10:07:31 +03:00
dbogdan
c53b257ab1
fmcomms2/c5soc: Fixed the MOSI and MISO pin assignments.
2014-07-07 22:28:25 +03:00
Rejeesh Kutty
a388ccab0a
fmcomms2/c5soc: initial checkin
2014-07-02 14:56:00 -04:00
Rejeesh Kutty
9a08189b93
c5soc: initial a5soc copy
2014-07-01 13:09:38 -04:00
Rejeesh Kutty
ba7955c531
fmcomms2: register map modifications
2014-06-26 10:09:03 -04:00
Adrian Costina
bef6a9c32c
axi_ad9361: Split dma data into individual channels for both ADC and DAC
2014-06-07 17:15:31 +03:00
Adrian Costina
2837d788a6
mitx045: Added I2S core to the base design
2014-06-06 17:53:47 +03:00
Adrian Costina
f217139770
fmcomms2: added project for mini_itx, xc7z045 version
2014-06-02 14:06:10 +03:00
Istvan Csomortani
1d53d79e25
fmcomms2/common: Fix ad9361's interface
...
Loopback the l_clk to clk. l_clk is the device sampling clock, clk is used to
synchronize the cores in case of a multiple device configuration.
2014-05-21 10:09:54 +03:00
Istvan Csomortani
25e4520726
fmcomms2/common: Delet trailing white spaces
2014-05-21 09:47:37 +03:00
Rejeesh Kutty
51c0ee1e20
ml605: tcl updates
2014-05-06 09:29:21 -04:00
Rejeesh Kutty
e7cbaca216
ml605: initial checkin
2014-05-05 11:24:12 -04:00
ATofan
5aac9d7288
FMCOMMS2 added sync option
...
Added signals to allow synchronisation of multiple AD9361.
2014-04-10 10:46:42 +03:00
ATofan
9676146725
FMCOMMS2 AC701 Project
...
Not tested - must program Vadj on board
2014-04-01 15:35:44 +03:00
ATofan
e597467447
FMCOMMS2 VC707 Project
2014-04-01 15:34:29 +03:00
ATofan
814b0d72d6
Modified Reset signals for FMCOMMS2 base design
...
Made all resets the same (sys_100m_resetn)
2014-04-01 15:32:48 +03:00
ATofan
f8c1179bc1
FMCOMMS2 KC705 Project.
...
Added the files required for the FMCOMMS2 KC705 project.
Both DMA and DDS work.
2014-03-24 11:48:52 +02:00
ATofan
31a1ff384d
FMCOMMS2 Base Design tcl modified
...
Added support for both Zynq and MicroBlaze projects
2014-03-21 09:57:52 +02:00
ATofan
2c898bf3a2
Added ZC706, ZC702 and ZED FMCOMMS2 Vivado Project
...
ZC706 runs rx_clk at 250 MHz.
ZC702 and ZED run rx_clk at 200 MHz due to slower fabric.
The ZC702 and ZED projects need init_user in the boot procedure in order for the HP Ports to work correctly.
Both DDS and DMA mode work.
2014-03-18 15:27:42 +02:00
ATofan
ee56db8d50
FMCOMMS2: Modified FCLK2 to 125 MHz, and xdc file
...
tcl: FCLK2 was modified from 100 MHz to 125 MHz.
xdc: rx_clk period constraint was redefined from 8ns (125 MHz) to 4ns (250 MHz)
2014-03-14 16:27:56 +02:00
ATofan
a6c3cb29c6
Modified SPI and ILA in fmcomms2_bd.tcl
2014-03-12 16:52:22 +02:00
Rejeesh Kutty
66c6b2b182
fmcomms2: added
2014-03-11 20:04:26 -04:00