7ccc505950
projects/ad7134_fmc: Add FMC pinout description
...
* Added txt description of all FMC pins used/unused
* Updated constraint files with FMC pinout location
Signed-off-by: laurentiu_popa <Laurentiu.Popa@analog.com>
2023-10-19 13:56:12 +03:00
c9a7d4d927
Add copyright and license to .tcl, .ttcl files
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-25 15:22:26 +03:00
1cac2d82e1
Add copyright and license to .xdc files
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-25 11:03:02 +03:00
28c06d505f
Add/edit copyright and license for .v, .sv files
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-11 15:17:41 +03:00
2ae09c9808
Check guidelines. Remove redundancies
...
* Removed empty/commented lines
* Regenerated Makefiles
* Removed redundancies adc channels data width
* Set data width 32-bit: max resolution and CRC header
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
2023-03-29 15:08:07 +03:00
1bef2bf304
projects/ad7134_fmc: Update bd SPIE hierarchy, spi trigger, ODR
...
* Updated bd spi hierarchy, see library/spi_engine.tcl
* Enabled ext_clk for PWM to use 96 MHz spi clk
* Modified PWM channels used:
- ch1: ODR - 850 ns period, 130 ns high time
==> max fODR = 1.18 MHz
- ch0: trigger - 850 ns period, 30 phase shift
==> 10 ns between falling ODR rising DCLK
* Changed spi offload trigger signal:
- replaced edge detect,sync_bits IPs with PWM trigger
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
2023-03-29 15:08:07 +03:00
db94628cc6
library & projects: Update Makefiles
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-01-27 11:54:05 +02:00
72313df81f
Updated the makefiles to build the projects in subdirectories based on the build parameters.
...
Running 'make' will build the default project directly in the project folder (like it did before)
Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory.
Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory.
Running 'make clean' will clean the default project only.
Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build.
Running 'make clean-all' will delete all the built configurations and libraries.
Note that the 'JESD' and 'LANE' words from the parameter names are stripped.
Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-11-14 09:38:42 +02:00
482f0489a3
scripts: Merge adi_env.tcl into a single file
...
Move the new adi_env.tcl file from hdl/projects/scripts into hdl/scrips
2022-08-08 13:52:54 +03:00
961ebe0cc2
projects: Update .v files according to guideline
...
Deleted lines after endmodule and consecutive empty lines.
Modified parentheses, extra spaces.
Fixed indentation.
Fixed parameters list to be each parameter on its line.
Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-06-28 18:06:56 +03:00
4827e5eb18
ad7134_fmc: Switch offload trigger to falling ODR
2022-02-07 14:41:25 +02:00
297bed6721
ad7134_fmc: Change ODR signal to output
...
FPGA is now generating the ODR signal using axi_pwm_gen.
Both ADCs are now in slave mode.
2022-02-07 14:41:25 +02:00
591a23156b
Makefiles: Update header with the appropriate license
2021-09-16 16:50:53 +03:00
6f2f2b8626
makefile: Regenerate make files
2021-01-20 01:02:56 +02:00
acbbd4636a
sysid: Upgrade framework, header/ip are now at 2/1.1.a
...
Unify tcl scripts; rename adi_pd_intel.tcl to adi_pd.tcl
add git branch to internal use area; update log prints;
update xilixn projects; fix cn0506 sysid script;
2021-01-20 01:02:56 +02:00
9093a8c428
library: Move ad_iobuf to the common library, as it's not Xilinx specific
...
Updated all system_project and Makefiles
2020-11-02 16:13:35 +02:00
d8ab27b2af
sysid: Remove cstring init string
2020-09-30 19:12:24 +03:00
4d54c7e2d6
spi_engine_execution: Merge the SDI lines into one vector
...
This modification will help to support multiple SPI engine
execution setups (e.g. different NUM_OF_SDI) for the same project.
2020-05-19 09:28:02 +03:00
32eeedb660
makefile: Update makefiles
2020-05-07 08:41:49 +01:00
c44b4957b5
ad7134_fmc/zed: Fix IO definitions for SDI lines
2019-11-27 10:04:37 +02:00
aa5fdf903e
Makefile: Update makefiles
2019-08-26 16:58:01 +03:00
0680e44330
system_id: deployed ip
2019-08-06 16:53:11 +03:00
a589753d92
project/scripts: Rename adi_project.tcl to adi_project_xilinx.tcl
2019-06-29 06:53:51 +03:00
43725429ac
adi_project: Rename the process adi_project_xilinx to adi_project
2019-06-29 06:53:51 +03:00
7fa620d253
gtm_projects: Update system_top
...
In the latest system_top file we are not bringing out all the interrupt
signals from the block design. Delete all interrupt ports from the
system_wrapper instance.
Following projects were changed:
- AD5766_SDZ
- AD7134_FMC
- AD7616_SDZ
- AD77681EVB
- AD7768EVB
- ADAQ7980
2019-06-28 11:18:29 +03:00
21ce53f765
Revert "Move GTM projects to gtm_projects branch"
...
This reverts commit 171093eca4
2019-06-28 11:18:29 +03:00
171093eca4
Move GTM projects to gtm_projects branch
2018-06-15 16:28:40 +03:00
377247a434
Regenerate project Makefiles using the new shared Makefile includes
...
This reduces the amount of boilerplate code that is present in these
Makefiles by a lot.
It also makes it possible to update the Makefile rules in future without
having to re-generate all the Makefiles.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-11 15:09:54 +03:00
425e803364
license: Fix a spelling mistake
2018-04-11 15:09:54 +03:00
53fa482837
ad7134_fmc: Initial commit
2018-04-11 15:09:54 +03:00
laurentiu_popa
Iulia Moldovan
Bogdan Luncan
Iacob_Liviu
sergiu arpadi
Adrian Costina
Istvan Csomortani
Lars-Peter Clausen