Lars-Peter Clausen
d7e87a60a9
Remove executable flag from non-executable files
...
All of these files are source code and are not executable standalone.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-07-28 17:56:07 +02:00
Istvan Csomortani
84b2ad51e2
license: Add some clarification to the header license
2017-05-31 18:18:56 +03:00
Istvan Csomortani
85ebd3ca01
license: Update license terms in hdl source files
...
Fix a few gramatical error, fix the path of the top level license
files.
2017-05-29 09:55:41 +03:00
Istvan Csomortani
9055774795
all: Update license for all hdl source files
...
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.
New license looks as follows:
Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.
Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
(at the option of the user):
1. The GNU General Public License version 2 as published by the
Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
OR
2. An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
Rejeesh Kutty
c728299e71
altera- default to latest version
2017-05-12 13:25:17 -04:00
Istvan Csomortani
1c23cf4621
all: Update verilog files to verilog-2001
2017-04-13 11:59:55 +03:00
Istvan Csomortani
c1bdfca4c3
library: Delete all adi_ip_constraint process call
2017-04-06 12:36:47 +03:00
Istvan Csomortani
e0efbe210e
constraints: constraint files should be specified at adi_ip_files
2017-04-03 18:12:28 +03:00
Rejeesh Kutty
c277b39796
arradio/c5soc- critical warnings fix
2017-03-20 12:14:13 -04:00
Istvan Csomortani
ac2e5a9dac
constraints: Update constraints
...
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-24 13:43:32 +02:00
Adrian Costina
8ebc8fe4e2
updated makefiles
2016-12-09 23:06:41 +02:00
Adrian Costina
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
Rejeesh Kutty
4f0d7bd6eb
util_wfifo: read after write is complete
2016-07-11 09:59:31 -04:00
Rejeesh Kutty
c293c04634
hdl make updates
2016-06-01 13:53:09 -04:00
Rejeesh Kutty
bf0b90229a
rfifo/wfifo- qsys ip
2016-05-18 13:24:13 -04:00
Rejeesh Kutty
285cbc7225
xfifo- fix sdc/xdc names
2016-05-18 13:24:13 -04:00
Rejeesh Kutty
4fbff45e27
util_wfifo- updates
2016-05-16 12:19:38 -04:00
Rejeesh Kutty
f515885fc4
util_wfifo: altera ip
2016-05-16 12:19:38 -04:00
Istvan Csomortani
900db3d8ed
util_wfifo: Fix reset related timing violation
...
The memory instance reset connected to ground, rather than connect to dout_rstn.
2015-09-23 16:36:33 +03:00
Istvan Csomortani
516c59523d
util_wfifo: Cosmetic changes.
2015-09-23 16:36:31 +03:00
Adrian Costina
46808c4c41
util_wfifo: Changed some reset for several registers from asynchronous to synchronous for better integration with the FIFO
2015-09-16 18:55:47 +03:00
Istvan Csomortani
57cfb7cfb1
hdl/library: Update the IP parameters
...
The following IP parameters were renamed:
PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Istvan Csomortani
46fa91d5be
Makefile: Update Make files
2015-07-03 18:08:57 +03:00
Lars-Peter Clausen
6862655b0d
Add .gitattributes file
...
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
Rejeesh Kutty
ce60056cd5
wfifo: async reset for cpu side
2015-06-05 12:44:04 -04:00
Rejeesh Kutty
ab1f9bed10
wfifo: remove srl from sync registers
2015-06-05 12:44:04 -04:00
Rejeesh Kutty
cb0324c2b1
wfifo: multi-channel option
2015-06-05 09:19:05 -04:00
Adrian Costina
463c4d4d28
util_wfifo: Added constraint for the resetn path
2015-04-30 12:05:02 +03:00
Adrian Costina
288b9cccff
Makefile: Added makefiles for imageon_loopback project. Updated axi_ad9152, util_gmii_to_rgmii, util_wfifo to include constraints file
2015-04-28 15:22:37 +03:00
Adrian Costina
67c581cef8
util_wfifo: Updated to be used with adc_rst from the adc_clk clock domain
2015-04-28 14:50:00 +03:00
Adrian Costina
1ad87aa27c
util_wfifo: Added constraints
2015-04-27 11:19:56 +03:00
Adrian Costina
dc2b37bd0c
Makefile: Added top level Makefile. Modified behavior of clean and clean-all
...
Clean ran for a project will clean only the project files.
Clean-all ran for a project will clean also the library files on which the project depends.
The clean commands will only remove specific files and directories.
The top Makefile allows several options(per suggestion from jameyhicks):
make fmcomms1.zed will run "make all" in projects/fmcomms1/zed/
make clean will run "make clean" for all the projects
make clean-all will run "make clean" for all the projects and libraries
make lib will run "make all" for the library files
2015-04-17 17:22:38 +03:00
Adrian Costina
374f82e7de
makefiles: The clean command for library won't remove the xml files, except for component.xml.
...
Updated also the dmac dependencies
2015-04-16 11:53:27 +03:00
Rejeesh Kutty
5f8e9a74ea
makefile: updated
2015-04-07 16:32:01 -04:00
Adrian Costina
f79a152958
Makefiles: updated all makefiles adding clean functionality
2015-04-03 11:57:54 +03:00
Rejeesh Kutty
ba2e635918
makefile: added
2015-04-01 16:28:20 -04:00
Adrian Costina
6ee9b3a1e2
util_wfifo: Fixed reset
2015-03-25 15:34:21 +02:00
Rejeesh Kutty
8056574bae
util_wfifo: renamed ports to make vivado happy
2015-01-06 16:16:25 -05:00
Rejeesh Kutty
36b041ccc0
util_wfifo: port name fixes & doc.
2015-01-06 16:15:42 -05:00
Adrian Costina
2744d0cb37
util_wfifo: Update to implement flip flops
2014-11-17 12:10:21 +02:00
Rejeesh Kutty
403fe1b373
wfifo: read only if ready is asserted
2014-10-31 13:05:17 -04:00
Rejeesh Kutty
f0b25c39a3
wfifo: added axi stream support
2014-10-15 14:50:56 -04:00
Rejeesh Kutty
e38813fa9f
fifo- monitor status signals
2014-06-25 12:15:13 -04:00
Rejeesh Kutty
af07f8874f
wfifo/rfifo: asynchronous interface
2014-04-10 14:01:40 -04:00
Rejeesh Kutty
f9dfd944c9
library/util_fifo: updates for read side
2014-03-10 14:48:14 -04:00
Rejeesh Kutty
a6d747411e
util_wfifo: ip cleanup
2014-03-10 11:21:20 -04:00
Rejeesh Kutty
d6256e9e29
library: dds and dcfilter changes, added fifo wrappers
2014-03-10 11:11:16 -04:00