f245448976
ad_ip_jesd204_tpl_ : Add missing dependency
2022-02-07 19:14:01 +02:00
b5092662d5
ad_ip_jesd204_tpl_adc: Refactor external sync
...
- Add EXT_SYNC option
- Gate valid while in reset
2022-02-07 19:14:01 +02:00
8c7cca4277
common/up_adc_common: Add ext sync regs
2022-02-07 19:14:01 +02:00
1b06c74919
common/up_dac_common: Add manual sync request
2022-02-07 19:14:01 +02:00
db49aa652f
common/up_dac_common: Add support for explicit disarm control
2022-02-07 19:14:01 +02:00
4e644e4e74
jesd204/ad_ip_jesd204_tpl_dac: External sync refactor
...
- Expose EXT_SYNC parameter to sw
- Add external manual sync request
- Add rst to interface
2022-02-07 19:14:01 +02:00
1ca5abc91e
common/up_xfer_cntrl: Fix transfer done timing
...
up_xfer_done should signalize when a previous control set is
transferred to the other clock domain and the current control set is latched.
If a bit from the up_data_cntrl changes, it should stay in that state until
the up_xfer_done asserts.
2022-02-07 19:14:01 +02:00
170ce42e3e
util_mii_to_rmii: Initial commit
2022-02-03 10:23:12 +02:00
38f3627695
ad_dds: Fix DDS start samples
...
When using a CLK_RATIO > 1 the first n samples(n=CLK_RATIO) after sync, are
noisy. This is because the phase accumulator data is passed to the phase to
amplitude converter, during the phase synchronization step.
2022-01-31 14:07:11 +02:00
b26b4c00f0
ad9783: Clean-up parameters and module instances
2022-01-25 18:24:43 +02:00
889447e900
axi_ad9361: make IODELAYCTRL insertion optional
2022-01-25 09:50:31 +02:00
bc8e7881f2
axi_dmac: Hook up ID
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2022-01-25 09:50:22 +02:00
f3cf7508c8
ad9783: Update Makefile
2022-01-20 12:31:57 +02:00
9d94f21d89
scripts/adi_xilinx_device_info_enc.tcl: Change regex for vcu128
...
The regex does not match vcu128 as Ultrascale+. It matches for Ultrascale.
2022-01-12 17:32:47 +02:00
9d8097389c
library/jesd204/jesd204_common/pipeline_stage.v: Initialize pipeline stage register
2022-01-12 13:43:20 +02:00
080925e8fe
library/jesd204: tpl timing bug fix
2022-01-12 10:14:55 +02:00
08f029c757
axi_ad9783: Initial commit
2022-01-07 14:04:08 +02:00
fcd3bfd349
util_pulse_gen: Reload registers when counter is at one
...
This patch fixes an issue where the pulse width is only updated two
periods after the current one.
Signed-off-by: David Winter <david.winter@analog.com>
2022-01-04 15:02:05 +02:00
c2d960e029
axi_adrv9001: Add external sync support
...
The external sync must be synchronous to the reference clock, in order
to obtain a deterministic synchronization of the interface.
2021-12-16 15:16:30 +02:00
41525f348b
axi_adrv9001/axi_adrv9001_core.v: Disable TDD and IOCTRL if second SSI interface is disabled
2021-12-08 17:31:53 +02:00
dfe153dc68
axi_adrv9001/axi_adrv9001_tdd.v: Add disable option for TDD
2021-12-08 17:31:53 +02:00
8cc0367e8f
axi_adrv9001: Hide disabled interfaces
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-12-08 17:31:53 +02:00
6a4b46ebb4
axi_adrv9001: Make Rx2 and Tx2 source synchronous interfaces optional
...
If the Rx2 and Tx2 SSI are disabled the rx1,tx2 data paths are forced to
R1 mode.
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-12-08 17:31:53 +02:00
c1ca578343
axi_ad7616: Fix sync port
2021-11-22 15:22:16 +02:00
8e0a45dea9
jesd204_rx/jesd204_lane_latency_monitor.v: Fix for datapath width of 4
...
Current implementation is correct only for datapath width of 8.
The buswidth of latency measurement inside a beat has a fixed width (3 bits)
for each lane that must be taken in account when computing the total latency.
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-19 18:14:43 +02:00
7e5a638386
jesd204_versal_gt_adapter_rx/tx: Infer Versal GT interface
2021-11-19 14:01:48 +02:00
b25c37a8cc
axi_adrv9001/intel: Add dummy parameters to match Xilinx interface
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-12 14:09:14 +02:00
36d0a8b3e8
library:util_pad: Initial version
...
Data to DMA/system memory must be presented in widths of multiple of 8 bits,
however this padding is not optimal if is done in the transport layer
since this will affect the DAC/ADC FIFO or offload storage.
This utility block adds or removes padding from sample stream in case the
sample with is not multiple of 8 bits, and can be placed between the DMA
and FIFO/Offload blocks.
2021-11-10 14:03:34 +02:00
cb8cf4b3d2
jesd204/scripts: Helper procedure for TPL width calculation
2021-11-10 14:03:34 +02:00
5dd9fd4832
axi_dmac: Allow wider FIFO/AXI Stream interface
...
On large projects with multiple channels the databus on the FIFO/AXI
stream interface can get wider that 1024 bits.
This commit allows a wider range for all the interfaces,
in case for the memory mapped interfaces where the range is 32-1024 the
user selects a bus width out of range that will be handled by the IPI.
2021-11-10 14:03:34 +02:00
fcb16daf5b
axi_adrv9001: Add the option of global clock buffers on 7 series
...
Using global clock can help placement issues where the logic does not fits in one
clock region.
2021-11-08 13:53:51 +02:00
7112fbce7e
library/scripts/adi_xilinx_device_info_enc.tcl: Add K26 support
2021-11-08 09:23:02 +02:00
5d7f4672f5
axi_i2s_adi: initialize cdc_sync_stage0_tick bits to '0'
2021-11-08 08:52:01 +02:00
18ab43b5a1
axi_hdmi_tx: Add UltraScale+ architecture to Verilog
2021-11-08 08:52:01 +02:00
a381fe3e92
ad_ip_jesd204_tpl_adc: Add value of 14 to CONVERTER_RESOLUTION parameter
...
Added new allowed value of 14 for the CONVERTER_RESOLUTION parameter.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-11-04 12:18:06 +02:00
3c07861ee8
generate_xml.sh: Replace < and > in error message
...
Replace < with < and > with > in ERRS to not broke created xml.
Signed-off-by: stefan.raus <stefan.raus@analog.com>
2021-11-03 15:22:45 +02:00
70cc53bbc8
ad_ip_jesd204_tpl_dac: Move external dac sync bit
2021-10-27 18:36:47 +03:00
7b0922e4dc
library/common/up_adc_common.v: Remove tabs
2021-10-27 18:36:47 +03:00
a9c9636780
library/common/up_dac_common.v: Cleanup spaces
2021-10-27 18:36:47 +03:00
9b7c2852b6
adxcvr: Increase version to 17.5.a
...
Add suport for XCVR phase adjust buffer status:
- Expose TXBUFSTATUS and RXBUFSTATUS
- Create RXBUFSTATUS_RST flag for clearing RXBUFSTATUS
2021-10-27 14:40:50 +03:00
d493b724f2
axi_adrv9001/adrv9001_rx.v: Simplify clocking
2021-10-27 14:40:08 +03:00
6a5d2f76d5
data_offload: Fix oversized TX input transactions
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-10-27 14:26:22 +03:00
cd6024b341
Revert "data_offload: Fix oversized inputs in TX mode"
...
This reverts commit 0e8f55b2d7
2021-10-27 14:26:22 +03:00
52df3c4937
ad463x_data_capture: Remove tb
2021-10-26 15:58:54 +03:00
076e81a17c
library: Add link to wiki for IPs
2021-10-25 10:44:53 +03:00
6a526f4bb6
ad463x_data_capture: Initial commit
...
IP required to support echo and master clock mode
2021-10-18 16:13:31 +03:00
5ac64b021f
spi_engine_execution: Delete control loop-back in sdi_data_valid generation
2021-10-18 16:13:31 +03:00
6570c23a76
axi_spi_engine: Add generic config params
...
The 4 parameters are added to facilitate transmiting project
related information to the software. They act as read-only
memory which is written in Vivado when the project builds.
Set 31 to SDI FIFO's almost full threshold
2021-10-18 16:13:31 +03:00
f86ae28e50
spi_engine/data_reorder: Initial commit
...
In case of multiple SDI (MISO) lanes, the samples arrives in a parallel
fashion. For example in case of 4 MISO line, at the first latching clock
edge 4 bits of a sample will be saved, one bit into each shift register.
The data reorder module reconstruct the incoming samples from the AXI
stream of the offload module.
2021-10-18 16:13:31 +03:00
6565c5d018
library/tb: Improve run_tb.sh
2021-10-18 16:13:31 +03:00
Laszlo Nagy
alin724
AndreiGrozav
Iulia Moldovan
LIacob106
Filip Gherman
David Winter
sergiu arpadi
Nicola Corna
Dan Hotoleanu
stefan.raus
Istvan Csomortani