Commit Graph

3301 Commits (99f72a9b3b7a72e7aa74fc5928f582092b0faf47)

Author SHA1 Message Date
Istvan Csomortani 99f72a9b3b util_gtlb: this core is obsoleted
The util_gtlb core is obsoleted by xilinx/axi_xcvrlb
2016-12-12 14:23:47 +02:00
Istvan Csomortani 5c8dde8483 util_jesd_gt: this core is obsoleted
The util_jesd_gt core is obsoleted by xilinx/util_adxcvr and altera/avl_adxcvr
2016-12-12 14:15:38 +02:00
Adrian Costina 8ebc8fe4e2 updated makefiles 2016-12-09 23:06:41 +02:00
Istvan 06aab8ebbd pzsdr1: Set the device core to 1R1T mode 2016-12-09 16:35:46 +02:00
AndreiGrozav 8e69c838e1 common/ac701: Connect axi_ddr_cntrl/device_temp_i to GND 2016-12-09 13:54:39 +02:00
Istvan 23c91ca48a pzsdr1/lvds: The interface runs at max 122.88 MHz 2016-12-09 11:45:11 +02:00
Rejeesh Kutty f799c40cf0 usdrx1/a5gt- xcvr interface changes 2016-12-08 16:05:23 -05:00
Rejeesh Kutty 854cd44026 ad9671- xcvr interface changes 2016-12-08 16:05:23 -05:00
Rejeesh Kutty c114888956 usdrx1- updates 2016-12-08 16:05:23 -05:00
AndreiGrozav b0eff57b0f fmcomms2/zc702: Fix critical warnings 2016-12-08 19:54:52 +02:00
AndreiGrozav 3dceb53984 fmcadc2/vc707: Fix timing violations 2016-12-08 19:51:18 +02:00
Istvan 252c67ceff fmcomms6: Delete project
This project will not be supported in further releases.
2016-12-08 17:22:41 +02:00
Rejeesh Kutty fb287d0178 kcu105- updates to match xilinx trd 2016-12-08 09:32:33 -05:00
AndreiGrozav 3bc9df4c51 fmcomms5: Fixed the wornings created by TDD missing connections to axi_ad9361 core 2016-12-07 21:43:19 +02:00
AndreiGrozav 8eaae98728 fmcadc2: Updates 2016-12-07 21:43:19 +02:00
Rejeesh Kutty 801da3cb25 daq3/kcu105- fix timing violations 2016-12-06 12:31:40 -05:00
Rejeesh Kutty 2d7fb03b93 adrv9371x/a10gx- fix os xcvr parameters 2016-12-06 12:31:40 -05:00
Istvan Csomortani ad96c5e881 daq3/zc706: Change the speed grade of the FPGA to 3 2016-12-06 15:24:23 +02:00
Istvan Csomortani 8f94103f8b daq1/a10gx: Makefile fix 2016-12-06 15:24:23 +02:00
Istvan Csomortani 95ee7c093c daq1/a10gx: Update system_bd port names 2016-12-06 15:24:23 +02:00
Istvan Csomortani b7143a7a3b daq1/a10gx: Update IO pin assignments 2016-12-06 15:24:22 +02:00
Istvan Csomortani a415625069 daq1/a10gx: Add spi wrapper file to the project 2016-12-06 15:24:22 +02:00
Istvan Csomortani e30a80fda0 daq1_spi: Delete device specific macro instantiation 2016-12-06 15:24:21 +02:00
Istvan Csomortani 977e6d9189 adi_ip_alt: Fix some typo 2016-12-06 15:24:21 +02:00
Istvan Csomortani 7876c8ffa4 axi_ad9684: Add loaden and phase ports for altera support 2016-12-06 15:24:20 +02:00
Istvan Csomortani a7d3df8757 axi_ad9684: Update hw tcl script for altera 2016-12-06 15:24:20 +02:00
Istvan Csomortani b0a5be8565 axi_ad9122: Add loaden port for altera support 2016-12-06 15:24:20 +02:00
Istvan Csomortani cedca30cd6 axi_ad9122: Update hw tcl script for altera 2016-12-06 15:24:19 +02:00
Istvan Csomortani 0715c962f1 altera/ad_serdes: Fix net alignment for rx_out at ad_serdes_in 2016-12-06 15:24:19 +02:00
Istvan Csomortani 6cf9df50e3 altera/ad_serdes: Define DEVICE_FAMILY in hw script 2016-12-06 15:24:18 +02:00
Adrian Costina 7a8dc92b84 usb_fx3: Add interrupt monitor and increase ILA data depth 2016-12-06 11:55:28 +02:00
Adrian Costina 1e4bdea80c usrpe31x: Fix Makefile 2016-12-06 11:07:42 +02:00
Rejeesh Kutty 4b7bf422ee pzsdr2/ccbox- remove imu intr on pl 2016-12-05 10:21:42 -05:00
Rejeesh Kutty 351811e13f pzsdrx/ccbox- imu intr on gpio 2016-12-05 10:18:40 -05:00
Istvan Csomortani 8b8c37e2e2 scripts/adi_ip: Remove AXIMM inference from adi_ip_infer_interfaces
The AXI Memory Map interface is infered in the adi_ip_properties process.
Infer it again in the adi_ip_infer_interfaces brakes the flow,
the tool will not find the cell's address segment, so there will not be
any address space assigned to the AXI interface.
Affected cores were axi_i2s_adi and axi_spdif_tx.
2016-12-05 14:33:39 +02:00
Lars-Peter Clausen 753f4bd06e axi_intr_monitor: Slightly modify counter start points
Start the counter_to_interrupt_cnt counter when the counter_to_interrupt
value is written to the register map. This gives applications better
control over when the counter starts counting.

Also start the counter_from_interrupt on the rising edge of the interrupt
signal to avoid bogus values.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-12-02 20:09:29 +01:00
Lars-Peter Clausen 334ce5ddc0 axi_intr_monitor: Fully register IRQ output signal
The IRQ signal goes to a asynchronous domain. In order to avoid glitches to
be observed in that domain make sure that the output signal is fully
registered.

This means that the IRQ signal is no longer mask when the control enable
bit is not set. Instead modify the code to clear the interrupt when the
control enable bit is not set. This turns it into a true reset for the
internal state.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-12-02 19:28:13 +01:00
Rejeesh Kutty 170c781d02 hdlmake.pl- updates 2016-12-01 13:52:11 -05:00
Rejeesh Kutty 95a2e02800 library/makefile- updates 2016-12-01 13:47:02 -05:00
Adrian Costina 6e89ac3d65 pzsdr2: ccusb_lvds, add flag_a,flag_b signals 2016-11-30 17:39:02 +02:00
Adrian Costina 0faa1ebff2 pzsdr1: ccusb_lvds, add flag_a,flag_b signals 2016-11-30 17:38:04 +02:00
Lars-Peter Clausen 84a76b9dea imageon: Invert HDMI TX clock
The ADV7511 samples the parallel data bus at the rising edge of sample
clock. Generate the clock so that the falling edge is aligned to updating
the bus data. This creates larger timing margins on each side of the
sampling edge and makes the design more robust.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 15:43:24 +01:00
Lars-Peter Clausen 24cc8d284b imageon: Increase RX DMA FIFO size
Increase the RX DMA FIFO to be able to better compensate for momentarily
memory bus contention. This has shown to resolve occasional overflows that
would occur under high system memory load.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
Lars-Peter Clausen 99dae73d96 imageon: Connect hdmi_rx_core output clock to DMA
Connect the HDMI RX core output clock to the DMA rather than connecting the
HDMI RX input clock directly. This will allow the HDMI RX core to modify
the clock and e.g. insert clock buffers or similar.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
Lars-Peter Clausen 07217740b5 imageon: Increase HDMI RX clock constraint
The ADV7611 is rated for a maximum clock rate of 165MHz. Increase the clock rate constraint to match this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
Adrian Costina 284fbac571 usdrx1: Xcvr updates, so that the channel parameters are correctly configured from boot time 2016-11-28 14:16:07 +02:00
Adrian Costina 45fd4f806d fmcjesdadc1: Fixed RX_PMA_CFG parameter 2016-11-25 16:33:58 +02:00
Adrian Costina 609b01f9e4 util_clkdiv: Added division by 2 option 2016-11-24 16:01:37 +02:00
Adrian Costina 91ee4394e4 axi_intr_monitor: Initial commit 2016-11-24 15:19:36 +02:00
Istvan Csomortani f03675cdab axi_dmac: ID_WIDTH must be clog2(FIFO_SIZE*2) 2016-11-24 13:20:45 +02:00