b83299c606
ad9467_kc705: Fix interrupts
2014-12-09 11:48:46 +02:00
6aad2fbbb2
axi_hdmi_tx: Fixed typo in altera related core
2014-12-09 10:19:03 +02:00
6f8c259961
axi_hdmi_tx: Fixed typo in altera related core
2014-12-09 09:56:14 +02:00
1b4a4bc06e
daq3: compilation fixes - latest changes
2014-12-08 14:51:52 -05:00
c0d588ba8c
daq3: compilation fixes - latest changes
2014-12-08 14:51:52 -05:00
26d72d306e
daq3: compilation fixes - latest changes
2014-12-08 14:51:51 -05:00
abff7097f6
daq3: compilation fixes - latest changes
2014-12-08 14:50:03 -05:00
8a72a6a0dc
daq3: compilation fixes - latest changes
2014-12-08 14:49:52 -05:00
7c3ed75b79
daq3: compilation fixes - latest changes
2014-12-08 14:49:40 -05:00
40287f4d97
remove fmcadc3
2014-12-08 14:39:43 -05:00
b6b5759662
Merge branch 'hdl_2014_r2'
...
Conflicts:
library/axi_ad9234/axi_ad9234.v
library/axi_ad9234/axi_ad9234_channel.v
library/axi_ad9234/axi_ad9234_constr.xdc
library/axi_ad9234/axi_ad9234_if.v
library/axi_ad9234/axi_ad9234_ip.tcl
library/axi_ad9234/axi_ad9234_pnmon.v
library/axi_ad9434/axi_ad9434.v
library/axi_ad9434/axi_ad9434_core.v
projects/ad9434_fmc/common/ad9434_bd.tcl
projects/ad9467_fmc/common/ad9467_bd.tcl
projects/common/kc705/kc705_system_bd.tcl
projects/common/kcu105/kcu105_system_bd.tcl
projects/common/mitx045/mitx045_system_bd.tcl
projects/common/vc707/vc707_system_bd.tcl
projects/common/zc706/zc706_system_bd.tcl
projects/daq1/common/daq1_bd.tcl
projects/daq1/zc706/system_top.v
projects/fmcomms1/ac701/system_top.v
projects/fmcomms1/common/fmcomms1_bd.tcl
projects/fmcomms2/ac701/system_constr.xdc
projects/fmcomms2/common/fmcomms2_bd.tcl
projects/fmcomms2/zc702/system_constr.xdc
projects/usdrx1/common/usdrx1_bd.tcl
2014-12-08 14:25:00 -05:00
0a8fabe874
Merge branch 'hdl_2014_r2' into dev
...
Conflicts:
projects/fmcadc5/common/fmcadc5_bd.tcl
projects/motcon1_fmc/common/motcon1_fmc_bd.tcl
projects/motcon1_fmc/zed/system_constr.xdc
projects/motcon1_fmc/zed/system_top.v
2014-12-08 11:32:13 -05:00
82b9ebe23d
remove replaced projects
2014-12-08 10:45:12 -05:00
19e4950b72
renamed to match official names
2014-12-08 10:44:15 -05:00
a558d4000d
motcon1_fmc: Added XADC to the project, the external muxing is controlled by generic GPIO, not XADC GPIO
2014-12-08 11:27:47 +02:00
d5572eaa49
ad9265_fmc: Fix unconnected DMA irq
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-12-05 17:44:47 +01:00
84174460bb
projects/common/kcu105/kcu105_system_bd: Restore axi_ethernet SupportLevel 0
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:50:45 +01:00
bb6cc40902
projects/common: KCU105 VC707 update and sync axi_ethernet:6.1 features
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:50:45 +01:00
8e4d0a1b60
projects/common: KCU105 VC707 KC705 sync microblaze core defaults
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:50:45 +01:00
7e18162632
projects/common/kcu105/kcu105_system_bd: Restore axi_ethernet SupportLevel 0
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-05 14:48:37 +01:00
e6e9c0058d
motor_control: Updated project to Vivado 14.2. Temporary removed XADC
...
- fixed constraints
- updated interrupt system
- used ad_iobuf
- The XADC was removed because the XADC IPI generates vaux inputs 0 and 10 even if 0 and 8 are selected
2014-12-05 11:53:23 +02:00
a70d27c094
axi_mc_speed: updated core to latest axi interface implementation
2014-12-05 11:53:11 +02:00
26f58914e2
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:53:06 +02:00
7e8e1e4fd0
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:52:59 +02:00
4c05e8de5d
motor_control: Updated project to Vivado 14.2. Temporary removed XADC
...
- fixed constraints
- updated interrupt system
- used ad_iobuf
- The XADC was removed because the XADC IPI generates vaux inputs 0 and 10 even if 0 and 8 are selected
2014-12-05 11:48:00 +02:00
ea1a50c985
axi_mc_speed: updated core to latest axi interface implementation
2014-12-05 11:46:20 +02:00
0d2888a5a6
axi_mc_current_monitor: updated core to latest axi interface implementation
2014-12-05 11:45:37 +02:00
21591dc485
axi_mc_controller: updated core to latest axi interface implementation
2014-12-05 11:43:59 +02:00
11f41d1dff
zynq_plddr3: Fix PLDDR3's Reset Generator
...
Reset generator's external reset signal was active low, but the GT reset is active high, and both the DDR controller and FIFO2S were in reset.
Therefore the external reset active state is changed to active high. This setup in general is made by the tool automatically, in order to do it correctly, need to
set this two property of the reset generator.
2014-12-04 15:42:28 +02:00
34ffa15b12
zynq_plddr3: Fix PLDDR3's Reset Generator
...
Reset generator's external reset signal was active low, but the GT reset is active high, and both the DDR controller and FIFO2S were in reset.
Therefore the external reset active state is changed to active high. This setup in general is made by the tool automatically, in order to do it correctly, need to
set this two property of the reset generator.
2014-12-04 15:39:17 +02:00
58bc7c6886
fmcomms6: Add DMA overflow signal to ILA
...
This is useful for debugging DMA overflows.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 14:23:09 +01:00
a9c6148570
fmcomms6: Better cope with higher sample rates
...
There can be a rather high latency between the last byte of a burst has been send and the time the response for the burst is received. Running at high samplerates this can cause the internal DMA store and forward FIFO to fill up and subsequently stall the DMA pipeline and drop samples. To better cope with the situation double the size of the internal FIFO. Also increase the clock of the AXI bus to be able to accommodate a samplerate of 310MHz.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:56:59 +01:00
324c0528c2
fmcomms6: Better cope with higher sample rates
...
There can be a rather high latency between the last byte of a burst has been send and the time the response for the burst is received. Running at high samplerates this can cause the internal DMA store and forward FIFO to fill up and subsequently stall the DMA pipeline and drop samples. To better cope with the situation double the size of the internal FIFO. Also increase the clock of the AXI bus to be able to accommodate a samplerate of 310MHz.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:28:37 +01:00
46156b7ceb
fmcomms6: Add DMA overflow signal to ILA
...
This is useful for debugging DMA overflows.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-04 13:28:37 +01:00
3cc890e604
projects/common: KCU105 VC707 update and sync axi_ethernet:6.1 features
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-04 09:49:09 +01:00
2d8450abc4
Merge branch 'dev' of https://github.com/analogdevicesinc/hdl into dev
2014-12-04 09:47:46 +01:00
3bc9b25e96
projects/common: KCU105 VC707 KC705 sync microblaze core defaults
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-12-04 09:47:02 +01:00
56a8a54080
ad9625x2_fmc: Increase the dma fifo data depth
2014-12-03 12:13:08 +02:00
757c213165
ad9625x2_fmc: Integrate the dac spi interface into the SPI interface
2014-12-03 12:06:43 +02:00
48673fec6a
ad9625x2_fmc: Integrate the dac spi interface into the SPI interface
2014-12-03 12:01:47 +02:00
80d1314c5e
ad9625x2_fmc: Reverse "Add a separate SPI for the DAC interface"
2014-12-03 10:14:09 +02:00
d89ed56e10
ad9625x2_fmc: Increase the data depth of the dmafifo
2014-12-02 19:29:19 +02:00
0007054638
ad9625x2_fmc: Add a separate SPI for the DAC interface
...
DAC spi interface is controlled by an axi_spi core.
Modifications on GPIO layout: pwr_good is 12, vdither 13 and trig is 14.
2014-12-02 19:29:18 +02:00
2e611ca013
Merge branch 'hdl_2014_r2' into dev
2014-12-02 10:45:35 -05:00
805d52346c
fmcomms7: compilation fixes on plddr3
2014-12-02 10:39:01 -05:00
f01d1aae2d
fmcomms7: compilation fixes on plddr3
2014-12-02 10:38:44 -05:00
95e113e1a3
fmcomms6: Connect DMA directly to the HP port
...
The axi_dmac supports native AXI3, there is no need to add a interconnect
for protocol conversion between it and the HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
45fc7bb7e2
fmcomms6: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
5b68b79dec
ad9467_fmc: Set ila type to native
...
With version 4.0 ila defaults to the AXI monitor type, so explicitly
configure it for native.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
6197563506
up_axi: Fix up_raddr/up_waddr port width
...
Make sure that the port declaration width matches with the reg declaration
later on.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-12-01 13:45:45 +01:00
Istvan Csomortani
Adrian Costina
Rejeesh Kutty
Paul Cercueil
Michael Hennerich
Lars-Peter Clausen