zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,055 Commits
1 Branch
0 Tags
23 MiB
Commit Graph

22 Commits (9e5e7d6805002d076c7fe2793ecfe4d1b1ee9c20)

Author SHA1 Message Date
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters 
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
 2015-08-19 14:11:47 +03:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file 
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-06-26 11:07:10 +02:00
Lars-Peter Clausen 264dbfed35 common: rfsom: Add constraints for the eth1 rx clock 
Add clock rate constraints for the eth1 rx clock, otherwise the tools
assume the RX paths are unconstrained and creates a bitstream which
violates hold times which causes bit errors on the RX path.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-06-03 17:21:43 +02:00
Rejeesh Kutty 71b5004b25 projects- drp moved to up-clock domain 2015-06-01 14:57:59 -04:00
Rejeesh Kutty 81a20b4abb rfsom- apisys lb updates 2015-05-08 15:22:17 -04:00
Rejeesh Kutty 272148eee5 rfsom: sdio 50mhz 2015-04-23 15:30:50 -04:00
Lars-Peter Clausen f232a36141 common: Place HDMI interface registers into the IOB 
The paths from the HDMI interface registers to the IO pads are
unconstrained. This means the P&R can in theory put the register anywhere
which could lead to stability issues on the interface, depending on what
else is in the fabric. To get predictable delays for the register to IO pad
path place the register into the IOB section.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-04-23 14:33:47 +02:00
Rejeesh Kutty e25cfb9d9f rfsom: ddr configuration 2015-04-22 13:45:11 -04:00
Lars-Peter Clausen afea42f444 rfsom: Use interface connection for the I2S stream 
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-04-08 13:29:26 +02:00
Lars-Peter Clausen 7da59a435f common: rfsom: Use interface connection for the HDMI DMA stream 
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-04-08 13:29:25 +02:00
Rejeesh Kutty 0b00073ce5 rfsom: add ddr parameters 2015-04-03 13:42:27 -04:00
Rejeesh Kutty d72c525b46 rfsom: sd1 to sd0 changes 2015-03-19 09:34:14 -04:00
Rejeesh Kutty fb5966f9fd rfsom: sd1 to sd0 changes 2015-03-19 09:34:13 -04:00
Rejeesh Kutty 6cc8f142f1 rfsom: sd1 to sd0 changes 2015-03-19 09:34:12 -04:00
Rejeesh Kutty a68463d033 rfsom: board updates 2015-03-10 15:26:31 -04:00
Rejeesh Kutty e38356b243 rfsom: board updates 2015-03-10 15:26:24 -04:00
Rejeesh Kutty 383cf3b3a3 rfsom: schematic changes 2015-02-18 14:32:20 -05:00
Rejeesh Kutty d2e9b1fe03 rfsom: schematic changes 2015-02-18 14:32:04 -05:00
Rejeesh Kutty 996e1b7970 rfsom: constraint updates 2015-02-03 14:20:34 -05:00
Rejeesh Kutty 61ba4f4357 rfsom: updated to rfsom 2014-12-23 14:03:58 -05:00
Rejeesh Kutty 614dfcd93c rfsom: updated to rfsom 2014-12-23 14:03:57 -05:00
Rejeesh Kutty ee52602c89 rfsom: initial commit 2014-12-23 14:03:55 -05:00