Commit Graph

20 Commits (a026d444358e2f033a3eda0675d093f7c0899084)

Author SHA1 Message Date
Istvan Csomortani 9a2d2e8a02 version_upgrade: Update FMCADC4 to 2016.2 2016-09-13 15:04:11 +03:00
AndreiGrozav 679d471d75 Merge branch 'hdl_2016_r1' into dev
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
2016-04-19 18:05:50 +03:00
AndreiGrozav e8dd5f9788 fmcadc4: Updated common design to 2015.4 2016-03-15 15:27:25 +02:00
Adrian Costina 977d9d0624 Merge branch 'hdl_2015_r2' into dev
Conflicts:
	projects/daq1/common/daq1_spi.v
2016-03-02 13:52:15 +02:00
Adrian Costina 40fb68dfd5 ad9265, ad9434, ad9467, daq1, daq2, daq3, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1, fmcomms6, fmcomms7, usdrx1: updated common spi module so that spi streaming is possible 2016-03-02 13:39:37 +02:00
Rejeesh Kutty ea045a3f9a fmcadc4: change qpll to receive 2015-12-17 12:34:47 -05:00
Rejeesh Kutty b2d0f5c56e fmcadc4- use the same source/name for clocks 2015-10-23 14:32:35 -04:00
Istvan Csomortani 1604e88242 fmcadc4: Update project to the new JESD interface framework 2015-09-25 19:11:19 +03:00
Istvan Csomortani f4b432da08 fmcadc4: Update to 2015.2 2015-09-25 19:11:17 +03:00
Lars-Peter Clausen 7f5a22a75f fmcadc4: Drop explicit axi_dmac clock synchronicity configuration
The axi_dmac core is now capable of detecting whether its different parts
run in different clock domains or not. No need to configure it manually any
more.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-09-18 15:28:01 +02:00
Istvan Csomortani d52308f074 axi_dmac: Change parameter name 2D_TRANSFER
Parameter name can't start with numbers, 2D_TRANSFER was changed to DMA_2D_TRANSFER
2015-08-20 10:14:22 +03:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Adrian Costina c949482574 fmcadc4: Set explicit PCORE_ID for AD9680 2015-07-16 18:21:49 +03:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
Rejeesh Kutty 71b5004b25 projects- drp moved to up-clock domain 2015-06-01 14:57:59 -04:00
Rejeesh Kutty 0a6efaccca fmcadc4- ad9680 version 2015-05-11 13:55:02 -04:00
Rejeesh Kutty 1354836799 fmcadc4: 2014.4 updates 2015-03-19 16:33:14 -04:00
Rejeesh Kutty 7e0bfca0c6 fmcadc4: 2014.4 updates 2015-03-19 16:33:14 -04:00
Rejeesh Kutty 987257e3c3 fmcadc4: fifo updates 2014-12-09 10:43:01 -05:00
Rejeesh Kutty 19e4950b72 renamed to match official names 2014-12-08 10:44:15 -05:00