5d0e08d92e
common/vc707- 2016.2 version
2016-08-17 10:36:19 -04:00
73413366bc
daq2/all - warnings fix
2016-08-17 10:36:00 -04:00
0b6fbf2208
daq2/vc707- 2016.2 updates
2016-08-17 10:34:06 -04:00
ce1fed1ce6
dmafifo- adc/dac split
2016-08-16 12:54:39 -04:00
0694a5015d
kc705- 2016.2 version
2016-08-16 12:54:39 -04:00
8311098384
daq2/kc705- adxcvr changes
2016-08-16 12:54:39 -04:00
8464816c82
dmafifo-split to adc/dac
2016-08-16 12:54:39 -04:00
6a8ca8107a
common: Added common ad_dcfilter stub for altera.
2016-08-16 17:37:16 +03:00
eb55f600fb
adrv9371x: Initial commit
...
-need to fix dc filter module for AD9371 / altera
2016-08-16 15:50:46 +03:00
5c27ccd1fa
adrv9371x: Added common qsys tcl
2016-08-16 15:34:10 +03:00
4658686ae1
adrv9371x/a10soc: Misc changes for being able to run Linux
2016-08-16 11:56:25 +03:00
e754f0a46a
up_axi- writes dropped by delayed w-responses
2016-08-14 11:21:19 -04:00
39c1c83d00
adrv9371x/a10soc: Fix spi_csn assignment
2016-08-12 10:07:11 +03:00
0b0aa8e6c0
Makefile: Add MMU option to altera makefiles
2016-08-11 17:46:54 +03:00
5d93e542ed
daq2-kcu105: 2016.2 updates
2016-08-11 10:00:41 -04:00
16ad0f4379
kcu105- 2016.2 update
2016-08-11 10:00:41 -04:00
3427965cd2
adxcvr- add u-gth bufg
2016-08-11 10:00:41 -04:00
bb9cb86f34
adc/dac- fifo constraints
2016-08-11 10:00:41 -04:00
829e4155ca
modified transceiver configuration files
2016-08-10 14:59:38 -04:00
b8f4e1c0aa
updated 9680 hdl files(to resolve a critical warning)
2016-08-10 14:50:31 -04:00
285059aed0
kcu105: Don't use phy reset automation, as it's not supported for KCU105
2016-08-09 10:19:57 +03:00
452d4706d3
kcu105: Update base project to 2015.4.2
...
- change part to revision 1.1 of the board
2016-08-09 10:19:36 +03:00
c6f4def93d
altera- make mmu a make switch
2016-08-08 11:54:51 -04:00
ccf1c56b33
util_upack: Patch up the description of Altera IP
2016-08-08 16:39:56 +03:00
e9ac4a5a0e
util_rfifo: Patch up the description of Altera IP
2016-08-08 16:39:25 +03:00
0cd608a7e2
lib_refactoring: Update Make files
2016-08-08 16:38:38 +03:00
aad8c265bc
lib_refactoring: Fix path for CMOS sources
2016-08-08 15:07:54 +03:00
1d33d7d7ee
lib_refactoring: Move the CMOS interface modules to ~/library/xilinx/common
2016-08-08 15:07:42 +03:00
df36902713
lib_refactoring: Fix path of the IO macros
2016-08-08 15:07:19 +03:00
90ac7b7ac9
lib_refactoring: Move all Altera module to library/altera/common
...
Move all Altera modules to library/altera/common, delete the
deprecated wrapper files
2016-08-08 15:07:01 +03:00
cb9af99c5d
lib_refactoring: Add ad_mul.v for Altera
2016-08-08 15:06:48 +03:00
f784557895
lib_refactoring: IOBUF is a Xilinx macro, no need to use with Altera
2016-08-08 15:06:34 +03:00
b806fa3b42
lib_refactoring: Move all the Xilinx common modules to library/xilinx/common
2016-08-08 15:06:10 +03:00
8f61e11a70
pzsdr: ccpci: Add PCIe reset monitor
...
For reliable and correct operation it is vital that the FPGA is fully
configured and up and running before the PCIe host de-asserts the reset.
Add a small logic circuit that detects de-assertion of the reset signal
that can be used to verify that the reset de-assertion was seen by the
FPGA.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
91782989ad
pzsdr: ccpci: Set IO standard to LVCMOS33 for banks 12 and 13
...
The IO voltage for bank 12 and 13 is 3.3V on the PCIe carrier. Set the
IOSTANDARD of the pins on these banks accordingly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
418217dd10
pzsdr: Remove LED and button signals from PCIe carrier
...
Only the FMC carrier and the breakout board do have push buttons and LEDs.
They are not present on the PCIe carrier. So move the constraints to a
separate file that can be included by the projects that need them and
remove all LED and button related signals from the PCIe project.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
3cff0fa7dc
pzsdr: ccpci: Use PL SPI and GPIO peripherals
...
To be able to access the GPIO pins and the SPI port through the PCIe bridge
we need to use the PL SPI and GPIO controllers rather than the PS
controllers. Adjust the sytem_top.v accordingly so that the PL peripherals
are connected to the external pins.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:29:42 +02:00
5faf4c4976
cleanup: Don't need Makefiles specific to xilinx/altera libraries. Top Makefile covers them
2016-08-05 16:27:52 +03:00
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
cb23ba8bb7
make- script needs update
2016-08-04 14:17:04 -04:00
e42b4ea378
hdlmake- updates
2016-08-04 13:28:25 -04:00
2b7c976be5
xcvr- altera/xilinx split
2016-08-04 13:26:10 -04:00
ed9e92621c
daq2- spi+xcvr address conflict
2016-08-04 10:50:31 -04:00
cba53774ca
axi_dmac: Don't add CDC constraints when all clocks are synchronous
...
When all clocks are synchronous there are no synchronizers and the
constraint for the CDC registers can't find any cells which generates a
warning. To avoid this don't add CDC constraints when all the clocks are
synchronous.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-02 19:30:24 +02:00
999eccc134
daq3: Update A10GX project to Quartus 16.0
2016-08-01 16:19:43 +03:00
9a563de8ff
daq2: A10GX updated project to Quartus 16.0
...
- connected directly axi_ad9680 to xcvr_core, skipping axi_jesd_xcvr
2016-08-01 15:09:53 +03:00
52ae3ddd6c
a10gx: Updated common files to 16.0
2016-08-01 15:08:12 +03:00
aece3f5555
axi_ad9680: Update IP core
...
- added signals so that AD9680 can be connected to altera's xcvr core through an avalon streaming sink
- added DEVICE_TYPE parameter in _hw.tcl, set to 1 for altera
2016-08-01 15:05:30 +03:00
7ca8e10004
make: Update Make files
2016-08-01 14:24:48 +03:00
a0ae791395
hdl-vivado-2016.2: Update axi_jesd_gt
...
Infer AXI bus interfaces separately.
2016-08-01 13:53:18 +03:00
Rejeesh Kutty
Adrian Costina
dbogdan
Shrutika Redkar
Istvan Csomortani
Lars-Peter Clausen