a38339a3ec
fmcomms2/rfsom: Add GPIO control for the RF card
2015-07-14 13:12:54 +03:00
ba2029a6e8
fmcomms2/rfsom: Delete trailing whitespaces from system_constr.xdc
2015-07-14 13:12:53 +03:00
a2e7fb9491
daq2/a10gx: qsys signal tap version
2015-07-13 10:07:18 -04:00
825fddd034
transceiver split up outside qsys
2015-07-10 11:45:07 -04:00
8c0d74aa90
transceiver split up outside qsys
2015-07-10 11:44:42 -04:00
e40aac9ab6
transceiver split up outside qsys
2015-07-10 11:44:22 -04:00
897c31ebbf
imageon: moved spdif_rx to DMA3 to be compatible with both zc706 and zed
2015-07-09 10:58:54 +03:00
f1dd2435b4
signal tap removed
2015-07-08 15:47:31 -04:00
c9e73b023d
signal tap removed
2015-07-08 15:46:52 -04:00
f64df40a0a
signal tap removed
2015-07-08 15:47:50 -04:00
19bf05c740
signal tap removed
2015-07-08 15:47:48 -04:00
bbf1c5b803
transceiver core added/gpio removed
2015-07-07 15:30:38 -04:00
075b1e5424
daq2/a10gx: added axi_jesd_xcvr control
2015-07-07 10:22:36 -04:00
46fa91d5be
Makefile: Update Make files
2015-07-03 18:08:57 +03:00
8c98399c37
imageon_ZC706: Add axi_spdif_rx core to the design
2015-07-03 17:48:29 +03:00
27b786e92f
imageon_loopback: Use BUFIO for the HDMI clock buffer
...
Since we are just doing a loopback all the logic is contained within the
IO bank. By using a BUFIO instead of a BUFG we avoid having to route the
clock signal from the IO bank to the middle of the FPGA and back to the IO
bank. This reduces the skew between clock and the data signals and makes
sure that the we can use the same design over a range of different
resolutions without having to calibrate the delay.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-03 15:07:17 +02:00
02b5ce82ad
imageon_loopback: Invert transmit clock
...
The ADV7511 samples on the rising edge. Update the data on the falling
edge, this gives us a larger margin and improved signal stability.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-03 15:07:17 +02:00
281cab091c
imageon_loopback: Create a clock for hdmi_rx_clock
...
Create a clock for the HDMI clock to make sure that the timing paths are
properly constraint.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-03 15:07:17 +02:00
95500d4022
fmcomms2_rfsom: Fix GPIO connections
2015-07-03 13:03:19 +03:00
eb3a0c179b
imageon: Put HDMI input/output FF into the IOB
...
This gives us predictable delays as well as very small skew between the induvidual data lines.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-07-02 18:33:32 +02:00
e269fe1dd0
Revert "imageon: Connect raw data to ILA"
...
This reverts commit 9e4fb2d048
2015-07-02 18:33:32 +02:00
18e8914087
fmcjesdadc1/a5gt: pn-errors version
2015-07-01 13:43:12 -04:00
35aca98b5f
fmcjesdadc1/stap: added
2015-07-01 13:43:10 -04:00
0102e3e02c
fmcomms2_ALL: Preserve backward compatibility for ENABLE/TXNRX control
...
By default the ENABLE/TXNRX pins are controlled by GPIOs, if the TDD module is enabled, the TDD FSM will take over the control of these two pins.
2015-07-01 13:54:01 +03:00
9e4fb2d048
imageon: Connect raw data to ILA
...
Connect the raw HDMI data as generated by the ADV7604 to the ILA. For
debugging it is quite useful to be able to compare the data before and
after conversion pipeline.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-30 18:03:03 +02:00
e429cb3f5c
imageon: Increase ILA buffer size
...
2048 samples is not even enough for one 1080p line. Increase it to 4096.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-30 18:02:44 +02:00
bcd12c8ead
imageon: Fix HDMI RX DMA data ILA probe width
...
The DMA data output of the HDMI RX core is 64-bit wide.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-30 18:02:44 +02:00
330c205e8e
fmcjesdadc1- sys_clk changes
2015-06-30 10:47:21 -04:00
6bc24e25eb
stap- need to be qsys
2015-06-29 13:26:32 -04:00
d25e02d7ee
stap- need to be qsys
2015-06-29 13:26:20 -04:00
aef6f6b20b
imageon: Hdmi_iic_rstn is accessible through a GPIO.
...
Connect hdmi_iic_rstn to GPIO[33]
2015-06-29 10:48:57 +03:00
6862655b0d
Add .gitattributes file
...
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
543e08b67a
fmcadc1: sdc updates
2015-06-25 04:25:39 -04:00
15740a7d34
fmcjesdadc1- 15.0 updates
2015-06-24 05:31:09 -04:00
714d415804
daq2/a10gx- signaltap changes
2015-06-19 14:33:04 -04:00
51e6a74a3d
daq2/a10gx- add xmit swap
2015-06-19 14:32:59 -04:00
d6b1260678
daq2/a10gx- signal tap + gpio
2015-06-19 14:32:58 -04:00
67df6b3ea8
a10gx- disable lab cell on dsp input register
2015-06-19 14:32:54 -04:00
db76fe3298
tquest- generate the timing report file
2015-06-19 14:32:53 -04:00
c3ea99d1f8
fmcadc2: Fixed zc706 spi connection
2015-06-19 13:31:59 +03:00
301226c766
fmcjesdadc1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:47 +03:00
f01ba54c5f
fmcomms1: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:33 +03:00
009d33f0a0
ad9467: Fixed mdc_mdio connection for kc705
2015-06-18 11:06:20 +03:00
2e46bda916
motcon2_fmc: Update project to use the latest util_gmii_to_rgmii
2015-06-16 17:43:10 +03:00
8fc0e0e62d
fmcjesdadc1: Fixed vc707 ethernet connections
2015-06-16 16:27:09 +03:00
142f802f54
adv7511: Fixed vc707 ethernet connections
2015-06-16 16:26:58 +03:00
4c80013faf
projects/daq2: gt lane split
2015-06-12 15:56:03 -04:00
e6525136a9
daq2/common: axi_ad9144_fifo needs a proper reset sequence
...
Connect the axi_ad9144_fifo/dma_rst signal to sys_cpu_reset
2015-06-12 14:03:46 +03:00
f587aa42d9
a10gx- tx sync
2015-06-10 14:32:25 -04:00
e3e4af5c51
daq2/zc706: open ports
2015-06-10 14:25:58 -04:00
Istvan Csomortani
Rejeesh Kutty
Adrian Costina
Lars-Peter Clausen