a9d03af771
altera- serdes changes
2016-10-28 14:09:18 -04:00
f2e12cc88f
util_fir_dec: Shifted the output data to the left so that the amplitude remains
...
constant
2016-10-28 15:18:36 +03:00
d9b756e7ad
util_fir_int: Shifted the output data to the left so that the amplitude remains constant
2016-10-28 15:17:30 +03:00
30314e4492
library: Added util_fir_int and util_fir_dec interpolation/decimation filters
2016-10-27 19:31:50 +03:00
8107514dde
altera/common- ad_serdes_clk
2016-10-27 09:41:10 -04:00
f7e3703b98
axi_ad9371- avalon-s interfaces
2016-10-27 09:25:00 -04:00
6f611e0d10
altera/alt_serdes: Add support for Cyclone V
2016-10-25 20:32:51 +03:00
08cef5a745
axi_ad9361: Add Cyclone V SERDES support
2016-10-25 20:24:17 +03:00
5731ba3300
fmcomms11- xcvr updates
2016-10-24 09:51:40 -04:00
de0c487195
axi_ad9684: Add Altera support for the core
2016-10-24 11:43:22 +03:00
3f3606d318
axi_ad9122: Add Altera support for the core
2016-10-24 11:43:12 +03:00
aa46de5e5e
adi_ip_alt: Add ad_generate_module_inst proc
...
Add a tcl process, which can be used to generate custom module
names during the generation phase. This will be used to create
different ad_serdes_clk module, in case when independent IOPLLs are
needed for TX and RX.
2016-10-24 11:43:00 +03:00
707038937a
alt_serdes: Add additional parameters
...
Add additional parameters to keep the top of ad_serdes_* modules
consistant through differente carriers.
2016-10-24 11:42:43 +03:00
8dbfe9258f
axi_ad9162: Delete duplicated port
2016-10-21 13:47:01 +03:00
0beecea02d
util_adxcvr- ultrascale updates
2016-10-19 13:06:10 -04:00
72c05e8635
axi_dmac: Fix constraints for ultrascale
...
Replace "PRIMITIVE_SUBGROUP == flop" with "IS_SEQUENTIAL" as the former is
series7 specific while the later works on all platforms. This fixes the
axi_dmac timing constraints for ultrascale based platforms.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-10-19 14:00:54 +02:00
ecc0addb8c
scripts/adi_ip_alt.tcl: Script is case insensitive for its arguments
2016-10-18 11:25:06 +03:00
bf949f1a88
axi_xcvrlb- xcvr updates
2016-10-17 16:16:57 -04:00
1b3fcb5863
util_adxcvr- parameter defaults
2016-10-17 16:10:57 -04:00
a026d44435
axi_generic_adc: Add missing up_adc_common connections
2016-10-12 13:20:26 +03:00
b543402051
axi_mc_current_monitor: Add missing up_axi connection
2016-10-12 13:20:26 +03:00
91995c082d
axi_ad9684: Fixed up_drp_*data width
2016-10-12 13:20:26 +03:00
a505d304af
Add up_dac_common missing connections
2016-10-12 13:20:26 +03:00
43ee917d53
Add up_dac_channel missing connections
2016-10-12 13:20:26 +03:00
1131be91ed
axi_ad9361: Makefile update
2016-10-11 23:34:13 +03:00
b7767aa18f
xilinx/axi_ad9361_lvds_if: Remove ila
2016-10-11 18:13:45 +03:00
2d93d787ab
altera/ad_cdfilter: Update interface to Verilog 2001 standard
2016-10-11 17:59:21 +03:00
369dad60b0
axi_ad9361: Add Altera SERDES interface support
2016-10-11 17:59:19 +03:00
ae47895666
altera/alt_serdes: Fixed SERDES 4 factor initialization
2016-10-11 17:59:17 +03:00
d41945f568
altera/ad_serdes: Add support for any SERDES factor less than 8
2016-10-11 17:59:14 +03:00
52194f0fea
axi_ad9361: Add DRP connection to the interface module
2016-10-11 17:59:12 +03:00
7194d2eccc
axi_ad9361: Grup interfaces to add support for more carriers
2016-10-11 17:58:49 +03:00
cc6ca4f0f2
ad_lvds_in- ultrascale sim device
2016-10-10 10:39:47 -04:00
121b341b45
axi_spdif_rx: Fixed version register issue. Added sampled_data to sensitivity list
2016-10-10 17:30:13 +03:00
ff980551e6
ad_serdes: SERDES_FACTOR handover missing
...
In modules ad_serdes_in/ad_serdes_out the handover of the parameter
SERDES_FACTOR did not exist, causing unwanted behavioral in case of
factors less than 8.
SERDES_FACTOR must be hand over to DATA_WIDTH parameter of the SERDES
primitive.
2016-10-10 16:38:42 +03:00
f34aa67029
axi_hdmi: Fix a typo
2016-10-10 16:22:18 +03:00
15f36af4c2
axi_ad9152: Update core to support Altera platforms
2016-10-10 16:21:49 +03:00
111adac825
axi_usb_fx3: Updated core
...
- trig signal will reset state machine
- slrd_n delay will be absorbed by the axi_usb_fx3_if module, when Xilinx DMA is not ready to receive data during a packet
- fx32dma_eop signals when the FX3 DMA buffer should be empty. slrd_n set high and sloe_n set low for another two clock cycles
- eot_fx32dma signals the interface that the packet has been fully transfered. No need for watermark signals
- added length_fx32dma and length_dma2fx3 as requested
2016-10-10 10:33:37 +03:00
39fdf11ef3
util_adxcvr- rx/tx clocks
2016-10-05 13:53:02 -04:00
7ec93ce8e0
util_adxcvr: Fix some typo
...
GTHE4_CHANNEL is instantiated in case of XCVR_TYPE == 2
2016-10-05 17:42:12 +03:00
4f587d2e48
util_adxcvr: Delete trailing whitespaces
2016-10-05 17:41:40 +03:00
1b9d2d434c
axi_ad9361_tdd: Delete unused register
2016-10-05 17:41:08 +03:00
ddceff2b5c
axi_usb_fx3: Updated header/footer signature
2016-10-04 16:11:24 +03:00
48dd4880a3
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
0e8551545c
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
b4652650e4
util_adxcvr- xcvr_type parameter
2016-10-03 16:11:45 -04:00
63ddcf1e26
util_adxcvr- synthesis warnings fix
2016-10-03 16:11:45 -04:00
8e0dc859af
axi_usb_fx3: Update
...
- added 1 clock delay for slrd_n signal
- rearrange databytes
2016-10-03 15:17:01 +03:00
43b3761b80
axi_ad9361: Flop the tx and rx valid
2016-10-03 12:24:04 +03:00
8e25bc01b3
all: Change tab to double space
...
Occasional file parsing and restructuring become a pain, if tabs exists
in code. General rule of the repos is tab always a double space.
2016-10-01 18:13:42 +03:00
Rejeesh Kutty
Adrian Costina
AndreiGrozav
Istvan Csomortani
Lars-Peter Clausen