Commit Graph

8 Commits (aaae350b3defa5664ab1dd38041c3203d5a397e5)

Author SHA1 Message Date
Istvan Csomortani 9055774795 all: Update license for all hdl source files
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.

New license looks as follows:

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.

Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
 (at the option of the user):

  1. The GNU General Public License version 2 as published by the
     Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html

OR

  2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
Lars-Peter Clausen b24f93a8bd axi_logic_analyzer: Reduce AXI address width
The axi_logic_analyzer does not use the full width of the AXI interface
address. It only responds to register access in the first 32 registers.

Reduce the size of the AXI address to 7 bit accordingly. This allows the
scripts to correctly infer the internal register map size which will cause
the interconnect to filter out access to these unused register.

This slightly reduces utilization by getting rid of some pipeline
registers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:40 +02:00
Lars-Peter Clausen 77399ec7aa axi_logic_analyzer: Add missing reset wire declaration
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-18 12:17:40 +02:00
Adrian Costina 8ba86cb75c axi_logic_analyzer: Allow changing data pins direction to output only after data is available from the DMA or if the output is set from a register for that specific pin 2017-04-18 12:17:40 +02:00
Adrian Costina 8476d9d59a axi_logic_analyzer: Allow only data[0] to be used as alternative clock.
- drive all logic on clk_out instead of clk
2017-04-18 12:17:39 +02:00
Adrian Costina d7edd71aef axi_logic_analyzer: Triggering changes on valid data 2017-03-14 15:25:00 +02:00
Adrian Costina 37a1c98c12 axi_logic_analyzer: Switched from BUFGMUX to BUFGMUX_CTRL for glitch free clock switching 2017-02-27 14:19:54 +02:00
Adrian Costina 6604cc7322 axi_logic_analyzer: Initial commit 2017-01-31 16:23:56 +02:00