Commit Graph

13 Commits (ab4ea30f6b98b97dac336dda11aefceb79350a78)

Author SHA1 Message Date
Iulia Moldovan 68461110aa Replace link in license header from master to main
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2024-01-16 16:48:45 +02:00
PopPaul2021 86836f5a40 library/common: Added DAC custom read/write interface in up_dac_common.
The DAC common regmap was updated with 3 registers(rd/wr/ctrl) and 1 interface status flag for converters with custom control interface.
2023-10-02 11:07:08 +03:00
Iulia Moldovan 28c06d505f Add/edit copyright and license for .v, .sv files
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-11 15:17:41 +03:00
Iulia Moldovan 0c0617d49e libraries: Update modules according to guideline
* Added header license for the files that didn't have
* Modified parentheses
* Removed extra spaces at the end of lines
* Fixed parameters list to be each parameter on its line
* Deleted lines after endmodule and consecutive empty lines
* Fixed indentation

Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-06-28 18:06:56 +03:00
AndreiGrozav c2d960e029 axi_adrv9001: Add external sync support
The external sync must be synchronous to the reference clock, in order
to obtain a deterministic synchronization of the interface.
2021-12-16 15:16:30 +02:00
alin724 f8c82c611d axi_adrv9001: Add support for symbol operation mode on Xilinx devices
Add CMOS support for the interface for the following symbol modes on Xilinx devices:

A              B  C       D                     E       F      G            H
CSSI__1-lane   1  16/8    80(SDR)/160(DDR)      80      -      SDR/DDR      SDR/DDR->4/2(C=16), 2/1(C=8)

Columns description:
A - SSI Modes
B - Data Lanes Per Channel
C - Serialization factor Per data lane
D - Max data lane rate(MHz)
E - Max Clock rate (MHz)
F - Max Sample Rate for I/Q (MHz)
G - Data Type
H - DDS Rate

CSSI - CMOS Source Synchronous Interface
2021-08-17 15:33:06 +03:00
Laszlo Nagy 32dbde6945 axi_adrv9001: Allow running Rx2/Tx2 channels in R1 mode without Rx1/Tx1
This commit removes the deadlock created while trying to use the Rx2/Tx2
channels without the Rx1/Tx1 channels enabled first.
2021-05-26 15:44:45 +03:00
Laszlo Nagy 08b0d19731 axi_adrv9001: Populate correct ratio of the SSI interface and user interface clocks
Depending on FPGA technology the physical layer uses different
deserialization factors and corresponding clock division factors to
divide the source synchronous interface clock. This must be
exposed to software so it can act on it while setting the DDS rate.

Xilinx CMOS clock ratio - 4
Xilinx LVDS clock ratio - 4
Intel  CMOS clock ratio - 1
2021-05-26 15:44:45 +03:00
Laszlo Nagy c718ba91f1 axi_adrv9001: Add status bit for Tx clocking
If Tx source synchronous clock is not routed through clock capable pins
the interface and driving logic must run on the Rx interface clock.
This introduces a dependency, Rx interface must be bring up before the
Tx. In this mode a Tx only operation is not possible.

This is done through a synthesis parameter.
Expose this parameter to the software so it can query if the limitations
exists in the implementation.
2021-03-17 16:34:12 +02:00
Laszlo Nagy 50c4c3e815 axi_adrv9001: Fix channel 3 for Tx1 in DMA mode 2021-03-04 11:13:10 +02:00
Laszlo Nagy 714d557245 axi_adrv9001: Add opt-in synthesis parameters 2021-01-26 15:22:41 +02:00
Laszlo Nagy afa3f11206 axi_adrv9001: Add TDD support 2021-01-20 13:00:01 +02:00
Laszlo Nagy 64f6762a05 library:axi_adrv9001: Initial version
ADRV9001 interfacing IP supports the following modes on Xilinx devices:

A              B  C       D       E       F      G        H
CSSI__1-lane   1  32      80      80      2.5    SDR      8
CSSI__1-lane   1  32      160     80      5      DDR      4
CSSI__4-lane   4  8       80      80      10     SDR      2
CSSI__4-lane   4  8       160     80      20     DDR      1
LSSI__1-lane   1  32      983.04  491.52  30.72  DDR      4
LSSI__2-lane   2  16      983.04  491.52  61.44  DDR      2

Columns description:
A - SSI Modes
B - Data Lanes Per Channel
C - Serialization factor Per data lane
D - Max data lane rate(MHz)
E - Max Clock rate (MHz)
F - Max Sample Rate for I/Q (MHz)
G - Data Type
H - DDS Rate

CSSI - CMOS Source Synchronous Interface
LSSI - LVDS Source Synchronous Interface

Intel devices supports only CSSI modes.
2020-08-24 17:49:12 +03:00