8464816c82
dmafifo-split to adc/dac
2016-08-16 12:54:39 -04:00
4658686ae1
adrv9371x/a10soc: Misc changes for being able to run Linux
2016-08-16 11:56:25 +03:00
0b0aa8e6c0
Makefile: Add MMU option to altera makefiles
2016-08-11 17:46:54 +03:00
16ad0f4379
kcu105- 2016.2 update
2016-08-11 10:00:41 -04:00
285059aed0
kcu105: Don't use phy reset automation, as it's not supported for KCU105
2016-08-09 10:19:57 +03:00
452d4706d3
kcu105: Update base project to 2015.4.2
...
- change part to revision 1.1 of the board
2016-08-09 10:19:36 +03:00
c6f4def93d
altera- make mmu a make switch
2016-08-08 11:54:51 -04:00
418217dd10
pzsdr: Remove LED and button signals from PCIe carrier
...
Only the FMC carrier and the breakout board do have push buttons and LEDs.
They are not present on the PCIe carrier. So move the constraints to a
separate file that can be included by the projects that need them and
remove all LED and button related signals from the PCIe project.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
52ae3ddd6c
a10gx: Updated common files to 16.0
2016-08-01 15:08:12 +03:00
9952a94efb
hdl-vivado-2016.2- ip version updates
2016-07-28 13:44:57 -04:00
62c7114d77
Enable bitstream compression for Xilinx projects
...
Enabling bitstream compression reduces the size of the generated bitstream.
This means on one hand it will consume less storage, which is especially
useful for the BOOT partition of the ADI images where we store BOOT.BIN
files for all supported platforms.
On the other hand a smaller bitstream is faster to load from the storage
medium and it is also faster to program to the FPGA. So it reduces the
overall boot time as well.
The only downside of bitstream compression is that the bitstream size is no
longer constant, but depends on the actual design and resource utilization.
This will not work with bootloaders that expect a fixed size.
When building a bitstream using the tcl scripts bitstream compression can
be disabled by setting the ADI_NO_BITSTREAM_COMPRESSION environment
variable.
Initial tests show a reduction of a round 50% in size for most ADI
projects.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 10:16:15 +02:00
c6c3622816
a10gx: Updated common design adding explicit clock frequency and synchronous reset deassertion
2016-06-30 10:59:29 +03:00
2e80dec513
adrv9371x/zc706: Update project with the new axi_dacfifo
2016-06-22 12:33:47 +03:00
eaf4d4a19d
makefile updates
2016-06-10 14:26:14 -04:00
625052f46e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
d53b06849e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
3516ec28b7
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
d10dd78094
kcu105: Update common design to 2015.4
2016-05-27 14:59:28 +03:00
d0b40afb45
zc706/common: Fix PL_DDR3 fifo integration script
2016-05-27 14:13:55 +03:00
aca3038919
axi_dacfifo: No overflow for DAC
2016-05-27 14:13:55 +03:00
81ade7f26c
axi_dacfifo: Fix resets
...
DMA side: axi_resetn is used to reset the address counters
DAC side: GT tx_rst is used to reset the last_address register
2016-05-27 14:13:55 +03:00
578376c8fe
axi_dacfifo: Add bypass logic
2016-05-27 14:13:55 +03:00
39d23032f1
daq2- qsys updates
2016-05-23 10:55:44 -04:00
72151bb1a6
a10gx: Updated base design to include MMU
2016-05-13 18:44:41 +03:00
f3f5353944
zcu102- updates
2016-05-10 15:40:41 -04:00
e8fbdd0f5d
zcu102: zynq ultrascale
2016-05-10 15:40:41 -04:00
89b20f2a35
c5soc- remove unused hps ports
2016-05-09 13:54:08 -04:00
4863a04132
axi_adc/dacfifo: Split the intergration script file
...
Split the integration script file into two separate script files. Rename the
integration processes names to be more meaningful.
2016-05-05 09:53:55 +03:00
92dcce1674
a10soc: default ports
2016-05-04 13:42:12 -04:00
e790e4c3ae
a10soc- complete qsys
2016-04-25 12:56:19 -04:00
d36d1263c5
a10soc- updates
2016-04-25 10:50:09 -04:00
82c4f75f13
a10soc- a10gx copy
2016-04-22 10:39:21 -04:00
8b2542b181
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:01:12 -04:00
679d471d75
Merge branch 'hdl_2016_r1' into dev
...
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
2016-04-19 18:05:50 +03:00
8a574cd8ba
zc706_system_plddr3.tcl : Add integration process for the AXI_DAC_FIFO
2016-04-19 11:30:52 +03:00
736bbdd95a
pzsdr1- io updates
2016-04-11 16:12:21 -04:00
8a5a5082f3
pzsdr1- io updates
2016-04-11 16:12:09 -04:00
8e689f4594
pzsdr1- lvds/cmos constraints
2016-04-11 16:00:18 -04:00
68bc647472
pzsdr1- ddr board delays update
2016-04-06 15:30:27 -04:00
255b0ebd40
util_dacfifo: Add dac_xfer_out control
...
The dac_xfer_out control signal is asserted while the DAC reads back data. Should be connected to upack/dma_xfer_in.
2016-03-29 16:50:00 +03:00
657144d9a7
a10gx: Updated base design and DAQ2 to the new revision of the a10gx board
...
- tried using ATX PLL and fPLL for TX transceiver clocks, but could not get them to lock
- CMU PLL works correctly as temporary solution
2016-03-28 13:21:36 +03:00
373481360b
util_dacfifo: Add a bypass option to the FIFO
2016-03-21 14:14:43 +02:00
b555be25d5
kcu105: Update common design to 2015.4
2016-03-18 15:22:42 +02:00
6f03998b95
zc702: Updated common design to 2015.4
2016-03-15 15:21:22 +02:00
a0c5f46940
zed: Updated common design to 2015.4
2016-03-15 15:20:46 +02:00
9a258d5e4c
vc707: Updated common design to 2015.4
2016-03-15 15:20:02 +02:00
bcf5bd8137
mitx045: Updated common design to 2015.4
2016-03-15 15:18:31 +02:00
27f5f1dcbe
kc705: Updated common design to 2015.4
2016-03-15 15:17:53 +02:00
eb743e0e03
ac701: Updated common design to 2015.4
2016-03-15 15:17:02 +02:00
d282064103
zc706: Updated common design to 2015.4
2016-03-15 15:16:36 +02:00
561412e322
pzsdr-cmos swap
2016-03-11 11:25:58 -05:00
18f30c8dc8
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
a2374f64bf
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
e012d0519b
Merge remote-tracking branch 'origin/hdl_2015_r2' into dev
2016-02-26 13:39:39 -05:00
f6e64e42b0
kcu105: add ethernet idelaycntrl
2016-02-26 13:19:49 -05:00
377461e0d4
Merge branch 'hdl_2015_r2' into dev
2016-02-19 14:15:27 +02:00
0f37dd6424
fmcjesdadc1: Fixed project
...
- changed system_project.tcl so that all base designs to be included
- changed DMA properties to take into consideration the new parameter names
- changed reset bridges to asynchronous
- increased maximum burst size of the DMA bridge
- changed the data_width of the memory bus to 256, as with 512 timing violations may occur
- changed base addresses for the base system to be the same as in the previous release
2016-02-19 14:09:57 +02:00
43e03ca6f7
arradio: Updated project
...
- made the reset bridges asynchronous
- connected the arradio gpio to the CPU interconnect
2016-02-16 14:50:23 +02:00
ad9ecbbbb6
daq2: Updated a10gx project to quartus 15.1.1
2016-02-05 17:43:05 +02:00
b147e9c94a
pzsdr1- updates
2016-02-02 12:33:01 -05:00
170295161f
pzsdr1- xdc
2016-01-26 11:19:00 -05:00
44a382fc69
pzsdr1-added
2016-01-25 15:33:34 -05:00
d2b26720e6
common: microzed: Add clock, reset and interrupt support
...
In order for the base project to be usable by other projects it needs to
create the clock, reset and interrupt signals that are expected to exist.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
426490c394
common: Rename uzed to microzed
...
Everybody calls the MicroZed microzed in their projects. Don't deviate from
that to avoid potential confusion.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:18:57 +01:00
c397787001
uzed: updates
2016-01-11 15:36:01 -05:00
a610ebb413
uzed: zed-copy
2016-01-11 13:53:22 -05:00
650d426301
a10gx/base: set gpio to 32
2015-12-11 10:14:37 -05:00
f1b6577447
a10gx/base: separate gpio in/out
2015-12-10 16:04:54 -05:00
a0e67aad56
c5soc: Updated common design
2015-11-24 13:22:01 +02:00
597e9eae84
pzsdr: added ad9361 clock out
2015-11-16 15:53:29 -05:00
83399ef6ee
a10gx: Updated common project to work with Linux (enabled MMU)
2015-11-04 13:35:52 +02:00
9d2b8809df
Makefiles: Updated Makefiles
2015-10-23 10:44:27 +03:00
14bccb6062
pzsdr/ccfmc- rf card/tdd only on fmc
2015-09-22 15:54:53 -04:00
25f3f05c22
pzsdr- breakout + fmc updates
2015-09-18 15:33:50 -04:00
caec400378
pzsdr- make module default
2015-09-18 13:22:01 -04:00
236854c26f
pzsdr-cc-fmc updates
2015-09-18 12:46:42 -04:00
3ef94d559c
rfsom renamed to pzsdr
2015-09-18 11:18:59 -04:00
52d3f189a0
rfsom renamed to pzsdr
2015-09-18 11:18:01 -04:00
0021c7869d
kc705: Deactivated narrow burst support, as it's not needed
2015-09-16 19:02:17 +03:00
d81d8238a9
kc705: Updated mig project file
2015-09-08 16:42:23 +03:00
01c0fdc809
daq2/a10gx- ethernet fix
2015-09-02 14:31:15 -04:00
1ecd615f92
common/mitx045 : Fix the vdma interface of axi_hdmi_core
2015-09-02 16:33:30 +03:00
a67ae238f8
rfsom-ps7- ddr settings
2015-08-31 15:39:45 -04:00
212235189f
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
0e20277bc1
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
93fe70790d
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
810fced1ec
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
6e90ba24e4
rfsom- add rgmii iodelay constraints
2015-08-27 16:26:17 -04:00
3953ab5e22
rfsom- rgmii upgrade
2015-08-27 11:41:55 -04:00
74a6e33f2d
kcu105: 2015.2.1 updates
2015-08-25 09:12:36 -04:00
4eb28592c8
kcu105: 2015.2.1 updates
2015-08-25 09:12:32 -04:00
77e2eb7364
projects/common: Fix parameter name for xilinx core axi_gpio
...
Parameter C_GPDATA_WIDTH is changed to C_GPIO_WIDTH.
2015-08-25 10:07:11 +03:00
d3e090da3d
projects/common: Upgrade Xilinx's IP cores
...
To update the projects to Vivado 2015.2 the following IP cores were upgraded:
+ microblaze 9.4 to microblaze 9.5
+ axi_ethernet 6.2 to 7.0
+ mig 6.1 to 7.0
2015-08-25 10:03:49 +03:00
203d7cb470
projects/common: Cosmetic changes.
2015-08-25 09:58:32 +03:00
f08305c979
adv7511_ac701: Fix axi_ethernet core's port connections
2015-08-25 09:54:19 +03:00
af8a48d90e
projects: Fix broken parameters at the common block designs.
...
Fix parameter names for axi_spdif_tx and axi_i2s_adi core instantiations.
2015-08-25 09:25:24 +03:00
e760aa424a
daq2/a10gx-- intmem to ddr
2015-08-19 13:26:38 -04:00
8cc3aa0865
ddr- 933/233
2015-08-19 13:26:38 -04:00
57cfb7cfb1
hdl/library: Update the IP parameters
...
The following IP parameters were renamed:
PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Rejeesh Kutty
dbogdan
Adrian Costina
Lars-Peter Clausen
Shrutika Redkar
Istvan Csomortani
AndreiGrozav