39e073e6bf
adrv9371x: Use the output of IBUFDS_GTE2 as reference for the clock gens
...
In some cases (GTX2) the transceiver may gate the out_clk when it is in
reset. This will stop the clock generators from getting a clock prior
removing the reset of the XCVR. The XCVR has a requirement of running
user clock while removing the reset. The correct sequence must be :
Enable device clocks (user clock)
Remove the reset from the XCVR
2022-02-15 11:09:37 +02:00
86d754ae85
projects/scripts: Add gtwizard scripts
2022-02-14 10:32:58 +02:00
62dc310794
Revert "intel: Update projects to use ad_iobuf instead of ALT_IOBUF"
...
This reverts commit a3a610728c
2022-02-09 17:39:29 +02:00
4790d334ad
dac_fmc_ebz: NUM_LINKS added to system_top.v
2022-02-09 12:23:12 +02:00
7702079af5
ad_quadmxfe1_ebz: Fix external sync for ADC path
2022-02-08 16:56:01 +02:00
3ff2887485
dac_fmc_ebz_vcu118: Initial commit
2022-02-08 14:34:47 +02:00
694ebbfbfc
dac_fmc_ebz_bd.tcl: Updated bd for multiple tx_ref_clk
2022-02-08 14:34:17 +02:00
45dae0f3d3
ad9081_fmca_ebz/common: Connect sync at TPL level
...
Reset CPACK from ADC TPL so during armed capture clear the cpack to avoid
capturing old samples.
Reset UNPACK with TPL to clear upack during armed transfers to avoid
sending old data.
2022-02-07 19:14:01 +02:00
8ec657315c
adrv9009zu11eg: Drive cpack/upack reset from TPL
2022-02-07 19:14:01 +02:00
d949936a1b
adrv9009zu11eg/common: EXT_SYNC updates
...
- Explicitly enable EXT_SYNC parameter for Rx/Obs
- Loopback manual sync for each TPL (we do not combine them yet because
it requires extra CDC logic)
2022-02-07 19:14:01 +02:00
63a1233101
ad7134_fmc: Update Readme
2022-02-07 14:41:25 +02:00
4827e5eb18
ad7134_fmc: Switch offload trigger to falling ODR
2022-02-07 14:41:25 +02:00
297bed6721
ad7134_fmc: Change ODR signal to output
...
FPGA is now generating the ODR signal using axi_pwm_gen.
Both ADCs are now in slave mode.
2022-02-07 14:41:25 +02:00
b63ebca292
projects/cn0506_rmii/*: Add util_mii_to_rmii library to project
2022-02-03 10:23:12 +02:00
3da9d9fcb4
pluto_ng: Initial commit
2022-02-03 09:56:13 +02:00
7dae0858b0
de10nano: changed quartus version to 20.1.1
2022-01-31 14:10:51 +02:00
bc5974d789
ad77681evb: Fix irq overlap
...
spi engine irq signal was overwriting fmc iic irq
2022-01-31 12:32:31 +02:00
f34b561e19
daq3: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line for the Xilinx FPGAs in the project.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-31 10:47:01 +02:00
e8ff32d6df
ad6676evb: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line for the Xilinx FPGAs in the project.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-31 10:36:31 +02:00
318523579f
ad6676evb: Update to JESD204 TPL instantiation
...
Updated the JESD204 TPL instantation of the design.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-31 10:36:31 +02:00
9ca5ae07b2
ad9783: Add Readme.md
2022-01-25 17:16:30 +02:00
530aca9754
daq2: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line for the Xilinx FPGAs in the project.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-20 12:54:03 +02:00
f3cf7508c8
ad9783: Update Makefile
2022-01-20 12:31:57 +02:00
4ec8797c7c
adrv9009: Parameterize JESD204 configuration values
2022-01-13 10:15:05 +02:00
6a92bd5925
adrv9371x: Parameterize JESD204 configuration values
2022-01-12 16:05:48 +02:00
d8a418d8d0
projects/scripts/adi_board/tcl: Updated ad_xcvrcon procedure for parametrized projects
2022-01-12 16:05:18 +02:00
fc04198b2b
adrc9361_ccfmc: Fix SFP pin locations
2022-01-12 13:43:06 +02:00
86d2467f57
fmcjesdadc1: Parameterize JESD204 configuration values
...
Added the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2022-01-12 13:28:42 +02:00
3d000ee6a8
ad9783_zcu102_dev: Initial commit
2022-01-07 14:04:08 +02:00
6dddaaaa78
adrv9009zu11eg/adrv2crr_xmicrowave: Update Makefile
2021-12-22 11:33:15 +02:00
0d45f4dc94
xmicrowave: Fix typo
2021-12-17 15:44:23 +02:00
38c489d254
projects: set Quartus version for cyclone5, cn0506_mii and cn0506_rgmii
2021-12-15 17:13:38 +02:00
fb17147eb4
fmcadc2: Parameterize JESD204 configuration values
...
Add the capability to set the JESD204 configuration values from a single
point in the code and to modify these default settings from the command
line.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-12-10 20:54:39 +02:00
13a282d9c4
fmcadc2: Update JESD204 TPL instance
...
Updated the JESD204B transport layer instance to instantiate the new TPL IP
module.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-12-10 20:54:39 +02:00
77f3e5155b
ad9081_fmca_ebz: Fix signal length parameter
...
Corrected the length parameter for the rx_data input.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-12-08 14:29:48 +02:00
1b8ca5f045
fmcjesdadc1: bd: Clean trailing white spaces and alignment
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-12-03 16:10:51 +02:00
8e226282cd
fmcjesdadc1: bd: Replace hardcoded lane number with parameter
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-12-03 16:10:51 +02:00
80b3fc2d0a
ad9081_fmca_ebz: versal: Remove unused GT reset input pin
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-22 16:18:29 +02:00
1ec0993d33
ad9081_fmca_ebz/vcu128: Remove ref clock replica
...
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-22 16:18:29 +02:00
2a740d0c2b
ad7616_sdz: Add make env argument for interface
...
Update system_project.tcl
2021-11-22 15:22:16 +02:00
c2d37b2db3
pulsar_adc_pmdz: Initial commit
2021-11-22 13:39:17 +02:00
c71e5de928
zcu102: ad_fmclidar1_ebz, fmcomms5, fmcomms8 ( #811 )
...
adrv2crr_fmc: adrv9009zu11eg
adrv2crr_xmicrowave: adrv9009zu11eg
The IBUFGDS primitive is deprecated in UltraScale devices.
2021-11-22 08:09:46 +02:00
3cd203e9c7
scripts/adi_board.tcl: improvements for vcu128 DDR controller
...
- allow specifying the name of Axi Lite interface from the peripheral were to connect the control bus
- some DDR controllers have an Axi Lite control interface, this creates
a second address segment which causes issues, differentiate the memory
segment from control registers segment
2021-11-19 18:08:16 +02:00
e76f287e73
ad9081_fmca_ebz:vcu128: Initial version
...
* 4Txs / 4Rxs per MxFE
* Tx I/Q Rate: 250 MSPS
* Rx I/Q Rate: 250 MSPS
* DAC JESD204B: Mode 9, L=4, M=8, N=N'=16
* ADC JESD204B: Mode 10, L=4, M=8, N=N'=16
* DAC-Side JESD204B Lane Rate: 10Gbps
* ADC-Side JESD204B Lane Rate: 10Gbps
2021-11-19 18:08:16 +02:00
88b5c2d6db
projects/common/vcu128: Initial VCU128 support
2021-11-19 18:08:16 +02:00
e00def31d0
ad9081_fmca_ebz: versal: Remove external gt_reset logic
2021-11-19 14:01:48 +02:00
0b9631f1f7
ad9081_fmca_ebz: versal: Rename nets
2021-11-19 14:01:48 +02:00
ca6248ba88
ad9081_fmca_ebz/common/versal_transceiver.tcl: Reset also PLL
2021-11-19 14:01:48 +02:00
731ed0a7a5
ad9081_fmca_ebz/vck190: Updated to hierarchical versal transceiver
...
Vivado cannot nest multiple block designs than two layers. This makes
replication of designs difficult.
Create a hierarchy around the Versal transceiver that includes also the
converters, this type of interface would match the util_adxcvr
interface.
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-19 14:01:48 +02:00
1d951cfbae
ad9081_fmca_ebz/vck190: Change default profile to 2 lanes
2021-11-19 14:01:48 +02:00
81c7d7475d
ad463x: Fix readme
2021-11-17 16:48:59 +02:00
5795cf6720
ad9213_dual_ebz: Readme.md : Remove incorrect product page
2021-11-15 13:59:26 +02:00
daba543797
ad9082_fmca_ebz: Readme.md: Remove AD9081 from parts
2021-11-15 13:59:26 +02:00
fe9afd4392
ad9208_dual_ebz: Readme.md: Remove invalid product page
...
Product page on analog.com does not exists
2021-11-15 13:59:26 +02:00
2386abb89c
ad_quadmxfe1_ebz : Add readme file
2021-11-12 14:08:56 +02:00
adad6c930d
ad9081_fmca_ebz_qsys.tcl: Add RX_LANE_RATE and TX_LANE_RATE parameters
...
For ad9081/a10soc project, the RX_LANE_RATE and TX_LANE_RATE were computed
from SAMPLE_RATE. Remove SAMPLE_RATE and add RX_LANE_RATE and TX_LANE_RATE
as parameters. Update also computation examples from comments.
Signed-off-by: stefan.raus <stefan.raus@analog.com>
2021-11-12 13:04:57 +02:00
fe58a5fb47
adrv9009zu11eg/adrv2crr_fmcomms8: Add clock buffers for core clocks
...
The IBUFGDS primitive is deprecated in UltraScale devices.
Signed-off-by: Laszlo Nagy <laszlo.nagy@analog.com>
2021-11-11 17:33:10 +02:00
1cd866445e
ad_quadmxfe1_ebz: Initial version
...
Parametrizable project for the QUAD-MxFE platform ADQUADMXFE1EBZ,
ADQUADMXFE2EBZ, ADQUADMXFE3EBZ
Default mode set to:
TX JESD204C MODE 11, M=16, L=4
RX JESD204C MODE 4, M=8, L=2
For 204C 64B66B mode as physical layer the Xilinx Phy is uesd.
2021-11-10 14:03:34 +02:00
63b6711cfa
start adding some doc to the ./projects directory
...
This adds a Readme.md to each project directory with pointers to project
documentation in the wiki, and the drivers (if they exist). This will
help with some autogenerated doc in the wiki, that is generated with the
innovatily named "wiki_summary.sh" shell script that parses through
these Readme.md files, and generates a summary table.
Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Iacob Liviu Mihai <liviu.iacob@analog.com>
2021-11-10 14:01:06 +02:00
58c1d2e3b2
projects: fixed xcvr clocks that generated critical warning
2021-11-09 12:40:14 +02:00
5ad40b29e5
adrv9001/zed: Use global clock buffers for better fit the design
...
Occasionally with zed, the implementation failed at the placement stage where
the tool could not fit the logic cells inside a single clock region,
constraint required by the usage of regional clock buffers.
This commit allows the usage of the global clock buffers which help the tool
in such cases and allow a larger application logic to be implemented in fabric.
2021-11-08 13:53:51 +02:00
457c5f7d86
fmcjesdadc1: Fix ad9250 core parameters settings
...
Fix CONVERTER_RESOLUTION parameter setting for ad9250. Also deleted the
setting of BITS_PER_SAMPLE and DMA_BITS_PER_SAMPLE for ad9250 since they
are set by default to the desired values.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-11-04 12:18:06 +02:00
bcf5abb2fe
xmicrowave: Initial commit
2021-11-02 15:44:47 +02:00
1bc8a41aea
vc709_carrier: Add vc709 carrier ( #788 )
...
Added vc709 carrier to the projects/common folder location.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-11-02 12:05:42 +02:00
c5d216bba9
adrv9001/zcu102: Enable independent TX mode in CMOS
...
For CMOS case, lane rates are so low that reference clock of the source
synchronous interface can be routed on non-clock routes. The delays on
the clock line are adjusted by the digital interface tuning controlled
through software.
Lock down clock buffers on Rx and Tx interfaces, this avoids suboptimal
placement which causes large skew between clocks at the serdes pins.
2021-10-27 14:40:08 +03:00
03682f6193
projects/adrv9001/zcu102/lvds_constr.xdc: Fix timing constraints
...
1. Reduce max allowed skew between source synchronous clocks that can
occur due PCB differences. 250ps represents a difference more than an
inch.
2. In order to reduce skew between source synchronous clock and the
divided clock instruct the tool to use a common clock root for them.
2021-10-27 14:40:08 +03:00
d4126739b4
projects: remove hardcoded div_clk from xcvr
2021-10-27 12:11:22 +03:00
cb861f5299
ad463x: Fix readme
2021-10-26 15:42:57 +03:00
15a6480601
ad4630_fmc: Initial commit
2021-10-18 16:13:31 +03:00
ff090b60ef
daq2/zcu102: Fix the ad9144 data offload to use internal BRAM
2021-10-15 15:03:22 +03:00
3640c2b584
daq2/kcu105: Fix the ad9144 data offload to use internal BRAM
2021-10-15 15:03:22 +03:00
6ad54c1056
daq2/kc705: Fix the ad9144 data offload to use internal bram
2021-10-15 15:03:22 +03:00
907cd613aa
daq2/zc706: Increase BRAM utilization to 52%
2021-10-15 15:03:22 +03:00
e34346360d
scripts: Add logic for vivado version check
2021-10-12 14:34:11 +03:00
5db7574dce
scripts/adi_board.tcl: For older families stick with axi_interconnect
...
SmartConnect has higher resource utilization and worse timing closure
that makes several zed based projects to fail timing.
2021-10-07 14:18:49 +03:00
9295218a64
projects/ad9081_fmca_ebz: Updated makefiles
2021-10-05 16:56:57 +03:00
51b643b978
Makefile: Fix misc makefiles from projects and library
2021-10-05 14:24:48 +03:00
3a1babe366
ad9081_fmca_ebz/vck190: Reset GT with HMC7044 lock
...
Reset transceiver with a pulse
2021-10-05 14:09:51 +03:00
2562aead32
ad9081_fmca_ebz/common: Drive Rx DMA system side with DMA clock
2021-10-05 14:09:51 +03:00
8d547f31e1
ad9081_fmca_ebz/vck190: Initial version
2021-10-05 14:09:51 +03:00
6c58a8d1ab
ad9081_fmca_ebz/common: Add Versal transceiver support
2021-10-05 14:09:51 +03:00
56a25afa68
common/vck190: Initial version
2021-10-05 14:09:51 +03:00
6a681b9e8d
common/vmk180_es1: Initial version
2021-10-05 14:09:51 +03:00
833e5f0aff
common/vmk180: Initial version
2021-10-05 14:09:51 +03:00
2fec1356d6
scripts/adi_project_xilinx.tcl: VCK190 support
2021-10-05 14:09:51 +03:00
222c5782b6
scripts/adi_project_xilinx.tcl: Install ES1 board from XHUB, make project compile in batch mode
2021-10-05 14:09:51 +03:00
011c8c1f36
scripts/adi_project_xilinx.tcl: Add VMK180 & VMK180_ES1 support
2021-10-05 14:09:51 +03:00
c22f622599
scripts/adi_board.tcl: Versal support for memory interconnect and irq interconnect
2021-10-05 14:09:51 +03:00
08c2ce75fe
scripts/adi_board.tcl: Switch cpu_interconnect to SmartConnect
2021-10-05 14:09:51 +03:00
aaaba50f83
scripts/project-xilinx.mk: Update target to xsa and cleanup list
2021-10-05 14:09:51 +03:00
0a986f76b8
scripts: QUARTUS_VERSION and PRO_ISUSED can be set in system_project.tcl
2021-10-02 12:34:10 +03:00
0a3724e04c
s10soc: Update base desgin from ES to production, H-Tile version
2021-09-30 17:40:13 +03:00
5a3c3c878b
ad9213_dual_ebz: Initial commit
...
Used ADF4377 SPI configuration CPOL/CPHA 1 for increasing the reliability of the level translators
ad9213_dual_ebz/s10soc: Redesign the address layout
avl_peripheral_mm_bridge 0x0000000 0x0001FFFF
* sys_gpio_in 0x00000000
* sys_gpio_out 0x00000020
* sys_spi 0x00000040
* sys_gpio_bd 0x000000D0
* sys_id 0x000000E0
avl_mm_bridge_0 0x00040000 0x0007FFFF
* ad9213_rx_0.phy_reconfig_0 0x00000000
* ad9213_rx_0.phy_reconfig_1 0x00002000
* ad9213_rx_0.phy_reconfig_2 0x00004000
* ad9213_rx_0.phy_reconfig_3 0x00006000
* ad9213_rx_0.phy_reconfig_4 0x00008000
* ad9213_rx_0.phy_reconfig_5 0x0000A000
* ad9213_rx_0.phy_reconfig_6 0x0000C000
* ad9213_rx_0.phy_reconfig_7 0x0000E000
* ad9213_rx_0.phy_reconfig_8 0x00010000
* ad9213_rx_0.phy_reconfig_9 0x00012000
* ad9213_rx_0.phy_reconfig_10 0x00014000
* ad9213_rx_0.phy_reconfig_11 0x00016000
* ad9213_rx_0.phy_reconfig_12 0x00018000
* ad9213_rx_0.phy_reconfig_13 0x0001A000
* ad9213_rx_0.phy_reconfig_14 0x0001C000
* ad9213_rx_0.phy_reconfig_15 0x0001E000
* ad9213_rx_0.link_pll_reconfig 0x00020000
avl_mm_bridge_1 0x00080000 0x000BFFFF
* ad9213_rx_1.phy_reconfig_0 0x00000000
* ad9213_rx_1.phy_reconfig_1 0x00002000
* ad9213_rx_1.phy_reconfig_2 0x00004000
* ad9213_rx_1.phy_reconfig_3 0x00006000
* ad9213_rx_1.phy_reconfig_4 0x00008000
* ad9213_rx_1.phy_reconfig_5 0x0000A000
* ad9213_rx_1.phy_reconfig_6 0x0000C000
* ad9213_rx_1.phy_reconfig_7 0x0000E000
* ad9213_rx_1.phy_reconfig_8 0x00010000
* ad9213_rx_1.phy_reconfig_9 0x00012000
* ad9213_rx_1.phy_reconfig_10 0x00014000
* ad9213_rx_1.phy_reconfig_11 0x00016000
* ad9213_rx_1.phy_reconfig_12 0x00018000
* ad9213_rx_1.phy_reconfig_13 0x0001A000
* ad9213_rx_1.phy_reconfig_14 0x0001C000
* ad9213_rx_1.phy_reconfig_15 0x0001E000
* ad9213_rx_1.link_pll_reconfig 0x00020000
Connected directly to the h2s_lw_axi_master
* ad9213_rx_0.link_reconfig 0x000C0000
* ad9213_rx_0.link_management 0x000C4000
* ad9213_rx_1.link_reconfig 0x000C8000
* ad9213_rx_1.link_management 0x000CC000
* axi_ad9213_0.s_axi 0x000D0000
* axi_ad9213_1.s_axi 0x000D1000
* axi_ad9213_dma_0.s_axi 0x000D2000
* axi_ad9213_dma_1.s_axi 0x000D3800
2021-09-30 17:40:13 +03:00
8acf0296af
s10soc:ad_cpu_interconnect: Add an avl_address_width attribute
...
The default address space for a new bridge is 256 Kbytes. Add an
avl_address_width attribute to the ad_cpu_interoconnect porecess to
define other address space sizes if needed.
The avl_peripheral_mm_bridge will have an 128 Kbyte address space from
address 0x0000.
2021-09-30 17:40:13 +03:00
edd2956d58
data_offload: Fix util_[cu]pack offset to TDD syncs
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-30 14:45:54 +03:00
b9554a9a5a
ad9081_fmca_ebz: Integrate axi_tdd into zcu102 design
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-30 14:45:54 +03:00
58737e09ba
adi_project_intel.tcl: update quartus to 21.2
...
Update Quartus version to 21.2.0.
Signed-off-by: stefan.raus <stefan.raus@analog.com>
2021-09-30 09:53:53 +03:00
cfe0c0ced5
adi_project_xilinx.tcl, adi_ip_xilinx.tcl: update version to 2021.1
...
Update vivado version from 2020.2 to 2021.1 in projects and library scripts.
2021-09-24 12:11:11 +03:00
591a23156b
Makefiles: Update header with the appropriate license
2021-09-16 16:50:53 +03:00
b38747cefc
Make system: Be explicit in license that cover the make/build system
...
The build system is covered under a 1 Clause BSD license. Make sure
users are aware.
Signed-off-by: Robin Getz <robin.getz@analog.com>
2021-09-16 16:50:53 +03:00
1766b42a93
ad_mem_asym: Add option to control cascade layout
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-15 12:27:49 +03:00
12b7fbb3a3
scripts: Add *.gen to clean list
2021-09-14 16:44:23 +03:00
cc68bd5198
fmcjesdadc1: Update block design ( #743 )
...
Modified the project such that there is only one data path for the ADC data: deleted one of the JESD tpl instances, one of the cpack instances and one of the dma instances.
Signed-off-by: Dan Hotoleanu <dan.hotoleanu@analog.com>
2021-09-08 17:19:57 +03:00
7423ecae14
data_offload: Improve external synchronization
...
This commit adds a new synthesis option to the design, that controls
whether an internal clock domain crossing will be generated. Disabling
this option allows you to use a synchronization signal that is
synchronized to the write clock domain externally, and possibly shared
between multiple devices.
The default value retains the old behavior.
Signed-off-by: David Winter <david.winter@analog.com>
2021-09-08 11:58:01 +03:00
16a93a804b
adrv9001[intel]: Add second pair of DMAs
...
fix observations for PR
2021-09-01 15:04:14 +03:00
fec4137046
ad400xx_fmc: Parametrize board select, sampling rate and adc resolution
...
fix comments
2021-09-01 15:03:10 +03:00
b7f34f7bd9
adrv9009zu11eg & common/zcu102 : Fix zynqmp ref clock definition
...
The derived clocks of the zynqmp core are not calculated correctly due
rounding issues, instead of 100MHz the value of 99999001 is received
causing warnings during system validation.
This can be fixed/worked around with the proper reference clock
definition.
2021-08-20 10:46:09 +03:00
b354d517f5
daq2: Connected loose ad9144 dunf flag that fixes the critical warning
2021-08-20 10:38:52 +03:00
4cf53f373b
Revert "adrv9009zu11eg: Integrate data_offload"
...
This reverts commit 78999e154e
2021-08-19 21:43:09 +03:00
1f24344620
Update Quartus version to 20.4
...
Update quartus compilation tools from 20.1 to 20.4.
Remove hardcoded version from axi_adrv9001 ip.
2021-08-12 11:15:01 +03:00
b1d2a069e8
adi_make: Update bin build flow for 2020.1 tools
...
The 2020.1 Xilinx tools have a different tcl procedures to build the boot.bin
file.
This commit updates the adi_make tcl flow for the new tools. The new
process is not backwards compatible with tools older than 2020 version.
2021-08-10 17:44:30 +03:00
e9e278c898
ad9081_fmca_ebz: Remove bypass gpio
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-08-06 11:55:24 +03:00
2178191610
ad9081_fmca_ebz: Switch util_dacfifo to data_offload engine
...
Memory requirements are the same as with the dacfifo (1 MiB).
Signed-off-by: David Winter <david.winter@analog.com>
2021-08-06 11:55:24 +03:00
564ef77588
data_offload: Calculate AXI_ADDRESS_LIMIT automatically
2021-08-06 11:55:24 +03:00
c82b0fb420
data_offload: Delete fifo_dst_rlast
2021-08-06 11:55:24 +03:00
4026f2d414
daq2/zc706: PL DDR size is 1GByte
2021-08-06 11:55:24 +03:00
703cc8a17e
data_offload_bd: Calculate the address limit from the address width
2021-08-06 11:55:24 +03:00
78999e154e
adrv9009zu11eg: Integrate data_offload
2021-08-06 11:55:24 +03:00
dc910420bd
daq2: Integrate data_offload
2021-08-06 11:55:24 +03:00
4c03580156
data_offload: Add integration process for Xilinx carriers
2021-08-06 11:55:24 +03:00
f2ca956d23
pluto: Fix dunf connection
2021-08-05 18:08:12 +03:00
bbb151f9f5
adi_project_xilinx.tcl: Set default value of ADI_USE_OOC_SYNTHESIS to 1
...
In order to workaround optimization issues hit in Vivado 2020.2,
set ADI_USE_OOC_SYTHESIS variable by default to 1. This will build
projects in Out Of Context mode.
Projects can be build in Project Mode by exporting ADI_USE_OOC_SYTHESIS=n.
2021-07-29 14:06:42 +03:00
9d5de2fc21
Update Vivado version to 2020.2
...
Update vivado version to 2020.2:
- update default vivado version from 2020.1 to 2020.2
- add conditions to apply specific contraints only in Out Of Context mode.
- update DDR controler parameters for vcu118 and kcu105 dev boards
2021-07-29 14:06:42 +03:00
907b750943
ad9083: Removed FIFO and increased DMAC transfer length
2021-07-28 12:45:20 +03:00
8343c03f5c
adrv9371x: remove IOB attribute from rx and rx_os
2021-07-26 12:42:21 +01:00
1158538753
adi_board: Fix ad_connect command tracing
...
Signed-off-by: David Winter <david.winter@analog.com>
2021-07-22 15:02:36 +03:00
796af696da
ad_fmclidar1_ebz: Remove invalid ad_connect invocations
...
This commit removes two invalid ad_connect invocations, which weren't
caught in the original tests for commit cdda184007
2021-07-22 15:02:25 +03:00
a3e049ae03
scripts/adi_project_xilinx: Set number of parallel OOC jobs through environment variable
2021-07-13 10:09:08 +03:00
cdda184007
adi_board: Rewrite ad_connect to support all input permutations
...
The goal of this commit is to make sure there isn't any significance to
the order in which parameters of ad_connect are specified.
As an example, previously you could only `ad_connect target VCC`, while
`ad_connect VCC target` would fail.
Note: This code intentionally ignores bd_{,intf_}ports, because
these can all be treated as bd_pins.
Signed-off-by: David Winter <david.winter@analog.com>
2021-07-09 12:43:31 +03:00
63ac142874
adrv9001:a10soc:system_qsys.tcl: set clock polarity to 0
...
For fixing "Failed to reset the device and set SPI Config"
error, both clockPolarity and clockPhase should be disabled
or both enabled. By default both are unset.
Signed-off-by: Stefan Raus <stefan.raus@analog.com>
2021-06-16 11:42:50 +03:00
75b965e87f
ad9081_fmca_ebz/zcu102: Enable 204C modes
2021-06-10 09:53:43 +03:00
6637436c2e
scripts/adi_board.tcl: Use div2 out clock from xcvr in case of GTH and 204C
2021-06-10 09:53:43 +03:00
27465ce9c0
ad9081_fmca_ebz/zcu102: Fix spaces
2021-06-10 09:53:43 +03:00
7b7609d21a
ad469x: Clean system_project.tcl
2021-06-03 15:41:58 +03:00
d9bc014c98
adrv9001/zcu102: Enable independent Tx from Rx in CMOS mode
2021-05-26 15:44:45 +03:00
568bef4a38
adrv9001/a10soc: Initial version
...
This project supports CMOS mode only.
2021-05-26 15:44:45 +03:00
5d008c3eca
Correct constraints file pin mapping
2021-05-25 16:27:58 +03:00
0ad691a603
ad9081_fmca_ebz/zcu102: Differentiate parameters based on lane rate
2021-05-14 15:39:40 +03:00
8183599b51
ad9081_fmca_ebz/zcu102: Fix typo
2021-05-14 15:39:40 +03:00
cf7f45ffcc
ad9081_fmca_ebz: Fix for F=8
2021-05-14 15:39:40 +03:00
7b2ba41bdd
ad9081_fmca_ebz/vcu118: Adjust QPLL params and diff swing
...
This commit fixes the 16.5Gbps lane rate case where the link drops
after few seconds an initial successful link up happens.
A few seconds delayed calibration process can workaround this but with
having the differential drivers swing increased this is no longer
required.
2021-05-14 15:39:40 +03:00
eba3409d78
ad9082_fmca_ebz: Use 9081 system_bd, updated comments
2021-05-14 15:39:40 +03:00
0d9e38bdbe
ad9081_fmca_ebz: Update path to common block design
...
Use absolute paths so ad9082 wrapper project can include the
system_bd.tcl instead of duplicating code.
2021-05-14 15:39:40 +03:00
680d28476c
ad9081_fmca_ebz: Add LANE_RATE param to all projects
...
The block design expects a lane rate to be set in the system project.
2021-05-14 15:39:40 +03:00
bd6ec360e2
ad9081_fmca_ebz/vcu118: Set XCVR params for 204C link
...
Set XCVR parameter for 204C 24.75 Gbps with a dynamic range of 10Gbps..24.75Gpbs
Organize XCVR params based on lane rate
2021-05-14 15:39:40 +03:00
693c002668
ad9081_fmca_ebz/common/ad9081_fmca_ebz_bd: Add 204C support for XCVR
...
Remove Xilinx PHY and simplify project
2021-05-14 15:39:40 +03:00
d92f925b06
ad9081_fmca_ebz: Disable XBAR from DAC TPL
2021-05-14 15:39:40 +03:00
77a5edaa83
scripts/adi_board.tcl: In 204C do not connect SYNC
...
Take link mode parameter from util_adxcvr, check it against the axi_adxcvr.
2021-05-14 15:39:40 +03:00
1db04a47b8
ad9083_evb: Update parameters to 10Gpbs lane rate
2021-04-19 13:21:34 +03:00
8335e1bd9a
sysid: Make sure gitbranch_string is always declared
...
Parsing of not existed "gitbranch_string" fails the build process.
2021-03-24 13:34:32 +02:00
6a374ef457
ad469x/zed: Add multicycle path constraint
2021-03-22 13:05:05 +02:00
40baa63f0f
adrv2crr_fmcomms8: Fix system_top.v
2021-03-19 17:56:28 +02:00
a1773c661c
adrv9009zu11eg_crr: Update spi
...
Add two more CS signals to P25 connector
2021-03-10 10:53:11 +02:00
3dce87d09b
ad9083: Add reference design for ad9083 eval board
2021-03-10 10:52:03 +02:00
dcec4fe1b7
adrv9001/zc706: Fix spaces
2021-03-10 10:35:52 +02:00
dc186645d8
adrv9001/zc706: Fix comments HPC to LPC
2021-03-10 10:35:52 +02:00
4a772265a9
Update Quartus Prime version from 19.3.0 to 20.1.0
...
adi_project_intel.tcl: Change quartus version to 20.1.0.
library: Set qsys version so that IP instances won't require a specific version.
2021-03-08 11:29:33 +02:00
1099badaf4
ad9082_fmca_ebz:zc706: Initial version
2021-03-05 15:54:23 +02:00
2213527f29
ad9082_fmca_ebz:zcu102: Initial version
2021-03-05 15:54:23 +02:00
f56e3c305b
ad9082_fmca_ebz:vcu118: Initial version
2021-03-05 15:54:23 +02:00
6b13b32f24
ad9081_fmca_ebz: Workaround DMA bug when bus size equals max burst size
2021-03-04 11:13:29 +02:00
677c154134
adrv9001/zcu102/cmos: Loosen up clock skew constraints to match LVDS settings
...
Set the same inter clock skew characteristics as used in LVDS mode. The
physical lanes/routes are common on both modes.
2021-03-04 11:13:10 +02:00
03de08609b
fmcomms2/zed: Disable unused TDD to save space and timing
2021-03-04 11:13:10 +02:00
0dd3173547
adrv9001/zc706: Initial commit
...
The project supports CMOS interface only.
VADJ on the ZC706 must be programmed to 1.8V
Instructions can be found here:
https://www.xilinx.com/Attachment/ZC706_Power_Controllers_Reprogramming_Steps.pdf
https://forums.xilinx.com/t5/Xilinx-Evaluation-Boards/ZC706-Doesn-t-work-with-VADJ-at-1-8v/td-p/430086
2021-03-03 09:03:03 +02:00
3be5137aec
cn0540/cora: Remove multicycle constraint
...
Design uses 80MHz spi_clk which does not require
special considerations
2021-02-18 14:14:16 +02:00
701e5f6515
scripts/adi_board.tcl: Add simulation support
...
This will allow building base test harnesses and place on top of them
existing block designs for simulation purposes.
Test harnesses will contain basic functionality like
- clock and reset generators
- AXI master to aid register access of the cores.
- memory model of the DDR
- interrupt controller
Existing procedures (ad_mem_hp0_interconnect, ad_cpu_interconnect, ... ) will
connect to this harness as they do to a real base design.
2021-02-12 16:21:10 +02:00
0374a7c1ac
ad9081_fmca_ebz/vcu118: Added common 204C use cases as example
2021-02-05 15:24:15 +02:00
ddd8a14790
ad9081_fmca_ebz: Remove system reset from Xilinx PHY
...
Reset in device clock domain caused timing failures.
Since link reconfiguration is not supported the reset is not required.
2021-02-05 15:24:15 +02:00
af3e1c7003
ad9081_fmca_ebz/a10soc: Np 12 support
2021-02-05 15:24:15 +02:00
f73ed741c9
fmcadc5: Connect link clock to second JESD link layer
2021-02-05 15:24:15 +02:00
3f2f88ebbc
ad_fmclidar1_ebz: Set bits per sample towards the DMA interface
2021-02-05 15:24:15 +02:00
dafdd1c1e9
ad9208_dual_ebz: Use ad_xcvrcon procedure to connect device clock
2021-02-05 15:24:15 +02:00
bb9eafceef
ad9081_fmca_ebz/zcu102: Add case analysis to select correct out clock frequency
2021-02-05 15:24:15 +02:00
d0f8a81b2f
ad9081_fmca_ebz: Np 12 support
...
204B functional
204C functional
2021-02-05 15:24:15 +02:00
454b900f90
jesd204: Xilinx: NP=12 support
...
To support deterministic latency with non-power of two octets per frame
(F=3,6) the interface width towards the transport layer must be resized
to match integer multiple of frames.
e.g Input datapath width = 4; Output datpath width = 6;
for F=3 one beat contains 2 frames
for F=6 one beat contains 1 frame
The width change is realized with a gearbox.
Due the interface width change the single clock domain core is split
in two clock domains.
- Link clock : lane rate / 40 for input datapath width of 4 octets 8b10b
- lane rate / 20 for input datapath width of 8 octets 8b10b
- lane rate / 66 for input datapath width of 8 octets 64b66b
- Device clock : Link clock * input data path width / output datapath width
Interface to transport layer and SYSREF handling is moved to device clock domain.
The configuration interface reflects the dual clock domain.
If Input and Output datapath width matches, the gearbox is no longer
required, a single clock can be connected to both clocks.
2021-02-05 15:24:15 +02:00
7be66b63c1
adrv9009zu11eg:fmcomms8: Fix lane swapping for TX channels 0 and 1 on the FMCOMMS8
2021-02-05 15:07:09 +02:00
6d504d14cf
fmcomms8: zcu102: Fix lane swapping
2021-02-05 15:07:09 +02:00
0fd5590e56
ad9081_fmca_ebz: a10soc: Initial version
...
Parametrizable project with default profile of:
M=8 L=4 SampleRate=250 MSPS
LaneRate=10 Gbps
2021-02-05 10:24:59 +02:00
6e6c51dd27
common/a10soc: Bridge support
2021-02-05 10:24:59 +02:00
f0b753321a
common/intel: Add util_adcfifo integration script
2021-02-05 10:24:59 +02:00
3041e77659
ad40xx/zed: Update constraints
2021-02-04 11:04:32 +02:00
05469a011c
ad40xx/xilinx: Activate AXI_SLICE_SRC for the DMA
2021-02-04 11:04:32 +02:00
dd4c8d6807
adrv9001/zcu102: Add debug header
2021-01-26 15:22:41 +02:00
728904af09
adrv9001/zcu102: Run postRoutePhysOpt to close Rx1 to Rx2 path timing
2021-01-26 15:22:41 +02:00
bae7e48c50
adrv9001/common: Run DMAs @ 100MHz
2021-01-26 15:22:41 +02:00
f68c222489
cn0501/coraz7s: Fix sysid
2021-01-22 15:40:37 +02:00
bb44e5399f
adrv9001/zed: Connect TDD sync to PMOD JA1
2021-01-20 13:00:01 +02:00
3918d43cd1
adrv9001/zcu102: Add TDD sync to PMOD0 J55.1
2021-01-20 13:00:01 +02:00
fe9f72db9c
adrv9001/common: Export TDD mode signal
2021-01-20 13:00:01 +02:00
18b2a8b0a7
adrv9001/zed: Add TDD support
2021-01-20 13:00:01 +02:00
0c2745361b
adrv9001/zcu102: Add TDD support
2021-01-20 13:00:01 +02:00
6f2f2b8626
makefile: Regenerate make files
2021-01-20 01:02:56 +02:00
da61515d41
ad40xx: Fix bd.tcl script
2021-01-20 01:02:56 +02:00
acbbd4636a
sysid: Upgrade framework, header/ip are now at 2/1.1.a
...
Unify tcl scripts; rename adi_pd_intel.tcl to adi_pd.tcl
add git branch to internal use area; update log prints;
update xilixn projects; fix cn0506 sysid script;
2021-01-20 01:02:56 +02:00
da9828a63e
ad9081:zcu102: Expose parameters to environment
...
Allow setting project parameters from the environment.
2021-01-19 17:10:08 +02:00
235fb4859a
usrpe31x: Use adi_project_create instead of adi_project
2021-01-15 15:26:43 +02:00
f1421c91ee
sidekiqz2: Use adi_project_create instead of adi_project
2021-01-15 15:26:43 +02:00
f68393ecb9
adrv936x: Use adi_project_create instead of adi_project
2021-01-15 15:26:43 +02:00
3e237459e3
pluto: Use adi_project_create instead of adi_project
2021-01-15 15:26:43 +02:00
d9639db991
m2k: Use adi_project_create instead of adi_project
2021-01-15 15:26:43 +02:00
Laszlo Nagy
LIacob106
Adrian Costina
Filip Gherman
sergiu arpadi
alin724
AndreiGrozav
Dan Hotoleanu
Iulia Moldovan
Stanca Pop
PopPaul2021
Laszlo Nagy
stefan.raus
Robin Getz
hotoleanudan
Istvan Csomortani
Mihaita Nagy
David Winter
Owen McAree
vladimirnesterov