b3c784f76a
ad9467_fmc: Made some cosmetic changes on the block design script.
2014-10-20 13:28:34 +03:00
4b8720b551
fmcomms2_zc706: Remove top level constraints
...
Remove all the unnecessary top level constraint definitions.
2014-10-20 13:25:01 +03:00
7115864b4c
ad9434_fmc: Remove top level constraints
...
Remove all the unnecessary top level constraint definitions.
2014-10-20 13:23:37 +03:00
5deffd57b1
zed: Remove top level constraints
...
Remove top level constraints from the ZED base design.
2014-10-20 13:20:27 +03:00
0c56e5b912
ad9434_fmc: Fix GPIO width
...
GPIO port width is 15 instead of 32
2014-10-20 10:59:30 +03:00
7f8270d74b
ad9625_fmc: generic dma fifo for zynq and non-zynq boards
2014-10-17 14:38:16 -04:00
0b30f98640
ad9625_fmc/zc706: remove top level constraints
2014-10-17 14:38:15 -04:00
f3c9627cae
adi_project: demote reset warnings to info
2014-10-17 14:38:13 -04:00
14ccdaaa78
kcu105: removed spdif reset
2014-10-17 14:00:00 -04:00
46d1710539
axi_ad9625: added constraints
2014-10-17 13:57:30 -04:00
37b608f397
axi_ad9144: added constraints
2014-10-17 13:57:09 -04:00
380eeec013
daq2/kcu105: ethernet fix
2014-10-17 13:48:35 -04:00
fca0714478
adv7511/kcu105: ethernet fix
2014-10-17 13:48:33 -04:00
e73b3b52dc
kcu105: ethernet fix
2014-10-17 13:47:50 -04:00
df3915e2b0
ad9625: constraints added
2014-10-17 13:41:56 -04:00
819a3d0802
util_adc_pack: removed latches
2014-10-17 15:40:16 +03:00
2600b1f359
daq3: tx interleave and dma fifo axi streaming
2014-10-15 14:51:04 -04:00
6d76e0b768
zc706: remove top level constraints
2014-10-15 14:51:02 -04:00
9d43a08865
gt: constraint modifications
2014-10-15 14:51:01 -04:00
86724f7fc7
gt: tx lane interleaving
2014-10-15 14:51:00 -04:00
206b96d55a
ip: constraint changes
2014-10-15 14:50:58 -04:00
5715c5b28f
dmafifo: axi stream interface
2014-10-15 14:50:57 -04:00
f0b25c39a3
wfifo: added axi stream support
2014-10-15 14:50:56 -04:00
0aed11fa6c
adi_project: demote useless warnings
2014-10-15 14:50:54 -04:00
51a15a28b7
axi_fifo2s: added constraints
2014-10-15 14:50:53 -04:00
4d4a7981f2
fmcomms1: Connect DMA controller directly to the HP ports
...
The AXI DMAC controller nativly supports AXI3, there is no need to insert a interconnect to do protocol conversion.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:46:07 +03:00
7d3be14ab5
common: Connect audio clkgen reset
...
While we are at it also hide the unused locked pin.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:44:46 +03:00
fd89458708
common: Set cpu interconnect strategy to minimize area
...
There will rarely be concurrent access to the peripheral control bus
interconnect, so there is no need to optimize for performace. Setting the
interconnect strategy to minimize area can reduce the resource usage by
~90%.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:43:54 +03:00
d2a04856a9
common: Fix xlconstant output pin name
...
On 2014.2 xlconstant output pin name is 'dout'.
2014-10-15 15:37:06 +03:00
02802644bf
fmcjesdadc1: Fix a few warning and issue with ILA
...
+ GPIO width is 15
+ Fix ILA core
2014-10-15 15:37:05 +03:00
865cbab3a2
ad9671_fmc: Updated a5gt project with start of frame information
2014-10-15 10:53:33 +03:00
8934a66013
usdrx1: Update project so that the AD9671 cores can be synchronized
2014-10-13 17:06:40 +03:00
f528873fa9
fmcomms2: Add an additional SPI interface for up/down converter board
...
Supported carriers are: ZC706, ZC702 and Zed.
2014-10-10 18:47:07 +03:00
ca4c961891
fmcomms2: Use ad_iobuf instance on system_top
...
Use ad_iobuf instance on system top, instead of separate IOBUF instances.
2014-10-10 18:45:39 +03:00
e21d26e456
fmcomms2: Cosmetic changes
...
Get rid of unwanted whitespaces.
2014-10-10 18:25:17 +03:00
fe8a076b2e
fmcomms2: Cosmetic changes on *_bd.tcl script
2014-10-10 17:06:32 +03:00
3d5ef9a8ed
util_dac_unpack: Fix unpack order with 1 channel
...
Due to the delay between the dac_valid and the fifo_valid signal we need to
have two counters. One counter which counts the number of incoming
dac_valid signals and generates the dma_rd signal and one counter for the
offset which gets set to 0 when fifo_valid is set.
This fixes issues with the unpack order when only one channel is active.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:14 +03:00
dd70320b00
axi_spdif: Add missing signals to the regmap read sensitifity list
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:09 +03:00
e7af6219dd
axi_spdif: Don't use non-static expressions in port assignments
...
Fixes a warning from the tools.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:05 +03:00
ab5eee42e4
axi_spdif: Set unused signals to 0
...
Fixes warnings about undriven signals from the tools.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:26:00 +03:00
0b587e6fb1
axi_i2s: Add missing signals to the regmap read process sensitivity list
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:56 +03:00
cf2bbf66b7
axi_i2s: Set unused signals to 0
...
Fixes warnings from the tools about undriven signals.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:51 +03:00
22169c4a9c
axi_dmac: Add default driver values for optional input ports
...
This silences warnings from the tools about undriven ports.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:46 +03:00
e7dbdff60c
axi_dmac: Hide fifo_wr_sync signal if C_SYNC_TRANSFER_START != 1
...
The fifo_wr_sync signal is only used when C_SYNC_TRANSFER_START = 1, so hide it otherwise.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:41 +03:00
8557073b56
axi_dmac: Hide fifo_wr bus when source type is not the fifo interface
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:33 +03:00
3e6f553ce3
axi_dmac: Add clock signal spec for m_axis/s_axis bus
...
This silences warnings from the tools about having no clock assigned to the bus.
Also fix the name of the TVALID signal.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:24 +03:00
7a9e694446
fmcomms2: Connect DMA directly to the HP ports
...
The DMA controller is able to send AXI3 compatible requests, no need to add
a interconnect for protocol conversion in between the DMA controller and the
HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:14 +03:00
87047fd83e
fmcomms2: Set dac_unpack channels to 4
...
There are only 4 DAC channels in the fmcomms2 design, so set the number of
channels of the dac_unpack core to 4. This slightly reduces resource usage
as well as reducing the DMA alignment requirement from 128bit to 64bit. The
later value is what existing applications expect the alignement requirement
to be.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:06 +03:00
c2ed80e8bb
axi_dmac: Drive unused signals to 0
...
This silences a few warnings from the tools about undriven signals.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:49 +03:00
aee95ebe96
axi_dmac: Fix dummy AXI a{r,w}len fields width
...
The dummy a{r,w}len fields should have the same width as the real a{w,r}len
fields in order to not break auto AXI bus version detection.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:20:43 +03:00
Istvan Csomortani
Rejeesh Kutty
Adrian Costina
Lars-Peter Clausen