Import documentation from the IP library and wiki page.
Make the background of the clock images less opaque so it's easier to
read.
Don't split roles, even though are valid, are a nightmare to
regex-match, if necessary.
Signed-off-by: Ionut Podgoreanu <ionut.podgoreanu@analog.com>
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Use interref (doctools cross-repository) to link the docs guidelines
Add user guide pages, update IP references
Add axi_adc/dac, up_if, "Use ADI IPs", "Creating new IP",
Update AXI DMAC, JESD204, I3C Controller, SPI Engines
Minor fixes in the frameworks and register maps,
the latter following the discussed guidelines.
Update AXI terms to manager and subordinate.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Signed-off-by: Laez Barbosa <laez.barbosa@analog.com>
Signed-off-by: Istvan-Zsolt Szekely <istvan.szekely@analog.com>
SPI Engine: create inverted CS mode
Add a CS Invert Mask instruction for selecting the polarity of
the Chip Select pins.
Signed-off-by: Laez Barbosa <laez.barbosa@analog.com>
Rename "idle bus" to "bus available" per specification:
* Tune it to require < 1us.
Rename "IBI auto" to "IBI listen":
* Clarify that the controller is listening for IBI's:
* Explain that this field should be set.
* Fix for known IBI's DA with IBI disabled.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
New features:
1. External sync force the phase align. The external sync was used to align
the phases of enabled pwms, but only after being armed by a
load_config signal toggle.
This feature lets the user decide between using load_config to
arm and wait for a neg-edge of sync or automatic phase align trigger
on the ext_sync neg-edge.
2. Force align. Lets the user chose between immediately stopping the
active pulses and realigning them, or waiting for all running pulse
periods end, before realigning.
3. Start at sync. When this feature is activated, the pulses will start immediately
after the trigger event. Otherwise, each pulse will start after a period
equal to the one for which it is set.
4. Use parameters to set the default status after reset of the
- soft reset
- start at sync
- force align
- ext sync align
Update regmap.
Fixes:
1. The polarity on disabled channels was staying high instead of low.
2. Fix 0 and 100 proc duty cycle configuration.
Signed-off-by: AndreiGrozav <andrei.grozav@analog.com>
Signed-off-by: Alin-Tudor Sferle <Alin-Tudor.Sferle@analog.com>
docs: Add JESD204 documentation in sphinx
Fixes several semantic issues from the original doc in wiki
Implicit path to library when the doc is hierarchically coherent with the
library.
Signed-off-by: Carlos Souza <carlos.souza@analog.com>
Co-authored-by: Jorge Marques <jorge.marques@analog.com>
* SPI Engine: Add registers for Offload memory and FIFO sizes
Adds registers at dword 0x04 and 0x05, respectively allowing software
to get the sizes of the Offload Module memories (command and sdo) or
the sizes of the FIFOs on the AXI regmap.
Signed-off-by: Laez Barbosa <laez.barbosa@analog.com>
Use tcl script instead of static xmls for the interface.
Easier to maintain and are not gitignored.
Rename spi_master to spi_engine because every interface should be
prefixed by the IP name; in this case, spi_engine.
Also, remove interface/*.sv files on make clean and git ignore them.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
The extensions have been moved to docs tools.
The source code is available at
https://github.com/analogdevicesinc/doctools
And is installed as before:
(cd docs ; pip install -r requirements.txt --upgrade)
Since the package is listed on the requirements.txt file.
Also, add index for library and projects
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Set validation ranges for DATA_WIDTH and NUM_OF_CS for the expected
min/max values in the verilog source code.
Also, fix swapped description for CPHA in the documentation.
Signed-off-by: Carlos Oliveira <caosjr8@gmail.com>
Replaces Symbolator with custom component diagram generator for more
reliable diagrams.
It uses the IP-XACT file, if it is not found, a placeholder is added
instead.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
Import aiohttp and asyncio only when needed.
Better warning for unknown signals, params.
Use pattern matching in regmap parsing.
Fixup bundle count.
Add lists clarification to guidelines.
Enforce #1229 rules.
Clean-up Makefile.
Use non-breaking hyphen.
Signed-off-by: Jorge Marques <jorge.marques@analog.com>
podgori
Jorge Marques
Alin-Tudor Sferle
PopPaul2021
Jorge Marques
LBFFilho
Ionut Podgoreanu
AndreiGrozav
bluncan
PIoandan
ladace
Stanca Pop
caosjr
Sergiu Arpadi
Iulia Moldovan
Alin-Tudor Sferle
laurent-19
caosjr
cristianmihaipopa