Commit Graph

139 Commits (c45d39df51b30b328c88206e8ef0f42f348ce782)

Author SHA1 Message Date
Rejeesh Kutty c45d39df51 dac/adc- make common instances 2015-08-21 14:41:35 -04:00
Rejeesh Kutty e3ec6b48fc dac/adc- make common instances 2015-08-21 14:41:30 -04:00
Rejeesh Kutty f31c1c9caa dac/adc- make common instances 2015-08-21 14:41:26 -04:00
Rejeesh Kutty e4e4700950 dac/adc- make common instances 2015-08-21 14:41:13 -04:00
Rejeesh Kutty 54b4365f6c dac/adc- make common instances 2015-08-21 14:41:09 -04:00
Rejeesh Kutty 799001403f mult-macro: use primitive parameters 2015-08-20 13:54:16 -04:00
Rejeesh Kutty b0079e60bf ad-rst - common instance for adc/dac 2015-08-20 11:37:16 -04:00
Adrian Costina 6ae0c8f85e library: Fixed changes related to parameters 2015-08-20 18:13:54 +03:00
Rejeesh Kutty 928ee4972b dac/adc-rst: common ad-rst instance 2015-08-19 14:54:43 -04:00
Rejeesh Kutty 483e375910 dac/adc-rst: common ad-rst instance 2015-08-19 14:54:38 -04:00
Rejeesh Kutty f8b3346e97 axi_jesd_xcvr- ad_rst register changes 2015-08-19 13:26:38 -04:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
Istvan Csomortani 10d9de39a1 axi_ad9361/tdd: Update the synchronization logic
The master will regenerate a sync pulse periodically. The period can be defined by software.
2015-08-19 12:21:23 +03:00
Rejeesh Kutty 041be729f6 common/ip-constrs- uniform simple constraints will do 2015-08-13 13:03:51 -04:00
Rejeesh Kutty a2b816beda common/up_hdmi_tx: wrong clock on vdma status signals 2015-08-13 13:03:51 -04:00
Rejeesh Kutty 5edf61c40a ad_rst:- allow preset to be synchronized as reset 2015-08-13 13:03:51 -04:00
Rejeesh Kutty 2bcac36e33 common/up_- change to asynchronous resets 2015-08-13 13:03:51 -04:00
Rejeesh Kutty 10d4da64dd axi_jesd_gt: move master/slave control to a util module 2015-08-13 13:03:51 -04:00
Rejeesh Kutty e4f94664a6 axi_jesd_gt- remove per lane control/status to channel 2015-08-13 13:03:51 -04:00
Rejeesh Kutty f807490ed1 axi_jesd_gt- per lane group 2015-08-13 13:03:51 -04:00
Rejeesh Kutty 4c8206608c axi_jesd_gt- separate es-axi 2015-08-13 13:03:51 -04:00
Rejeesh Kutty e4b0710923 axi_jesd_gt- per lane split-up 2015-08-13 13:03:51 -04:00
Istvan Csomortani ad80561379 TDD_regmap: Fix CDC for control signals 2015-08-06 15:16:39 +03:00
Istvan Csomortani e19d476b58 TDD_regmap: Fix addresses 2015-08-06 15:15:50 +03:00
Istvan Csomortani d2c99acae8 fmcomms2/TDD: Update synchronization interface
Synchronization is done by a simple req/ack interface between a master and slave terminal.
2015-08-06 15:14:36 +03:00
Istvan Csomortani 8e631e56d6 fmcomms2: Add a synchronization interface for TDD mode.
Supported carrier are ZC706 and RFSOM.
The synchronization pulse is automatically generated by the master terminal, when TDD mode is enabled.
By default a terminal is slave, software must write  0x01 into TDD register 0x50.
2015-07-28 14:42:54 +03:00
Rejeesh Kutty cd5ce3349f iqcor- move i/q sel inside the module 2015-07-23 15:55:45 -04:00
Rejeesh Kutty a4461545fa axi-ip: constraints - altera 2015-07-22 12:46:06 -04:00
Rejeesh Kutty 559893c0a3 altera- obsolete cores 2015-07-21 11:04:26 -04:00
Rejeesh Kutty 86dabbe5fc jesd-align-- xilinx/altera merge 2015-07-21 10:57:00 -04:00
Istvan Csomortani 9f7fff2d2f axi_ad9361/tdd: Add new control signals to the TDD data flow control logic
Add tdd_gated_[tx/rx]_dmapath control bits to the TDD logic. With these control line, the user can choose between gated and free-running (like in FDD mode) data flow control.
2015-07-16 14:10:49 +03:00
Rejeesh Kutty 6e3817d419 axi_jesd_xcvr: individual reset control 2015-07-13 10:04:34 -04:00
Rejeesh Kutty b25b2e3020 registers for signal tap 2015-07-08 15:47:45 -04:00
Rejeesh Kutty ea2bd71904 synchronize up signals separately 2015-07-07 12:51:13 -04:00
Rejeesh Kutty c1fcbeec8e library/axi_jesd_xcvr: interface name matching 2015-07-07 10:21:53 -04:00
Rejeesh Kutty 3a5da47239 xcvr- initial checkin 2015-07-06 13:51:55 -04:00
Lars-Peter Clausen cf6052e2a8 axi_hdmi_tx: Add control to bypass chroma sub-sampler
Add a control bit to the register map that allows to bypass the chroma
sub-sampler in the axi_hdmi_tx core. This is primarily interned to be used
to send the test-pattern directly to the HDMI transmitter without modifying
it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-30 21:16:09 +02:00
Lars-Peter Clausen d6c64e031f axi_hdmi_rx: Drop TPG enable from register map
The TPG is no longer part of the RX core and the corresponding bit in the
register map isn't hooked up to anything. So drop it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-30 18:02:43 +02:00
Lars-Peter Clausen 542d64bb5a up_hdmi_rx: Fix enable control
Connect the enable signal in the register map to the up_preset signal so
that it is possible to enable/disable to core at runtime.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-30 18:02:43 +02:00
Lars-Peter Clausen 231a21548c up_hdmi_rx: Fix TPM OOS clear
The TPM OOS status flag is in bit 1. Make sure writing to bit 1 rather than
bit 0 clears the TPM OOS.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-30 18:02:43 +02:00
Rejeesh Kutty 185e489802 cpack- signaltap mess 2015-06-29 16:31:53 -04:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
Rejeesh Kutty ac6e28c461 library/common: add altera signaltap 2015-06-19 14:33:01 -04:00
Istvan Csomortani ddc08c960c ad_tdd_control: Connect the reset to all the flops 2015-06-11 12:07:47 +03:00
Rejeesh Kutty e2f4a4c5cf library: make preset registered for timing paths 2015-06-10 13:41:41 -04:00
Istvan Csomortani c926daca3a ad9361/tdd: Fix generation of tx_valid_* signals
In FDD mode the tx_valid_* signals are generated inside the axi_ad9361_tx module, in function of
the selected dac data rate. In TDD mode, these signals are gated by the tdd_enable and tdd_tx_dp_en signals.
In other words, the tx_valid_* signals will be valid just when tdd_enable and tdd_tx_dp_en is active.
2015-06-08 16:22:21 +03:00
Istvan Csomortani 2e877389b2 ad9361_tdd: Some naming and hierarchical changes 2015-06-04 18:09:49 +03:00
Istvan Csomortani 3b1ea7e528 axi_ad9361/tdd: Cherry picked commit 598ece4 from hdl_2015_r1 branch
598ece4c8d
2015-06-04 18:09:47 +03:00
Rejeesh Kutty 6548bcd71f axi_ip- constraints: add rst path 2015-06-04 10:53:13 -04:00
Rejeesh Kutty e7470036bf library- drp moved to up clock 2015-06-01 13:39:26 -04:00