905e29eb01
hdlmake- altera
2016-10-10 12:55:55 -04:00
e5cf417576
daq2/mb- xcvr procedures
2016-10-10 12:51:30 -04:00
273073a584
daq2/kcu105- xcvr procedure
2016-10-10 11:12:47 -04:00
b3d3876dc5
imageon: ZC706, updated system_top to remove part of the Warnings.
...
- constraints fixed so Vivado doesn't issue a Warning
2016-10-10 17:33:42 +03:00
9efc45f0b6
imageon: Zed, updated system_top to remove part of the Warnings.
...
- spi csn signals should be tied to 1 if spi is not used
- constraints fixed so Vivado doesn't issue a Warning
2016-10-10 17:31:25 +03:00
8875c5bef3
fmcomms6: ZC706, updated system_top to remove part of the Warnings
2016-10-10 16:43:23 +03:00
fcd56a2f90
daq3/a10gx: Update project to the new GT framework
...
- Update common script
- Update system_top, some port names were changed
- Update constraint files
2016-10-10 16:22:08 +03:00
94f55f20e9
adv7511: KCU105, updated system_top to remove part of the Warnings
2016-10-10 16:12:17 +03:00
f464497062
cn0363: Microzed, updated system_top to remove part of the Warnings
2016-10-10 16:08:59 +03:00
2e605fc060
cn0363: Zed, update system_top to remove part of the Warnings
2016-10-10 15:56:46 +03:00
a12d34a98b
adv7511: Zed, updated system_top to remove part of the Warnings
2016-10-10 15:54:34 +03:00
c737afebf8
adv7511: KC705, updated system_top to remove part of the Warnings
2016-10-10 13:24:40 +03:00
74faac9210
ad9467_fmc: KC705, updated system_top to remove part of the Warnings
2016-10-10 13:19:55 +03:00
ffaf78665f
daq2- xcvr procedures
2016-10-06 14:44:20 -04:00
3b55822db3
daq2- xcvr connect
2016-10-06 14:09:27 -04:00
721ee98a06
zcu102- misc fixes
2016-10-06 10:18:14 -04:00
8965bcffb7
make: Update make files for DAQ3
2016-10-06 10:27:00 +03:00
9ace02a227
daq3/a10gx: Update project to the new GT framework
2016-10-06 10:25:25 +03:00
58c4abd8af
daq3/kcu105: Update project to the new GT framework
2016-10-06 10:23:52 +03:00
ca4dca87e2
daq2- updates
2016-10-05 14:02:59 -04:00
baabe20766
common/zcu102- spi connections & clock
2016-10-05 14:01:59 -04:00
bab9b2df0b
daq3/zc706: Update project with the new transceiver modules
2016-10-05 17:41:25 +03:00
c196b5bf68
ad6676evb: VC707, fixed system top gpio_bd datawidth
2016-10-05 15:50:43 +03:00
0208335ef3
hdlmake- updates
2016-09-30 13:20:22 -04:00
27c9bdddb6
daq2/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
8e1034946f
fmcomms2/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
9afff7ae60
common/zcu102- 2016.2 updates
2016-09-30 11:55:10 -04:00
33f9ed33c7
projects- ultrascale+
2016-09-30 11:55:10 -04:00
0ded52d8f6
daq2/zcu102- kcu105 copy
2016-09-30 11:55:10 -04:00
7290bcc81a
hdlmake- updates
2016-09-29 11:50:58 -04:00
4950c6c773
adrv9371x - xcvr updates
2016-09-29 11:50:58 -04:00
4a5b7fc723
scripts- reconnect added
2016-09-29 11:50:58 -04:00
e40311eee9
adrv9371x: A10soc, connected DMAs through 128 bit SDRAM0 port at 175MHz
2016-09-29 09:14:37 +01:00
4239f64125
dacfifo- board pin warnings
2016-09-27 14:49:20 -04:00
751a66eb72
plddr3/zc706- board pin warning
2016-09-26 15:20:37 -04:00
79b9e21be8
board- xcvr procedure
2016-09-26 15:20:18 -04:00
8314efd4e9
fmcomms11- xcvr updates
2016-09-26 15:19:29 -04:00
7fd9280cbf
fmcomms11- xcvr updates
2016-09-26 15:19:05 -04:00
f5809b8817
adrv9371x: a10soc, added adcfifos; connected the new reset to all peripherals; used the new f2sdram1 port
2016-09-24 10:09:05 +03:00
2d307d5f58
a10soc: Added system reset bridge. Using F2SDRAM port used in the previous Qsys design
2016-09-24 10:06:35 +03:00
df37a23a48
pzsdr/ccfmc- rgmii critical warnings fix
2016-09-22 11:38:43 -04:00
dc6f7bbc4e
pzsdr/ccfmc - loopback updates
2016-09-22 11:18:13 -04:00
0e2572bbd8
pzsdr- ccbrk_cmos- loopback changes
2016-09-21 13:16:04 -04:00
14ad1ea741
pzsdr- swap clear-up
2016-09-21 13:15:40 -04:00
21b5e9c634
hdlmake- updates
2016-09-21 11:56:03 -04:00
143423e3b9
adrv9371x: A10SOC, fix Makefile and system scripts to be compatible with altera
2016-09-21 18:13:02 +03:00
500d8bfb90
adrv9371x: A10GX, fix makefile and system_qsys.tcl script
2016-09-21 18:11:35 +03:00
79f34c9de7
ccbrk- test updates
2016-09-21 11:04:22 -04:00
a2e60cf693
ccbrk - test
2016-09-21 11:04:22 -04:00
3ca9fe0919
sdrstk- remove critical warnings from ps7
2016-09-16 14:06:12 -04:00
f1e787f86b
fmcomms2: TDD control is enabled by default
2016-09-16 14:45:39 +03:00
2a7bc31c01
pzsdr1- disable gpreg constraints
2016-09-15 13:49:04 -04:00
67d4e71ff0
pzsdr1- disable gpreg constraints
2016-09-15 12:41:40 -04:00
16ee1336c3
Makefile: Update make files
2016-09-15 11:41:06 +03:00
631923e9f0
usb_fx3: Update to Vivado 2016.2
2016-09-14 15:41:27 +03:00
9118ca3986
version_upgrade: Update MOTCON2 to 2016.2
2016-09-14 10:58:06 +03:00
cf9ac730a8
pzsdr1- new rev. board delays
2016-09-13 10:32:13 -04:00
9a2d2e8a02
version_upgrade: Update FMCADC4 to 2016.2
2016-09-13 15:04:11 +03:00
236a938425
daq2/a10gx- qsys updates
2016-09-12 14:57:50 -04:00
5df30ac6b0
daq2/a10gx- xcvr sharing
2016-09-12 14:57:50 -04:00
521c41ce32
adrv9371x: Updated a10soc project. Common design differentiates between nios and a10soc carrier
2016-09-08 11:44:45 +03:00
40c9fc92c1
a10soc: Switched to tcl flow
2016-09-08 11:31:06 +03:00
0d095f5da9
a10gx: Added system_type variable in common design
2016-09-08 11:29:14 +03:00
bae63ae5b1
version_upgrade: Update the DAQ3 project to 2016.2
2016-09-06 11:41:37 +03:00
b8c34791d5
version_upgrade: fmcjesdadc1 updated to 2016.2
...
Xilinx IP core JESD204 is updated to version 7.0
2016-09-06 11:41:37 +03:00
b837883b98
pzsdr1/pzsdr1/pzsdr1_cmos_system_constr: Fixed voltage level selection
2016-09-01 17:16:59 +03:00
93fa5aeec3
fmcadc2/vc707: Add adf4355 access, update design to Vivado 2016.2
2016-09-01 16:11:39 +03:00
dc21384002
pzsdr: Update ccpci base design
2016-09-01 09:06:30 +03:00
2f9ac4a342
altera- qsys-script does not support most tcl commands
2016-08-30 11:50:36 -04:00
917da79da1
altera- source defaults for qsys-script
2016-08-30 11:50:36 -04:00
8192e755e1
altera- defaults
2016-08-30 11:50:36 -04:00
1eccf5af07
fmcomms7: Update common design to Vivado 2016.2
2016-08-30 16:46:15 +03:00
2015bcedaa
fmcadc2: Update common design to Vivado 2016.2
2016-08-30 16:42:58 +03:00
6f0d124861
fmcadc5: Update to Vivado 2016.2
2016-08-30 16:09:28 +03:00
4248b9373a
ad6676evb: Update to Vivado 2016.2
2016-08-30 16:08:07 +03:00
a6e6b3f96e
version_upgrade: Update fmcomms1 common design to Vivado 2016.2
2016-08-29 15:59:15 +03:00
2e59f377e1
version_upgrade: Update ac701, mitx045 and zed common design to Vivado 2016.2
2016-08-29 09:50:46 +03:00
271029768c
pzsdr/cmos - swap==1
2016-08-26 10:31:00 -04:00
d18f6aa816
adrv9371x: A10GX, added adcfifo
...
- connected dac dma to 133 MHz clock
- set explicit clock rate to xcvr reference clock bridge
2016-08-26 14:46:48 +03:00
5cc2ab37a5
version_upgrade: Common ZC702 get an upgrade to 2016.2
...
Xilinx IP Clock Wizard updated to version 5.3
2016-08-26 10:20:04 +03:00
cd0c981b50
projects/scripts: Fix to prevent a warning
...
In case of axi_interconnects, when just one slave and master interface is
active, the 'Interconnect Optimization Strategy' is disabled. So this
parameter should be set just if there is more than one slave interface.
2016-08-26 10:08:00 +03:00
6ab137a0e9
projects/scripts: Cosmetics
2016-08-26 10:07:08 +03:00
9dfcfe6146
version_upgrade: adv7511 common script to 2016.2
...
Xilinx IP Clock Wizard updated to version 5.3
2016-08-26 09:52:01 +03:00
264bde77ad
sdrstk- SWAP==1 option
2016-08-24 12:07:13 -04:00
3c6cfdc7b5
adrv9371x: A10GX, switched TX lanes
2016-08-24 18:06:14 +03:00
215edb11c6
adrv9371: A10GX, updated design
...
- disable reconfiguration for RX transceivers and enabled the reconfiguration for TX transceiver. They cannot be enabled at the same time at this point
- update FIFO SIZE to 16 for all DMAs
- updated memory connections to 256 bit and moved clock connection to 133 MHz, for all DMAs.
2016-08-23 18:25:48 +03:00
320f87d63b
sdrstk- fix spi/port connections
2016-08-22 16:52:43 -04:00
270f8a6bbe
adrv9371x: Updated project common
2016-08-22 16:58:21 +03:00
f1b834ab25
scripts: Update script so that all interconnects are optimized for performance
2016-08-22 16:56:02 +03:00
c6b065c349
zc706: Updated DDR3 dacfifo
2016-08-22 16:48:52 +03:00
f697490de6
hdlmake- updates
2016-08-19 15:59:41 -04:00
5c35012f54
sdrstk- updates
2016-08-19 15:59:13 -04:00
8582517712
sdrstk- updates
2016-08-19 15:56:48 -04:00
67bf8f8e78
scripts- fix path and device defaults and override
2016-08-19 15:56:07 -04:00
6ef9555909
sdrstk- added
2016-08-19 13:45:40 -04:00
41203d07e9
adrv9371x: A10GX, update SPI connection
2016-08-18 17:42:27 +03:00
03c83b59bf
adrv9371x/a10soc: Export axi_ad9371_s and xcvr_reconfig_avmm
2016-08-17 19:03:53 +03:00
5d0e08d92e
common/vc707- 2016.2 version
2016-08-17 10:36:19 -04:00
73413366bc
daq2/all - warnings fix
2016-08-17 10:36:00 -04:00
0b6fbf2208
daq2/vc707- 2016.2 updates
2016-08-17 10:34:06 -04:00
ce1fed1ce6
dmafifo- adc/dac split
2016-08-16 12:54:39 -04:00
0694a5015d
kc705- 2016.2 version
2016-08-16 12:54:39 -04:00
8311098384
daq2/kc705- adxcvr changes
2016-08-16 12:54:39 -04:00
8464816c82
dmafifo-split to adc/dac
2016-08-16 12:54:39 -04:00
eb55f600fb
adrv9371x: Initial commit
...
-need to fix dc filter module for AD9371 / altera
2016-08-16 15:50:46 +03:00
5c27ccd1fa
adrv9371x: Added common qsys tcl
2016-08-16 15:34:10 +03:00
4658686ae1
adrv9371x/a10soc: Misc changes for being able to run Linux
2016-08-16 11:56:25 +03:00
39c1c83d00
adrv9371x/a10soc: Fix spi_csn assignment
2016-08-12 10:07:11 +03:00
0b0aa8e6c0
Makefile: Add MMU option to altera makefiles
2016-08-11 17:46:54 +03:00
5d93e542ed
daq2-kcu105: 2016.2 updates
2016-08-11 10:00:41 -04:00
16ad0f4379
kcu105- 2016.2 update
2016-08-11 10:00:41 -04:00
285059aed0
kcu105: Don't use phy reset automation, as it's not supported for KCU105
2016-08-09 10:19:57 +03:00
452d4706d3
kcu105: Update base project to 2015.4.2
...
- change part to revision 1.1 of the board
2016-08-09 10:19:36 +03:00
c6f4def93d
altera- make mmu a make switch
2016-08-08 11:54:51 -04:00
0cd608a7e2
lib_refactoring: Update Make files
2016-08-08 16:38:38 +03:00
df36902713
lib_refactoring: Fix path of the IO macros
2016-08-08 15:07:19 +03:00
f784557895
lib_refactoring: IOBUF is a Xilinx macro, no need to use with Altera
2016-08-08 15:06:34 +03:00
8f61e11a70
pzsdr: ccpci: Add PCIe reset monitor
...
For reliable and correct operation it is vital that the FPGA is fully
configured and up and running before the PCIe host de-asserts the reset.
Add a small logic circuit that detects de-assertion of the reset signal
that can be used to verify that the reset de-assertion was seen by the
FPGA.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
91782989ad
pzsdr: ccpci: Set IO standard to LVCMOS33 for banks 12 and 13
...
The IO voltage for bank 12 and 13 is 3.3V on the PCIe carrier. Set the
IOSTANDARD of the pins on these banks accordingly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
418217dd10
pzsdr: Remove LED and button signals from PCIe carrier
...
Only the FMC carrier and the breakout board do have push buttons and LEDs.
They are not present on the PCIe carrier. So move the constraints to a
separate file that can be included by the projects that need them and
remove all LED and button related signals from the PCIe project.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:31:40 +02:00
3cff0fa7dc
pzsdr: ccpci: Use PL SPI and GPIO peripherals
...
To be able to access the GPIO pins and the SPI port through the PCIe bridge
we need to use the PL SPI and GPIO controllers rather than the PS
controllers. Adjust the sytem_top.v accordingly so that the PL peripherals
are connected to the external pins.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-08-05 18:29:42 +02:00
d60bce654c
Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools
2016-08-05 15:16:04 +03:00
e42b4ea378
hdlmake- updates
2016-08-04 13:28:25 -04:00
ed9e92621c
daq2- spi+xcvr address conflict
2016-08-04 10:50:31 -04:00
999eccc134
daq3: Update A10GX project to Quartus 16.0
2016-08-01 16:19:43 +03:00
9a563de8ff
daq2: A10GX updated project to Quartus 16.0
...
- connected directly axi_ad9680 to xcvr_core, skipping axi_jesd_xcvr
2016-08-01 15:09:53 +03:00
52ae3ddd6c
a10gx: Updated common files to 16.0
2016-08-01 15:08:12 +03:00
7ca8e10004
make: Update Make files
2016-08-01 14:24:48 +03:00
af4c43b6e1
hdl-vivado-2016.2: Update fmcomms2 and pzsdr base design
2016-08-01 13:49:12 +03:00
fbe3d75eb0
cosmetics: Delete trailing whitespace characters
2016-08-01 13:46:46 +03:00
9952a94efb
hdl-vivado-2016.2- ip version updates
2016-07-28 13:44:57 -04:00
6ffe59728b
hdl-vivado-2016.2- update
2016-07-28 13:44:57 -04:00
3b2bde2fa1
hdl-vivado-2016.2- min. addr-space requirement
2016-07-28 13:44:57 -04:00
08f4ba24d5
usb_fx3: Switch PS7 UART to UARTLITE to communicate with the FX3 board
2016-07-28 15:21:38 +03:00
39a5534e00
hdlmake- updates
2016-07-21 16:10:38 -04:00
6df5ba1a7a
daq2- adxcvr version
2016-07-21 16:09:33 -04:00
4532e5c0cb
fmcomms11- support iq mode
2016-07-21 11:58:03 -04:00
c75289be21
fmcomms11- use qpll tx-12g5, cpll rx-6g25
2016-07-19 16:21:49 -04:00
d6243f3d01
update in fmcomms11 tcl and clock constrains
2016-07-18 09:04:13 -04:00
44d9f98e12
adi_project.pl: Fix ADI_NO_BITSTREAM_COMPRESSION detection logic
...
Only enable bitstream compression only if both the
ADI_NO_BITSTREAM_COMPRESSION environment and TCL variable are not set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 10:44:42 +02:00
62c7114d77
Enable bitstream compression for Xilinx projects
...
Enabling bitstream compression reduces the size of the generated bitstream.
This means on one hand it will consume less storage, which is especially
useful for the BOOT partition of the ADI images where we store BOOT.BIN
files for all supported platforms.
On the other hand a smaller bitstream is faster to load from the storage
medium and it is also faster to program to the FPGA. So it reduces the
overall boot time as well.
The only downside of bitstream compression is that the bitstream size is no
longer constant, but depends on the actual design and resource utilization.
This will not work with bootloaders that expect a fixed size.
When building a bitstream using the tcl scripts bitstream compression can
be disabled by setting the ADI_NO_BITSTREAM_COMPRESSION environment
variable.
Initial tests show a reduction of a round 50% in size for most ADI
projects.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-07-14 10:16:15 +02:00
12abe2b6b9
fmcomms2: Makefile update
2016-07-12 09:39:24 +03:00
283bf9ad75
fmcomms2_a10GX: Add fmcomms2 on a10gx
2016-07-11 18:37:18 +03:00
e9fe752b7a
fmcomms2_qsys.tcl: Add fmcomms2 block design script for Altera
2016-07-11 18:34:21 +03:00
92c580a84d
daq3: A10GX, updated project to the TCL flow
2016-07-08 12:00:37 +03:00
7be017baa3
daq1: Add AXI PLDDR FIFO to the receive path
...
The AD9684 has two 500 MSPS converter, the system can not handle this
throughput without a FIFO.
2016-07-07 07:15:54 +03:00
9169e20b5e
daq1: Fix the data width on the DMAC interfaces
...
+ HP ports maximum width is 64 bits
+ DMAC's default width is 64, no need for redefinition
2016-07-07 07:15:54 +03:00
48762519b5
make updates
2016-07-06 15:02:00 -04:00
427cc84bb2
axi_ad7616: Rename the physical interface signals to rx_*
...
No functional modification.
2016-07-01 14:45:23 +03:00
69a68a99e0
imageon/zed - remove onboard hdmi and update design
2016-07-01 14:11:49 +03:00
ad491ec04a
updated tcl files after inclusion of ad9162 core
2016-06-30 13:26:16 -04:00
c6c3622816
a10gx: Updated common design adding explicit clock frequency and synchronous reset deassertion
2016-06-30 10:59:29 +03:00
8d558b2538
make: Update Make files
2016-06-29 14:50:07 +03:00
e6494b9a74
axi_ad7616: Change the DMA interface type to Write FIFO
2016-06-29 14:11:02 +03:00
64633e519c
Merge remote-tracking branch 'origin/dev_ad7616' into dev
2016-06-29 12:32:39 +03:00
2e80dec513
adrv9371x/zc706: Update project with the new axi_dacfifo
2016-06-22 12:33:47 +03:00
67c948e821
fmcomms2/a10soc-- bad board design
2016-06-14 12:29:36 -04:00
8f48a5520a
makefile updates
2016-06-10 14:26:46 -04:00
eaf4d4a19d
makefile updates
2016-06-10 14:26:14 -04:00
1746701d45
fmcomms11- updates
2016-06-10 14:20:43 -04:00
509f031d58
fmcomms11- updates
2016-06-10 14:20:43 -04:00
fdc1240cc8
fmcomms11- spi
2016-06-10 14:20:43 -04:00
8f00760c13
fmcomms11- initial commit
2016-06-10 14:20:43 -04:00
f84fafaaac
adrv9371x/zc706: Fix system top
...
The dac_fifo_bypass gpio is an internal gpio only. No need for IOBUF.
2016-06-10 10:11:27 +03:00
468800bb38
daq2/a10gx- makefile update
2016-06-07 14:06:42 -04:00
625052f46e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
d53b06849e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
ae1dd1d58e
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
3516ec28b7
daq2/a10gx- qsys updates
2016-06-07 12:28:04 -04:00
3351ff607e
adrv9371x- need to investigate merge with avalon
2016-06-02 16:22:53 -04:00
ebdc7832a7
hdl make updates
2016-06-01 14:00:30 -04:00
bfeebc2791
imageon/zc706- remove onboard hdmi
2016-06-01 13:59:13 -04:00
eca4d4e2a6
imageon/zc706- board updates
2016-06-01 13:59:13 -04:00
c293c04634
hdl make updates
2016-06-01 13:53:09 -04:00
46b464ed72
adrv9371/a10soc- qsys updates
2016-06-01 13:48:51 -04:00
a958ef27da
adrv9371- qsys updates
2016-06-01 13:48:51 -04:00
5b2a90ffff
adrv9371- qsys
2016-06-01 13:48:51 -04:00
af45acfcb9
ad9371- qsys updates
2016-06-01 13:48:51 -04:00
d2fc64d130
daq3/a10gx: updates
2016-05-27 08:37:47 -04:00
d10dd78094
kcu105: Update common design to 2015.4
2016-05-27 14:59:28 +03:00
1853c6921d
adrv9371x/zc706: Fix typo in system_top
2016-05-27 14:13:55 +03:00
a6fbf6c20b
adrv9371x: Update the Makefiles
2016-05-27 14:13:55 +03:00
32d46389f2
adrv9371x: Move GTs AXI interface to HP3
...
If the VDMA and the GTs AXI are connected to the same HP port, the
HDMI won't work on full resolution (1080p). Care should be taken, this can
affect the receive and observation paths (both are connected to HP2).
2016-05-27 14:13:55 +03:00
b452a8e2d4
adrv9371x: Connect bypass and data underflow
2016-05-27 14:13:55 +03:00
3859cba186
adrv9371x/zc706: Add PL_DDR FIFO to the design
2016-05-27 14:13:55 +03:00
d0b40afb45
zc706/common: Fix PL_DDR3 fifo integration script
2016-05-27 14:13:55 +03:00
aca3038919
axi_dacfifo: No overflow for DAC
2016-05-27 14:13:55 +03:00
81ade7f26c
axi_dacfifo: Fix resets
...
DMA side: axi_resetn is used to reset the address counters
DAC side: GT tx_rst is used to reset the last_address register
2016-05-27 14:13:55 +03:00
578376c8fe
axi_dacfifo: Add bypass logic
2016-05-27 14:13:55 +03:00
9c6e80fca2
daq3/a10gx- qsys modifications
2016-05-24 03:15:45 -04:00
39d23032f1
daq2- qsys updates
2016-05-23 10:55:44 -04:00
0d1c4d232e
a10soc- updates-1
2016-05-20 16:14:57 -04:00
09520709b0
make updates
2016-05-20 12:35:45 -04:00
f92e8509bb
adrv9371x- added
2016-05-20 11:46:25 -04:00
50d018fc11
arradio- rfifo/wfifo added
2016-05-18 13:24:13 -04:00
e345953bdd
arradio- updates
2016-05-16 12:19:38 -04:00
72151bb1a6
a10gx: Updated base design to include MMU
2016-05-13 18:44:41 +03:00
f3f5353944
zcu102- updates
2016-05-10 15:40:41 -04:00
16e3a0e569
zcu102- updates
2016-05-10 15:40:41 -04:00
e1350018da
zcu102- updates
2016-05-10 15:40:41 -04:00
a6411dbd63
zcu102- added
2016-05-10 15:40:41 -04:00
e8fbdd0f5d
zcu102: zynq ultrascale
2016-05-10 15:40:41 -04:00
0041bf69be
c5soc- remove unused hps ports
2016-05-09 13:54:08 -04:00
89b20f2a35
c5soc- remove unused hps ports
2016-05-09 13:54:08 -04:00
8d72b645ae
fmcomms2/common: Remove ila_tdd block
2016-05-09 10:28:10 +03:00
b0538a03a2
Make: Update
2016-05-06 16:44:24 +03:00
4863a04132
axi_adc/dacfifo: Split the intergration script file
...
Split the integration script file into two separate script files. Rename the
integration processes names to be more meaningful.
2016-05-05 09:53:55 +03:00
ddfaff2cf5
fmcomms2/a10soc: compile version
2016-05-04 13:42:12 -04:00
f4e5965936
fmcomms2/a10soc: ip updates
2016-05-04 13:42:12 -04:00
92dcce1674
a10soc: default ports
2016-05-04 13:42:12 -04:00
be74db656c
ad6674evb, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1:
...
Update system_project.tcl scripts to correctly select the necessary
constraint files
2016-05-04 19:37:33 +03:00
3ca3414522
fmcadc2: Fixed bus data width
2016-05-04 19:20:01 +03:00
9104b2cc60
ad6676evb, fmcadc2, fmcadc4, fmcadc5,...
...
ad6676evb, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1: Remove unused
set_proprieties
2016-05-04 19:13:25 +03:00
385ed31a45
make files update
2016-04-29 10:17:35 -04:00
61b531b1c1
a10soc device update
2016-04-29 10:17:35 -04:00
160d54f311
ad7616_sdz: Some comment rephrase
2016-04-29 16:41:35 +03:00
664ea16a0f
ccpci- carrier changes
2016-04-27 16:26:11 -04:00
e790e4c3ae
a10soc- complete qsys
2016-04-25 12:56:19 -04:00
bfa6fe2a40
a10soc- updates
2016-04-25 11:23:16 -04:00
28159aeec9
a10soc- updates
2016-04-25 11:11:46 -04:00
0a3967b886
a10soc- updates
2016-04-25 10:53:26 -04:00
d36d1263c5
a10soc- updates
2016-04-25 10:50:09 -04:00
1fd5c0f28b
ad7616_sdz: Fix IO definitions for the parallel interface.
2016-04-25 10:56:45 +03:00
6de356e8fc
ad7616_sdz: Fix the data width at i_iobuf_adc_cntrl
2016-04-25 10:55:37 +03:00
2a5f31d26b
fmcomms2/a10soc- copy
2016-04-22 15:15:44 -04:00
82c4f75f13
a10soc- a10gx copy
2016-04-22 10:39:21 -04:00
7a4a7edfba
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:07:41 -04:00
e00236e5fd
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:04:46 -04:00
8b2542b181
daq2/a10gx: 10AX115S3F45E2SGE3 version
2016-04-20 16:01:12 -04:00
679d471d75
Merge branch 'hdl_2016_r1' into dev
...
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
2016-04-19 18:05:50 +03:00
402253d308
usb_fx3: Updated design to include the GPIF II interface
2016-04-19 15:52:30 +03:00
8a574cd8ba
zc706_system_plddr3.tcl : Add integration process for the AXI_DAC_FIFO
2016-04-19 11:30:52 +03:00
c291f8f107
daq1: Updated design to 2015.4
2016-04-14 23:36:47 +03:00
469b4ea5e8
fmcadc5: Updated design to 2015.4
2016-04-14 23:18:23 +03:00
62bd057106
fmcadc5/common: Update common design to 2015.4
2016-04-14 23:01:38 +03:00
a88ced8136
pzsdr1: lvds/cmos updates
2016-04-11 16:18:29 -04:00
3006c5a223
make updates
2016-04-11 16:14:59 -04:00
736bbdd95a
pzsdr1- io updates
2016-04-11 16:12:21 -04:00
8a5a5082f3
pzsdr1- io updates
2016-04-11 16:12:09 -04:00
8e689f4594
pzsdr1- lvds/cmos constraints
2016-04-11 16:00:18 -04:00
7e807d83b1
pzsdr1- cmos mode
2016-04-11 15:58:29 -04:00
bf6ef4e5f3
board- add disconnect
2016-04-11 15:33:00 -04:00
68bc647472
pzsdr1- ddr board delays update
2016-04-06 15:30:27 -04:00
21208ca208
Makefiles: Update Makefiles
2016-03-31 12:37:47 +03:00
1fab6ce477
daq2/common: Add util_dacfifo/dac_xfer_out control
2016-03-29 16:55:33 +03:00
255b0ebd40
util_dacfifo: Add dac_xfer_out control
...
The dac_xfer_out control signal is asserted while the DAC reads back data. Should be connected to upack/dma_xfer_in.
2016-03-29 16:50:00 +03:00
657144d9a7
a10gx: Updated base design and DAQ2 to the new revision of the a10gx board
...
- tried using ATX PLL and fPLL for TX transceiver clocks, but could not get them to lock
- CMU PLL works correctly as temporary solution
2016-03-28 13:21:36 +03:00
7ce3f6e274
ad7616_sdz: Fix system top for parallel interface mode.
2016-03-24 13:49:30 +02:00
a1c2c61884
ad7616_sdz: Update the IOBUF instance names
2016-03-24 11:46:33 +02:00
7c2f34549b
motcon2_fmc: Update common design to 2015.4
2016-03-23 10:27:07 +02:00
373481360b
util_dacfifo: Add a bypass option to the FIFO
2016-03-21 14:14:43 +02:00
714caa964c
usdrx1: Update common design to 2015.4
2016-03-18 16:29:43 +02:00
05f4f3ac09
usb_fx3: Update common design to 2015.4
2016-03-18 16:16:38 +02:00
24fdd2b9b7
pzsdr/ccpci: Update common design to 2015.4
2016-03-18 15:30:10 +02:00
f8b155faab
pzsdr/ccfmc: Update common design to 2015.4
2016-03-18 15:28:56 +02:00
d567af54ef
imageon: Update common design to 2015.4
2016-03-18 15:27:31 +02:00
995debedce
fmcomms2: Update common design to 2015.4
2016-03-18 15:26:52 +02:00
b555be25d5
kcu105: Update common design to 2015.4
2016-03-18 15:22:42 +02:00
412013d939
adv7511: Update common design to 2015.4
2016-03-18 15:01:25 +02:00
d355aa0ea6
daq3/zc706: Updated design to 2015.4
2016-03-17 11:46:48 +02:00
012b095006
daq3: Updated common design to 2015.4
2016-03-17 11:44:27 +02:00
38c3f7474a
ad6676: Updated common design to 2015.4
2016-03-17 11:40:46 +02:00
abc03fff2c
fmcomms7: Updated design to 2015.4
2016-03-17 09:11:41 +02:00
59c726ecbe
fmcjesdadc1: Updated common design to 2015.4
2016-03-16 10:14:06 +02:00
1a3aab0c13
fmcomms1: Updated common design to 2015.4
2016-03-16 10:09:54 +02:00
b7be089b82
daq2: Updated common design to 2015.4
2016-03-16 10:02:42 +02:00
697469ee28
daq1- updates
2016-03-15 12:39:38 -04:00
334fce03a3
fmcadc4/zc706: Updated design to 2015.4
2016-03-15 15:28:11 +02:00
e8dd5f9788
fmcadc4: Updated common design to 2015.4
2016-03-15 15:27:25 +02:00
98cc7dad7d
fmcadc2: Updated common design to 2015.4
2016-03-15 15:26:05 +02:00
ceea7f25b2
fmcomms2: Updated common design to 2015.4
2016-03-15 15:23:20 +02:00
6f03998b95
zc702: Updated common design to 2015.4
2016-03-15 15:21:22 +02:00
a0c5f46940
zed: Updated common design to 2015.4
2016-03-15 15:20:46 +02:00
9a258d5e4c
vc707: Updated common design to 2015.4
2016-03-15 15:20:02 +02:00
bcf5bd8137
mitx045: Updated common design to 2015.4
2016-03-15 15:18:31 +02:00
27f5f1dcbe
kc705: Updated common design to 2015.4
2016-03-15 15:17:53 +02:00
eb743e0e03
ac701: Updated common design to 2015.4
2016-03-15 15:17:02 +02:00
d282064103
zc706: Updated common design to 2015.4
2016-03-15 15:16:36 +02:00
71be9519ec
adi_project.tcl: Updated to 2015.4
2016-03-15 15:03:50 +02:00
33b265a742
Makefile: Update Makefiles
2016-03-14 09:31:17 +02:00
561412e322
pzsdr-cmos swap
2016-03-11 11:25:58 -05:00
c7ee15d4f4
ccbrk_cmos: cmos mode
2016-03-11 11:25:58 -05:00
c566784ba9
ccbrk_cmos: ccbrk copy
2016-03-11 11:25:58 -05:00
573146aa96
axi_ad7616: Fix the data width of the AXI stream interface
2016-03-10 16:38:53 +02:00
b0f90bd0e8
daq1/cpld: Read interface fix
2016-03-04 20:28:24 +02:00
7e607957ee
daq1.cpld: Prevent the spi_counter to roll over.
2016-03-04 20:28:22 +02:00
262a42c676
daq1/cpld: Update CPLD_VERSION value
2016-03-04 20:28:20 +02:00
9439862301
daq1/cpld: Update CPLD
...
Change to control line fpga_to_cpld to cpld_to_fpga, this is not a functional change.
2016-03-04 20:28:18 +02:00
3466f21f8e
pzsdr add cmos/lvds support
2016-03-04 10:39:48 -05:00
18f30c8dc8
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
a2374f64bf
pzsdr- cmos/lvds split
2016-03-04 10:39:48 -05:00
977d9d0624
Merge branch 'hdl_2015_r2' into dev
...
Conflicts:
projects/daq1/common/daq1_spi.v
2016-03-02 13:52:15 +02:00
40fb68dfd5
ad9265, ad9434, ad9467, daq1, daq2, daq3, fmcadc2, fmcadc4, fmcadc5, fmcjesdadc1, fmcomms6, fmcomms7, usdrx1: updated common spi module so that spi streaming is possible
2016-03-02 13:39:37 +02:00
becc23a69b
daq2: Modified common spi module so that spi streaming is possible
...
- stop incrementing spi_count after the instruction cycle
2016-03-01 17:25:58 +02:00
f7e490c2b3
hdlmake.pl updates
2016-02-26 13:46:11 -05:00
e012d0519b
Merge remote-tracking branch 'origin/hdl_2015_r2' into dev
2016-02-26 13:39:39 -05:00
f6e64e42b0
kcu105: add ethernet idelaycntrl
2016-02-26 13:19:49 -05:00
59313f3c90
daq1: ADC DMA must be in none-cyclic mode
2016-02-24 14:37:19 +02:00
c0a559a9b1
daq1: Fix some typos in the SPI wrapper
2016-02-24 14:31:56 +02:00
8ccd8d87bb
daq2: A10GX, increase analog/digital reset durations
...
- reset the xcvr_rst_cntrl only from the axi_jesd_xcvr
- checked separate RX/TX reset per channel
2016-02-23 11:41:38 +02:00
89f7aadfb1
fmcjesdadc1: A5GT, connected xcvr_rxt_cntrl reset input to the axi_jesd_xcvr reset output
...
This will allow for the transceivers to be reset by the axi_jesd_xcvr core
2016-02-23 11:31:07 +02:00
4fb6589b2d
pzsdr/ccfmc: add fan controls
2016-02-19 16:40:54 -05:00
377461e0d4
Merge branch 'hdl_2015_r2' into dev
2016-02-19 14:15:27 +02:00
0f37dd6424
fmcjesdadc1: Fixed project
...
- changed system_project.tcl so that all base designs to be included
- changed DMA properties to take into consideration the new parameter names
- changed reset bridges to asynchronous
- increased maximum burst size of the DMA bridge
- changed the data_width of the memory bus to 256, as with 512 timing violations may occur
- changed base addresses for the base system to be the same as in the previous release
2016-02-19 14:09:57 +02:00
ce760eb691
fmcadc2- add adf4355 access
2016-02-18 16:17:33 -05:00
d94f157454
arradio: Changed ADC/DAC DMA address length to 24 bit
2016-02-16 15:27:51 +02:00
43e03ca6f7
arradio: Updated project
...
- made the reset bridges asynchronous
- connected the arradio gpio to the CPU interconnect
2016-02-16 14:50:23 +02:00
5518c47ca4
daq1_cpld: Set Input and tristate I/O termination mode to FLOAT
2016-02-15 19:27:59 +02:00
051ac307e6
daq1_cpld: Do not forward the first eight clock cycles of fmc_spi_sclk to sclk
2016-02-15 19:26:58 +02:00
9370246cfa
daq1: Fix bugs on CPLD design
...
Fix the CSN forwarding.
2016-02-12 16:59:09 +02:00
5ed2c0b599
daq1: Update CPLD constraints file
2016-02-12 16:54:36 +02:00
aa2ff0223a
daq1: Update CPLD design
...
+ SPI counter counts on negative edge of the SPI_CLK
+ Shift register for read, shifting MSB first
+ Fix write access logic
+ Update the internal register addresses
2016-02-12 14:45:18 +02:00
c32d7147d5
daq1 : There is a single CSN from master
2016-02-12 14:38:32 +02:00
9675df15c6
daq1_zc706: Update constraints file
2016-02-12 14:37:02 +02:00
e381d5170c
util_tdd_sync: Update the synchronization interface
...
Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-12 14:27:37 +02:00
61f9f72a75
fmcjesdadc1: Updated VC707 project for maximum throughput from DMA to DDR
...
- Increased the DMAs internal FIFO
2016-02-09 12:30:56 +02:00
c431adb793
fmcjesdadc1: Updated KC705 project for maximum throughput from DMA to DDR
...
- Increased the DMA internal FIFO
2016-02-09 12:00:27 +02:00
ad9ecbbbb6
daq2: Updated a10gx project to quartus 15.1.1
2016-02-05 17:43:05 +02:00
a74e2061e9
ad7616_sdz: BUSY is input for the FPGA
2016-02-03 14:12:00 +02:00
bb62f6d225
pzsdr1- updates
2016-02-02 12:34:09 -05:00
41b6ebeeaf
pzsdr1- updates
2016-02-02 12:33:55 -05:00
b147e9c94a
pzsdr1- updates
2016-02-02 12:33:01 -05:00
59783f6cff
ad7616_sdz: Add support for Zedboard
2016-01-29 15:28:06 +02:00
122667259f
ad7616_sdz: Update Make file
2016-01-28 14:48:44 +02:00
118577f64f
ad7616_sdz: Add support for parallel interface
2016-01-28 12:38:22 +02:00
170295161f
pzsdr1- xdc
2016-01-26 11:19:00 -05:00
cd43ebd8bc
axi_ad7616: The OP_MODE parameter is no longer required
2016-01-26 11:05:33 +02:00
bcac3eef4d
pzsdr1- initial commit
2016-01-25 16:07:33 -05:00
44a382fc69
pzsdr1-added
2016-01-25 15:33:34 -05:00
2a17ce275c
axi_ad7616: Control inputs are controlled through GPIO
...
The following control inputs are controlled through GPIO: reset_n, seq_en, hw_rngsel, chsel, crcen, burst and os.
2016-01-25 17:50:50 +02:00
e22d5d5c18
daq2: Fix clock constraints for KC705 and VC707
2016-01-22 19:09:57 +02:00
59fbd99fdb
fmcjesdadc1: Added clock constraint for the ADC path
2016-01-22 15:46:20 +02:00
dca39c26f9
ad6676evb: Added clock constraint for the ADC path
2016-01-22 15:45:16 +02:00
9cd0378003
fmcadc2: Added clock constraint for the ADC path
2016-01-22 15:44:04 +02:00
aa77af6bdf
daq1_cpld: Add ISE project file
...
This file, along with the project source files, is sufficient to open and implement in ISE Project Navigator.
2016-01-21 18:05:59 +02:00
14f7027793
ad7616_sdz: Move the context switching to system_project.tcl
2016-01-19 11:34:28 +02:00
8c69c9d2ce
daq1_zc706 : Update the project
...
+ Add AD9684 to the block design
+ Update the IO definitions
+ Update the CPLD design
+ Add 3wire SPI logic
2016-01-19 11:20:35 +02:00
ab99c4456a
ad9434_fmc: Delete unnecessary set_property call
...
HPx interface is activated by the ad_mem_hpx_interconnect process
2016-01-14 15:41:23 +02:00
c094ab8b52
cn0363: Add support for the MicroZed
...
Add support for connecting the CN0363 to the MicroZed. This works in
combination with the MicroZed Arduino carrier board. The CN0363 needs to be
connected to the PLPMOD header.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
514eb68876
cn0363: Factor out common parts
...
Factor out the common parts of the cn0363 design so we can use it to add
support for other carriers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
d2b26720e6
common: microzed: Add clock, reset and interrupt support
...
In order for the base project to be usable by other projects it needs to
create the clock, reset and interrupt signals that are expected to exist.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
51d20b1a61
adi_project.tcl: Add MicroZed support
...
Handle the projects for the MicroZed and set up the FPGA part accordingly.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:32:26 +01:00
426490c394
common: Rename uzed to microzed
...
Everybody calls the MicroZed microzed in their projects. Don't deviate from
that to avoid potential confusion.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-01-13 20:18:57 +01:00
c397787001
uzed: updates
2016-01-11 15:36:01 -05:00
a610ebb413
uzed: zed-copy
2016-01-11 13:53:22 -05:00
02cc926275
daq1: Add CPLD logic and IO constraints
2016-01-04 18:10:46 +02:00
7013b319b0
motcon2_fmc: Fixed reset connection for cpack cores
2015-12-22 12:03:34 +02:00
17e7d1b86f
ad7616: Add Makefiles
2015-12-21 17:09:42 +02:00
2bb19be3d3
pzsdr/ccfmc: sfp io control
2015-12-17 16:18:06 -05:00
f3fe16a102
pzsdr/ccfmc: camera/sfp pin changes
2015-12-17 16:17:24 -05:00
ea045a3f9a
fmcadc4: change qpll to receive
2015-12-17 12:34:47 -05:00
40ab2f5e6a
ccfmc: tdd/gpio bit moved to the top
2015-12-17 11:37:57 -05:00
34b832e22a
fmcomms6: Fixed reset connection for cpack core
2015-12-16 10:36:33 +02:00
35f6bd16e9
fmcomms5: Fixed reset connection for cpack core
2015-12-16 10:34:36 +02:00
83fd4a53a7
daq3/kcu105: updates
2015-12-14 09:29:48 -05:00
07316a905e
daq3/a10gx: sysref is lvds
2015-12-14 09:29:10 -05:00
ee4d5af12e
ad7616_sdz: Update the project
...
+ Fix system_top.v
+ Finish up the common block design
+ Fix system_project.tcl
2015-12-14 16:02:38 +02:00
f4e3523390
ad7616_sdz: Update IO constraints
2015-12-14 15:34:56 +02:00
6a9d1c431a
daq3/a10gx: updated to a10gx/quartus
2015-12-11 12:49:25 -05:00
da2e1bdc9a
daq2/a10gx: 32bits generic gpio
2015-12-11 11:50:26 -05:00
650d426301
a10gx/base: set gpio to 32
2015-12-11 10:14:37 -05:00
dc84a9ad82
daq3/a10gx: updates
2015-12-10 16:06:14 -05:00
f1b6577447
a10gx/base: separate gpio in/out
2015-12-10 16:04:54 -05:00
d944198212
daq3/a10gx: board updates
2015-12-10 09:45:20 -05:00
1a38ea205d
daq3/a10gx: copy
2015-12-10 09:42:56 -05:00
614babc18e
daq3/kcu105: copy
2015-12-10 09:41:47 -05:00
b0fef1122e
daq3/a10gx: copy
2015-12-10 09:41:37 -05:00
be075379df
hdlmake: updates
2015-12-07 13:11:24 -05:00
0938041d97
ad7768evb: added
2015-12-07 13:07:03 -05:00
6e549171f0
fmcomms5: Connected the clk input of the ad9361 to l_clk
2015-12-02 14:43:44 +02:00
2309c4d83c
Makefiles: Removed " from path
2015-11-27 14:02:46 +02:00
159f6c1216
Makefiles: Updated Makefiles
...
- for altera projects, taken into consideration of the new location for common qsys files
- for fmcomms5, added wfifo dependency
- for daq3, added mfifo dependency
2015-11-27 12:39:42 +02:00
36febf8591
Merge branch 'master' into dev
...
Conflicts:
library/axi_ad9361/axi_ad9361_ip.tcl
library/axi_dmac/Makefile
library/axi_dmac/axi_dmac_constr.ttcl
library/axi_dmac/axi_dmac_ip.tcl
library/common/ad_tdd_control.v
projects/daq2/common/daq2_bd.tcl
projects/fmcjesdadc1/common/fmcjesdadc1_bd.tcl
projects/fmcomms2/zc706pr/system_project.tcl
projects/fmcomms2/zc706pr/system_top.v
projects/usdrx1/common/usdrx1_bd.tcl
This merge was made, to recover any forgotten fixes from master,
before creating the new release branch. All conflicts were reviewed
and resolved.
2015-11-26 13:38:11 +02:00
ea57b3c03c
daq2: A10GX, add project specific IP search paths
2015-11-25 10:58:36 +02:00
e8a595b81e
fmcjesdadc1: Updated a5soc design
2015-11-24 15:39:52 +02:00
fd3910a915
fmcjesdadc1: Updated a5gt design
2015-11-24 15:39:21 +02:00
9281eb2c33
fmcjesdadc1: Updated common altera design
2015-11-24 15:38:58 +02:00
a81625e1fa
daq2: Updated a10gx project
2015-11-24 13:28:53 +02:00
605a0768e0
arradio: Updated c5soc project
2015-11-24 13:27:44 +02:00
a0e67aad56
c5soc: Updated common design
2015-11-24 13:22:01 +02:00
c051a578e5
fmcomms2: Delete unnecessary clock definition
...
The two clocks, rx_clk and ad9361_clk, are the same.
2015-11-20 19:35:37 +02:00
c15c82d9d1
ccpci- remove ps7 ddr hp0 access
2015-11-19 16:42:02 -05:00
4603bd222b
ccpci- set pcie io after ip
2015-11-19 16:42:01 -05:00
95af462409
ccpci- loc by pin-name is ignored
2015-11-19 16:42:00 -05:00
0f8d427aef
ccpci- remove ila
2015-11-19 16:41:58 -05:00
9cfbf0ea61
ccpci- add axi spi/gpio
2015-11-19 16:41:57 -05:00
a1601a03d6
pzsdr: added ad9361 clock out
2015-11-16 15:55:56 -05:00
8aefe569b8
pzsdr: output ad9361 clock out to fan io
2015-11-16 15:54:30 -05:00
597e9eae84
pzsdr: added ad9361 clock out
2015-11-16 15:53:29 -05:00
a6f44949d6
daq3: updates
2015-11-13 13:17:11 -05:00
c88cbf78af
fmcomms5: Added wfifo at the between AD9361 and cpack core
2015-11-13 15:50:32 +02:00
bec4c8da84
pzsdr: Update Make files
2015-11-11 11:16:05 +02:00
2345d29663
fmcomms2: Update make files
2015-11-11 11:15:45 +02:00
a936ad607f
fmcomms2/zc706: Delete unused files from file list
2015-11-11 11:14:58 +02:00
c7e86528d6
fmcomms2/zc706: Cosmetic changes on constraints file
2015-11-11 11:14:16 +02:00
6197a82c80
fmcomms2/common: Add the util_tdd_sync module
2015-11-11 11:07:15 +02:00
5cc97c78d3
Makefiles: Update makefiles to include the nerw axi_gpreg / util_mfifo libraries
2015-11-10 09:32:50 +02:00
ef9bdf6ec9
adi_project: Regenerate the layout of the IP Integrator subsystem design.
2015-11-09 11:01:10 +02:00
214adbfd85
ad7616_sdz_zc706: Add board related IO's to system top.
2015-11-09 10:51:46 +02:00
1d6254fdec
pzsdr/ccbrk: loopback board support
2015-11-06 11:34:21 -05:00
afc4274ee3
common scripts: Changed the resulting hdf file to system_top_bad_timing, if design doesn't meet timing.
2015-11-06 16:01:19 +02:00
0c7c0f2cd8
common scripts: Change the name of the generated HDF if the design doesn't meet timing
2015-11-05 18:41:51 +02:00
11718291cf
pzsdr/ccfmc- add single loopback core
2015-11-05 11:28:38 -05:00
9e27a60478
pzsdr/ccfmc- single loopback core
2015-11-05 11:28:33 -05:00
e36f27b061
daq2: Update A10GX project, with the latest changes.
...
Works with up to 64k samples
2015-11-04 14:54:09 +02:00
83399ef6ee
a10gx: Updated common project to work with Linux (enabled MMU)
2015-11-04 13:35:52 +02:00
27266c59ee
ad7616_sdz: Add project source files
2015-11-03 15:03:35 +02:00
a0039ed4fe
ccfmc: Launch HDMI data on falling edge
...
The ADV7511 captures data on the rising edge, so make sure to launch data
on the falling edge. This fixes some issues with image stability.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-11-03 10:59:13 +01:00
6dddac5d94
ccfmc- missing board io
2015-11-02 15:45:14 -05:00
cafc80c829
fmcadc5: add programmable io delay
2015-11-02 12:10:18 -05:00
8b95520767
pzsdr/ccfmc- add loopback gpio/gt cores
2015-10-30 18:48:26 -04:00
92b7570864
pzsdr/ccfmc- add ad9517 signals
2015-10-30 10:50:53 -04:00
b3cb84cf91
fmcadc5- added ila
2015-10-29 16:48:21 -04:00
24d76c610a
fmcadc5- fix core connections
2015-10-29 16:47:56 -04:00
ac4091e19e
fmcadc4- add monitor fifo
2015-10-27 14:52:02 -04:00
b5d3d0bd13
usb_fx3: Added axi_usb_fx3 core and DMA to the project
2015-10-27 09:41:18 +02:00
748a2bc87a
fmcadc4- add ila for zc706 only
2015-10-23 14:32:35 -04:00
b2d0f5c56e
fmcadc4- use the same source/name for clocks
2015-10-23 14:32:35 -04:00
9d2b8809df
Makefiles: Updated Makefiles
2015-10-23 10:44:27 +03:00
cb2bda48c0
fmcadc5- gt/ip updates
2015-10-19 09:31:32 -04:00
ed918ec119
imageon - keeping scripts happy
2015-10-16 15:04:02 -04:00
e14e9294c5
project-names -- variables causes scripts to fail- too much parsing
2015-10-16 14:13:56 -04:00
36dd6427fe
pzsdr: Add untracked Makefiles
2015-10-16 13:58:36 +03:00
bbdc693954
pzsdr/all: Update Makefile
2015-10-16 11:57:51 +03:00
08777ca566
fmcadc5- latest board changes
2015-10-15 10:46:07 -04:00
030485de28
fmcadc5- regulators need a switching ref clock?
2015-10-15 10:46:07 -04:00
f966f79e5f
fmcadc5- regulators need a switching ref clock?
2015-10-15 10:46:07 -04:00
199227b78c
fix fmcjesdadc1_bd ILA warning
2015-10-13 10:19:08 -04:00
21737ad7b8
fmcomms2/zc706pr: Update the fifo interface of the PR module
2015-10-13 11:37:44 +03:00
c9a5057b93
library/prcfg : Split data bus to channels
...
Because of the new pack/upack modules on the data path, it makes more sense to split the data interface of the PR modules into separate channels.
The top module will supports max 4 channels.
2015-10-13 11:36:45 +03:00
9bb70e2b69
motcon2_fmc: Updated ZED project
2015-10-09 15:33:31 +03:00
83fb5c742a
motcon2_fmc: Updated project to Vivado 2015.2.1
...
- added cpack cores
- removed controller DMA paths
2015-10-09 13:56:41 +03:00
88e8bef92f
usdrx1: Update ZC706 project
2015-10-09 13:33:45 +03:00
02c0a5f5df
usdrx1: Update project to Vivado 2015.2.1
2015-10-09 13:33:07 +03:00
c83239b014
fmcomms2/zc706pr: Update PR design
...
+ Add system_top.v to design
+ Add pr specific constraints
2015-10-09 13:23:42 +03:00
09be227db9
fmcomms2/zc706pr: Update PR design
...
+ Add system_top.v to design
+ Add pr specific constraints
2015-10-09 13:19:09 +03:00
e4517c0d6a
daq2/common: Connect reset to dac fifo
2015-10-08 16:51:08 +03:00
df88b33946
usb_fx3: Initial commit
...
Only the UART connections are available.
The FMC should not be populated at this time
2015-10-02 09:30:31 +03:00
b93af3c21e
daq3- bd updates
2015-09-30 10:11:49 -04:00
81a1c21553
util_pmod_adc: Reset line changed to active low reset.
2015-09-30 12:33:46 +03:00
5f12c8c7d4
cftl_cip/common: Fix parameter names for dmac
2015-09-30 12:32:48 +03:00
3dc881dbb3
pmods/xfest14: Delete directory
...
This project will not be supported from the next release
2015-09-30 12:25:31 +03:00
e6af671bea
cn0363/zed: Fix DMAC parameter names
2015-09-30 11:31:53 +03:00
4aa4ffc25f
imageon/common: Update cores to Vivado 2015.2
2015-09-29 18:51:46 +03:00
e60d2f86b3
imageon/common: Fix parameter name for spdif_rx
2015-09-29 18:50:41 +03:00
b4252a8512
imageon_loopback: Delete directory
...
This project will not be supported from the next releases.
2015-09-29 14:53:44 +03:00
9832cea071
ad9739a_fmc: Common, reduced DMA fifo size
2015-09-28 12:19:23 +03:00
5b48340b08
fmcomms6: Updated ZC706 project
2015-09-28 11:32:20 +03:00
3b3c645827
fmcomms6: Updated project to Vivado 2015.2.1. Added cpack
2015-09-28 11:31:08 +03:00
046c89dacd
fmcomms2/pr: Delete the fmcomms2_pr directory
...
The fmcomms2/pr project is moved to fmcomms2/zc706pr
2015-09-25 19:11:43 +03:00
Rejeesh Kutty
Adrian Costina
Istvan Csomortani
AndreiGrozav
dbogdan
Lars-Peter Clausen
Shrutika Redkar
István Csomortáni
Nicholas Pillitteri