66098b7ae7
util_fir_dec: Update filter, as it's used with ad9361 in CMOS mode
2016-11-10 17:43:04 +02:00
6073cdded4
axi_ad9250: Tie rx_valid to ground
2016-11-10 10:52:37 +02:00
8845aeb6ab
axi_ad9250: Add missing file to Make and script
2016-11-10 10:48:46 +02:00
8493bd4329
axi_ad6676: Update the core, sof interface added
2016-11-10 10:39:33 +02:00
0b58a2a1db
avl_adxcvr- sysclk frequency
2016-11-09 09:21:07 -05:00
48ee720901
avl_adxcvr- a5 requires single transceiver controller
2016-11-08 15:20:01 -05:00
a58597c13a
ad9250 - build fixes
2016-11-08 15:17:54 -05:00
d7357d781b
axi_ad9250 - avalon/axi streaming + sof
2016-11-04 15:30:39 -04:00
ee9c8b884d
avlxcvr- add arria v support
2016-11-04 15:01:19 -04:00
9dc7f16d80
axi_usb_fx3: Added zero length packet capability
2016-11-03 15:29:56 +02:00
1e0fed82f7
alt_serdes- a10 ddio fixes
2016-11-01 12:41:25 -04:00
5eff357568
up_tdd_cntrl: Fix memory map register writes
2016-11-01 10:06:57 +02:00
9f4c5f8060
arradio/ad9361- updates
2016-10-31 15:34:32 -04:00
b94cc8afb1
altera- cmos cores
2016-10-31 13:13:48 -04:00
e0459df0f3
altera -c5 qsys alternative
2016-10-31 11:18:27 -04:00
cc75fa3dfe
altera- java/tcl mess handling
2016-10-31 10:54:07 -04:00
a9d03af771
altera- serdes changes
2016-10-28 14:09:18 -04:00
f2e12cc88f
util_fir_dec: Shifted the output data to the left so that the amplitude remains
...
constant
2016-10-28 15:18:36 +03:00
d9b756e7ad
util_fir_int: Shifted the output data to the left so that the amplitude remains constant
2016-10-28 15:17:30 +03:00
30314e4492
library: Added util_fir_int and util_fir_dec interpolation/decimation filters
2016-10-27 19:31:50 +03:00
8107514dde
altera/common- ad_serdes_clk
2016-10-27 09:41:10 -04:00
f7e3703b98
axi_ad9371- avalon-s interfaces
2016-10-27 09:25:00 -04:00
6f611e0d10
altera/alt_serdes: Add support for Cyclone V
2016-10-25 20:32:51 +03:00
08cef5a745
axi_ad9361: Add Cyclone V SERDES support
2016-10-25 20:24:17 +03:00
5731ba3300
fmcomms11- xcvr updates
2016-10-24 09:51:40 -04:00
de0c487195
axi_ad9684: Add Altera support for the core
2016-10-24 11:43:22 +03:00
3f3606d318
axi_ad9122: Add Altera support for the core
2016-10-24 11:43:12 +03:00
aa46de5e5e
adi_ip_alt: Add ad_generate_module_inst proc
...
Add a tcl process, which can be used to generate custom module
names during the generation phase. This will be used to create
different ad_serdes_clk module, in case when independent IOPLLs are
needed for TX and RX.
2016-10-24 11:43:00 +03:00
707038937a
alt_serdes: Add additional parameters
...
Add additional parameters to keep the top of ad_serdes_* modules
consistant through differente carriers.
2016-10-24 11:42:43 +03:00
8dbfe9258f
axi_ad9162: Delete duplicated port
2016-10-21 13:47:01 +03:00
0beecea02d
util_adxcvr- ultrascale updates
2016-10-19 13:06:10 -04:00
72c05e8635
axi_dmac: Fix constraints for ultrascale
...
Replace "PRIMITIVE_SUBGROUP == flop" with "IS_SEQUENTIAL" as the former is
series7 specific while the later works on all platforms. This fixes the
axi_dmac timing constraints for ultrascale based platforms.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-10-19 14:00:54 +02:00
ecc0addb8c
scripts/adi_ip_alt.tcl: Script is case insensitive for its arguments
2016-10-18 11:25:06 +03:00
bf949f1a88
axi_xcvrlb- xcvr updates
2016-10-17 16:16:57 -04:00
1b3fcb5863
util_adxcvr- parameter defaults
2016-10-17 16:10:57 -04:00
a026d44435
axi_generic_adc: Add missing up_adc_common connections
2016-10-12 13:20:26 +03:00
b543402051
axi_mc_current_monitor: Add missing up_axi connection
2016-10-12 13:20:26 +03:00
91995c082d
axi_ad9684: Fixed up_drp_*data width
2016-10-12 13:20:26 +03:00
a505d304af
Add up_dac_common missing connections
2016-10-12 13:20:26 +03:00
43ee917d53
Add up_dac_channel missing connections
2016-10-12 13:20:26 +03:00
1131be91ed
axi_ad9361: Makefile update
2016-10-11 23:34:13 +03:00
b7767aa18f
xilinx/axi_ad9361_lvds_if: Remove ila
2016-10-11 18:13:45 +03:00
2d93d787ab
altera/ad_cdfilter: Update interface to Verilog 2001 standard
2016-10-11 17:59:21 +03:00
369dad60b0
axi_ad9361: Add Altera SERDES interface support
2016-10-11 17:59:19 +03:00
ae47895666
altera/alt_serdes: Fixed SERDES 4 factor initialization
2016-10-11 17:59:17 +03:00
d41945f568
altera/ad_serdes: Add support for any SERDES factor less than 8
2016-10-11 17:59:14 +03:00
52194f0fea
axi_ad9361: Add DRP connection to the interface module
2016-10-11 17:59:12 +03:00
7194d2eccc
axi_ad9361: Grup interfaces to add support for more carriers
2016-10-11 17:58:49 +03:00
cc6ca4f0f2
ad_lvds_in- ultrascale sim device
2016-10-10 10:39:47 -04:00
121b341b45
axi_spdif_rx: Fixed version register issue. Added sampled_data to sensitivity list
2016-10-10 17:30:13 +03:00
ff980551e6
ad_serdes: SERDES_FACTOR handover missing
...
In modules ad_serdes_in/ad_serdes_out the handover of the parameter
SERDES_FACTOR did not exist, causing unwanted behavioral in case of
factors less than 8.
SERDES_FACTOR must be hand over to DATA_WIDTH parameter of the SERDES
primitive.
2016-10-10 16:38:42 +03:00
f34aa67029
axi_hdmi: Fix a typo
2016-10-10 16:22:18 +03:00
15f36af4c2
axi_ad9152: Update core to support Altera platforms
2016-10-10 16:21:49 +03:00
111adac825
axi_usb_fx3: Updated core
...
- trig signal will reset state machine
- slrd_n delay will be absorbed by the axi_usb_fx3_if module, when Xilinx DMA is not ready to receive data during a packet
- fx32dma_eop signals when the FX3 DMA buffer should be empty. slrd_n set high and sloe_n set low for another two clock cycles
- eot_fx32dma signals the interface that the packet has been fully transfered. No need for watermark signals
- added length_fx32dma and length_dma2fx3 as requested
2016-10-10 10:33:37 +03:00
39fdf11ef3
util_adxcvr- rx/tx clocks
2016-10-05 13:53:02 -04:00
7ec93ce8e0
util_adxcvr: Fix some typo
...
GTHE4_CHANNEL is instantiated in case of XCVR_TYPE == 2
2016-10-05 17:42:12 +03:00
4f587d2e48
util_adxcvr: Delete trailing whitespaces
2016-10-05 17:41:40 +03:00
1b9d2d434c
axi_ad9361_tdd: Delete unused register
2016-10-05 17:41:08 +03:00
ddceff2b5c
axi_usb_fx3: Updated header/footer signature
2016-10-04 16:11:24 +03:00
48dd4880a3
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
0e8551545c
util_adxcvr- ultrascale+ initial commit
2016-10-03 16:11:45 -04:00
b4652650e4
util_adxcvr- xcvr_type parameter
2016-10-03 16:11:45 -04:00
63ddcf1e26
util_adxcvr- synthesis warnings fix
2016-10-03 16:11:45 -04:00
8e0dc859af
axi_usb_fx3: Update
...
- added 1 clock delay for slrd_n signal
- rearrange databytes
2016-10-03 15:17:01 +03:00
43b3761b80
axi_ad9361: Flop the tx and rx valid
2016-10-03 12:24:04 +03:00
8e25bc01b3
all: Change tab to double space
...
Occasional file parsing and restructuring become a pain, if tabs exists
in code. General rule of the repos is tab always a double space.
2016-10-01 18:13:42 +03:00
6b956066ef
xilinx/ad_lvds*- ultrascale+
2016-09-30 11:55:10 -04:00
e9105faae1
library/scripts- add beta devices
2016-09-30 11:55:10 -04:00
c072c2f89a
util_clkdiv: Add IP
2016-09-30 17:13:51 +03:00
7290bcc81a
hdlmake- updates
2016-09-29 11:50:58 -04:00
ffec95f220
ad9371- xcvr updates
2016-09-29 11:50:58 -04:00
b4fac96aad
axi_ad9361- independent disables
2016-09-28 15:45:27 -04:00
f7fb3ccaca
axi_ad9361: Change the data path gating
...
Bring up the datapath gating from the TDD controller module.
2016-09-28 16:36:13 +03:00
df485d7878
axi_ad9684: Fix the PN9 PRBS sequence monitor
2016-09-28 10:47:16 +03:00
9defccef70
dacfifo- axi address map fixes
2016-09-27 14:48:23 -04:00
c98e2e95dd
ad9162- xcvr updates
2016-09-26 15:21:45 -04:00
692cb10fb2
ad9625- xcvr updates
2016-09-26 15:21:11 -04:00
ad16aec101
axi_ad9684: Fix SERDES modules
2016-09-26 11:14:35 +03:00
f6c7aa9005
library- dac parameter changes
2016-09-23 16:15:59 -04:00
1a11e28821
ad9361- dac data path split
2016-09-23 16:13:46 -04:00
6735333aea
common- dac data path split
2016-09-23 16:13:24 -04:00
6837143110
library/ adc parameter changes
2016-09-23 13:44:47 -04:00
7be6168b2e
ad9361- adc data path split
2016-09-23 13:42:14 -04:00
8729af1b91
common- adc- data path disable split
2016-09-23 13:40:35 -04:00
78f7384150
ad9361- vivado synthesis warnings fix
2016-09-22 13:41:18 -04:00
2b6eb1d65e
up_drp: Revert some bit locations
...
Linuxe drivers are checking the drp_locked status even if the
core does not contains a clock generation/managment module. To
not break all the designs, revert all the status and control bits to
there old locations.
2016-09-22 16:32:42 +03:00
21b5e9c634
hdlmake- updates
2016-09-21 11:56:03 -04:00
0def596b43
axi_xcvrlb- updates
2016-09-21 11:04:22 -04:00
d497a7b0ae
axi_xcvrlb- constraints
2016-09-21 11:04:22 -04:00
a21b9fe8ff
up_drp: Fix up_drp_wr
2016-09-21 17:55:58 +03:00
64cd7dc002
axi_ad9122: Update core to the new DRP interface
2016-09-21 16:09:55 +03:00
bae839acd4
axi_ad9739a: Update core to the new DRP interface
2016-09-21 15:23:08 +03:00
781702c1b9
axi_ad9434: Update the core to the new DRP interface
2016-09-21 15:12:59 +03:00
913eafed48
up_drp : Update the DRP interface to support Altera platforms
2016-09-21 15:00:45 +03:00
10408b8c88
up_tdd_cntrl: Set PCORE version to 1.00.a
2016-09-21 10:27:28 +03:00
1860d72df6
axi_xcvrlb- updates
2016-09-19 12:39:59 -04:00
5592c2780e
axi_xcvrlb- loopback version
2016-09-19 12:39:59 -04:00
38f1521861
xilinx/ad_serdes_in : Fix some typos
2016-09-19 16:02:52 +03:00
ff0f659a33
xilinx/ad_serdes_clk : Rename parameter MMCM_DEVICE_TYPE to DEVICE_TYPE
2016-09-19 16:02:06 +03:00
2159f78c80
axi_ad9361: Delete invalid assignment of a generated wire
2016-09-16 17:38:08 +03:00
Adrian Costina
Istvan Csomortani
Rejeesh Kutty
AndreiGrozav
Lars-Peter Clausen
Dragos Bogdan