46fa91d5be
Makefile: Update Make files
2015-07-03 18:08:57 +03:00
6862655b0d
Add .gitattributes file
...
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
ad743c8403
axi_ad9434: This IP core does not have 'data underflow' port
2015-06-18 16:51:42 +03:00
8a1f4bf5f6
ad6676,ad9144,ad9152,ad9234,ad9250,ad9434,ad9467,ad9625,ad652,ad9671,ad9680,ad9739a:Set default driver value for overflow, underflow, gpio_in and dac_sync ports
2015-06-09 14:21:12 +03:00
91b0f70972
library: remove drp cntrl
2015-06-02 09:58:57 -04:00
297e885981
library- drp moved to up-clock domain
2015-06-01 14:52:52 -04:00
660c84e01c
axi_ad9434 : Update the IO delay interface
2015-05-22 19:47:09 +03:00
e918588a4b
library: remove axi-min-size parameter
2015-05-19 13:07:48 -04:00
a61a195e3f
Makefiles: Updated makefiles to add the new constraints as dependecies
2015-04-23 11:16:39 +03:00
ac79c65b81
axi_ad9434: Added CDC and reset constraints
2015-04-23 10:28:46 +03:00
dc2b37bd0c
Makefile: Added top level Makefile. Modified behavior of clean and clean-all
...
Clean ran for a project will clean only the project files.
Clean-all ran for a project will clean also the library files on which the project depends.
The clean commands will only remove specific files and directories.
The top Makefile allows several options(per suggestion from jameyhicks):
make fmcomms1.zed will run "make all" in projects/fmcomms1/zed/
make clean will run "make clean" for all the projects
make clean-all will run "make clean" for all the projects and libraries
make lib will run "make all" for the library files
2015-04-17 17:22:38 +03:00
374f82e7de
makefiles: The clean command for library won't remove the xml files, except for component.xml.
...
Updated also the dmac dependencies
2015-04-16 11:53:27 +03:00
5f8e9a74ea
makefile: updated
2015-04-07 16:32:01 -04:00
f79a152958
Makefiles: updated all makefiles adding clean functionality
2015-04-03 11:57:54 +03:00
43f5025ecd
makefile: added
2015-04-01 16:27:40 -04:00
3dbfa8cda6
ad9434_fmc: Fix PN monitor and device interrupt
2014-10-23 11:29:14 +03:00
4b19646ed9
ad9434_fmc: Fix samples order.
...
Four consecutive samples were reversed.
2014-10-21 16:34:28 +03:00
a436153a48
axi_ad9434: Independent read/write update
...
Independent read/write is supported on "up" interface.
2014-10-07 18:01:44 +03:00
9404e93126
ad9434_fmc: Fix PN monitor.
...
No need to flop the incoming data.
2014-10-07 17:56:27 +03:00
66baf6ac3e
axi_ad9434: Deleted unused ip file
...
ad_lvds_in.v is not used in this ip core.
2014-10-07 17:47:08 +03:00
bfa17844ff
ad_serdes_in: General update
...
Added a parameter for option SDR / DDR mode, added a parameter for parallel data width.
Note: default IF_TYPE is SDR and default PARALLEL_WIDTH is 8
2014-10-07 17:42:27 +03:00
6a09a1ed19
ad9434: Fix the processor read interface
...
Fix the processor read interface, preventing to have nets with multiple drivers. Made a few cosmetic changes in the code too.
2014-09-25 16:51:58 +03:00
ccb0b135ca
ad9434: Fix the adc to dma interface.
...
All the device2dma interfaces needs to have a generic form : (data, enable, valid)/channel
2014-09-25 16:50:09 +03:00
d5f4991e26
ad9434: Merge the ad9434_if interface data outputs into one single bus
2014-09-25 16:45:12 +03:00
079ed0ffb3
ad_serdes_in: Update the serdes_in module
...
Add additional IDELAY block before the ISERDES. Delet the IDDR blocks. Be aware, the ISERDES block are running in DDR mode. If the interface is SDR the maximum parallel data width is 4.
2014-09-25 16:40:29 +03:00
683561b67d
AD9434: Initial check in of the library and project with ZC706
2014-09-24 18:27:17 +03:00
Istvan Csomortani
Lars-Peter Clausen
Adrian Costina
Rejeesh Kutty