Commit Graph

41 Commits (ceb08feee221201707ad4f36dba4263c5c5a99fd)

Author SHA1 Message Date
AndreiGrozav d894c30c2d Remove deprecated/unused parameters
adrv9009
adrv9371x
arradio
daq2
daq3
fmcomms2
fmcomms5
2019-03-30 11:26:11 +02:00
Laszlo Nagy 27f1e4eaed daq3: update adcfifo/dacfifo 2019-01-23 14:45:45 +02:00
Lars-Peter Clausen 1375dcfeaa daq3: Use new pack/unpack infrastructure
Use the new util_cpack2 and util_upack2 cores. They have lower utilization
that the old util_cpack and util_upack cores.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-11-28 11:33:11 +02:00
Laszlo Nagy 4ce153e6e1 all/system_top.v: loopback gpio lines
Create loopback on unused GPIO lines since Linux may rely on it.
2018-10-04 14:19:37 +03:00
Istvan Csomortani a387018f7a daq3:kcu105: Performance_ExploreWithRemap results the highest WNS 2018-08-23 18:41:48 +03:00
Istvan Csomortani 2293374307 adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs
The affected projects are:
  - FMCADC2/VC707 - 16Mb
  - FMCADC5/VC707 - 16Mb
  - DAQ2/ZC706  - ADC@1GB and DAC@8Mb
  - DAQ2/KC705  - ADC@4Mb and DAC@4Mb
  - DAQ2/VC707  - ADC@8Mb and DAC@8Mb
  - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb
  - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb
  - DAQ3/ZC706  - ADC@1GB and DAC@8Mb
  - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb
  - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb
  - ADRV9371x/KCU105 - DAC@8Mb
  - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-21 11:44:05 +03:00
Laszlo Nagy 31318cf311 all/system_top.v: drive unused gpio inputs with zero
The loopback on the unused gpio inputs consumes routing resources
while does not gives any value for the software.

Connect these lines to zero instead.
2018-08-10 17:00:11 +03:00
Laszlo Nagy fa7c85a9eb all: Drive undriven input signals, complete interface
- connect unused GPIO inputs to loopback
- connect unconnected inputs to zero
- complete interface for system_wrapper instantiated in all system_top

fixes incomplet portlist WARNING [Synth 8-350]
fixes undriven inputs WARNING [Synth 8-3295]

The change excludes the generated system.v and Xilinx files.
2018-08-10 17:00:11 +03:00
AndreiGrozav ebae8bf8c1 Remove interrupts from system_top for all xilinx projects
- remove interrupts from system_top
- for all suported carriers:
	- remove all interrupt bd pins
	- connect to GND all initial unconnected interrupt pins
- update ad_cpu_interrupt procedure to disconnect a interrupt from GND
before connectiong it to another pin.
2018-08-10 10:10:58 +03:00
Lars-Peter Clausen 377247a434 Regenerate project Makefiles using the new shared Makefile includes
This reduces the amount of boilerplate code that is present in these
Makefiles by a lot.

It also makes it possible to update the Makefile rules in future without
having to re-generate all the Makefiles.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-04-11 15:09:54 +03:00
AndreiGrozav 51380fbea4 daq3/kcu105: Define transceiver type as Ultrascale
When software configures the system it takes into account the transceiver type.
By default, the XCVR_TYPE is 0 for 7 Series.
2018-04-11 15:09:54 +03:00
Istvan Csomortani 425e803364 license: Fix a spelling mistake 2018-04-11 15:09:54 +03:00
AndreiGrozav 502989c25f jesd_rst_gen:constraints: Remove invalid false path definitions
The constraint where added to remove timing problems on the reset path.

The constraint paths do not match anymore. The resets are used in a synchronous
way so we don't need the timing exceptions anyway.

Projects affected by this change:
  - daq3
  - adrv9739
  - ad6676evb
  - fmcadc5
  - daq2/kcu105
  - fmcadc2
  - adrv9371x
  - fmcomms11/zc706
  - fmcjesdadc1
2018-04-11 15:09:54 +03:00
Istvan Csomortani a740b6012f Make: Use $(MAKE) for recursive make commands
This commit should resolve the issue #64.

Recursive make commands should always use the variable MAKE, not the explicit
command name ‘make’.
2018-03-07 07:40:19 +00:00
Lars-Peter Clausen 0360e8587e Connect JESD204 interrupts
Connect the ADI JESD204 link layer peripheral interrupt signals in all
projects.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-07-05 14:37:50 +02:00
Adrian Costina b7ca17f02b scripts: Change adi_project_create to adi_project_xilinx for creating xilinx projects 2017-06-07 12:06:50 +03:00
Istvan Csomortani 50cdb6db67 Merge branch 'jesd204' into dev 2017-05-31 20:44:32 +03:00
Istvan Csomortani 84b2ad51e2 license: Add some clarification to the header license 2017-05-31 18:18:56 +03:00
Istvan Csomortani 85ebd3ca01 license: Update license terms in hdl source files
Fix a few gramatical error, fix the path of the top level license
files.
2017-05-29 09:55:41 +03:00
Lars-Peter Clausen a38bbb7eb4 daq3: Convert to ADI JESD204
Convert the DAQ3 project to the ADI JESD204 link layer cores. The change is
very straight forward, but a matching change on the software side is
required.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-23 11:16:07 +02:00
Rejeesh Kutty eb7171e212 daq3/kcu105- reorder refclk constraints 2017-05-19 11:41:45 -04:00
Istvan Csomortani 9055774795 all: Update license for all hdl source files
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.

New license looks as follows:

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.

Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
 (at the option of the user):

  1. The GNU General Public License version 2 as published by the
     Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html

OR

  2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
Istvan Csomortani 4eaa43f8e1 daq3: Update IP instantiations 2017-04-21 15:07:41 +03:00
Istvan Csomortani 1c23cf4621 all: Update verilog files to verilog-2001 2017-04-13 11:59:55 +03:00
Rejeesh Kutty fb4a583613 projects/system_bd- adc/dac fifo board designs 2017-02-27 16:06:39 -05:00
Rejeesh Kutty c598e84258 remove processing order (no clock def dependency) 2017-02-22 16:02:08 -05:00
Rejeesh Kutty edd5e9570f file renamed; sed output; fingers crossed 2017-02-22 15:56:37 -05:00
Rejeesh Kutty b14e7fe4ee daq3/kcu105- 1.25GSPS 2017-01-30 10:01:28 -05:00
Rejeesh Kutty 801da3cb25 daq3/kcu105- fix timing violations 2016-12-06 12:31:40 -05:00
Istvan Csomortani 8965bcffb7 make: Update make files for DAQ3 2016-10-06 10:27:00 +03:00
Istvan Csomortani 58c4abd8af daq3/kcu105: Update project to the new GT framework 2016-10-06 10:23:52 +03:00
Rejeesh Kutty ce1fed1ce6 dmafifo- adc/dac split 2016-08-16 12:54:39 -04:00
Istvan Csomortani 0cd608a7e2 lib_refactoring: Update Make files 2016-08-08 16:38:38 +03:00
Istvan Csomortani df36902713 lib_refactoring: Fix path of the IO macros 2016-08-08 15:07:19 +03:00
Adrian Costina d60bce654c Makefiles: Updated Makefiles so they run correctly with gnuwin32 tools 2016-08-05 15:16:04 +03:00
Rejeesh Kutty e42b4ea378 hdlmake- updates 2016-08-04 13:28:25 -04:00
Istvan Csomortani 7ca8e10004 make: Update Make files 2016-08-01 14:24:48 +03:00
Rejeesh Kutty 3006c5a223 make updates 2016-04-11 16:14:59 -04:00
Rejeesh Kutty f7e490c2b3 hdlmake.pl updates 2016-02-26 13:46:11 -05:00
Rejeesh Kutty 83fd4a53a7 daq3/kcu105: updates 2015-12-14 09:29:48 -05:00
Rejeesh Kutty 614babc18e daq3/kcu105: copy 2015-12-10 09:41:47 -05:00