Commit Graph

16 Commits (cfc8ff51e11da382f0bc14c55189ec6bdff61d3a)

Author SHA1 Message Date
Istvan Csomortani 363494ab9c library/scripts: Rename adi_ip.tcl to adi_ip_xilinx.tcl 2019-06-29 06:53:51 +03:00
AndreiGrozav 23841478c6 Remove library/scripts/common_bd.tcl
Remove the script from the file list of the IPs that previously used it.
axi_clkgen: Add independent adi_auto_assign_device_spec proc
2019-04-09 16:07:14 +03:00
AndreiGrozav 7dcaaea04e library: Update scripts/adi_ad_ip.tcl and IPs
Fix library makefiles dep list using generic vendor info reg

Combine adi_int_bd_tcl with adi_auto_fill_bd_tcl procedure.
This change will simplify the process of generating makefiles for each library.
Removing the bd.tcl script from the adi_ip_files list will remove it from the
make dependency list.
2019-04-09 16:07:14 +03:00
AndreiGrozav 4ae5a6d3d8 library/IPs: Auto-generate bd.tcl Update
Remove all bd.tcl and respecting the previous commit, update *_ip.tcl to
auto-generate bd.tcl for:

  - axi_ad5766/axi_ad5766_ip.tcl
  - axi_ad6676/axi_ad6676_ip.tcl
  - axi_ad9122/axi_ad9122_ip.tcl
  - axi_ad9144/axi_ad9144_ip.tcl
  - axi_ad9152/axi_ad9152_ip.tcl
  - axi_ad9162/axi_ad9162_ip.tcl
  - axi_ad9250/axi_ad9250_ip.tcl
  - axi_ad9265/axi_ad9265_ip.tcl
  - axi_ad9361/axi_ad9361_ip.tcl
  - axi_ad9371/axi_ad9371_ip.tcl
  - axi_ad9434/axi_ad9434_ip.tcl
  - axi_ad9467/axi_ad9467_ip.tcl
  - axi_ad9625/axi_ad9625_ip.tcl
  - axi_ad9671/axi_ad9671_ip.tcl
  - axi_ad9680/axi_ad9680_ip.tcl
  - axi_ad9684/axi_ad9684_ip.tcl
  - axi_ad9739a/axi_ad9739a_ip.tcl
  - axi_ad9963/axi_ad9963_ip.tcl
  - axi_adrv9009/axi_adrv9009_ip.tcl
  - axi_fmcadc5_sync/axi_fmcadc5_sync_ip.tcl
  - axi_hdmi_tx/axi_hdmi_tx_ip.tcl
  - xilinx/axi_adxcvr/Makefile
  - xilinx/axi_adxcvr/axi_adxcvr_ip.tcl
  - xilinx/util_adxcvr/Makefile
  - xilinx/util_adxcvr/util_adxcvr_ip.tcl
2019-03-30 11:26:11 +02:00
AndreiGrozav 66823682b6 Add FPGA info parameters flow
Common basic steps:
- Include/create infrastructure:

   * Intel:
       - require quartus::device package
       - set_module_property VALIDATION_CALLBACK info_param_validate

   * Xilinx
       - add bd.tcl, containing init{} procedure. The init procedure will be
         called when the IP will be instantiated into the block design.
       - add to the xilinx_blockdiagram file group the bd.tcl and common_bd.tcl
       - create GUI files

- add parameters in *_ip.tcl and *_hw.tcl (adi_add_auto_fpga_spec_params)
- add/propagate the info parameters through the IP verilog files

axi_clkgen
util_adxcvr
ad_ip_jesd204_tpl_adc
ad_ip_jesd204_tpl_dac
axi_ad5766
axi_ad6676
axi_ad9122
axi_ad9144
axi_ad9152
axi_ad9162
axi_ad9250
axi_ad9265
axi_ad9680
axi_ad9361
axi_ad9371
axi_adrv9009
axi_ad9739a
axi_ad9434
axi_ad9467
axi_ad9684
axi_ad9963
axi_ad9625
axi_ad9671
axi_hdmi_tx
axi_fmcadc5_sync
2019-03-30 11:26:11 +02:00
Adrian Costina e1f15f946b axi/util_adxcvr: Add register to control eyescan reset 2018-11-16 14:18:33 +02:00
Istvan Csomortani 0d3e05b311 axi|util_adxcvr: Expose TX configurable driver ports
Expose the TX configurable driver ports, more specifically the
TX_DIFFCTRL, TX_POSTCURSORE and TX_PRECURSORE for software. This
provides a soft tunning capability of the transmit side of the
transceivers, in cases where the insertion loss of the channel is too
high or low, comparing to the default value supported by the default
configuration of the GTs.

You can find information about these configuration ports under the
section called 'TX Configurable Driver' in the GT transceivers user
guide. (UG476, UG576)
2018-10-04 14:37:02 +03:00
Istvan Csomortani af5c71a9b2 axi|util_adxcvr: Delete reset interface inference for PLL resets
The Xilinx's reset interface expect that every reset have an associated
interface and clock signal. The tool will try to find its clock and interface,
and automatically associated clock signal to it.

The PLL resets are individual asynchronous resets. To simplify the design
and avoid invalid critical warnings all the reset interface inference
for the PLL resets were removed.
2018-08-23 18:41:48 +03:00
Adrian Costina 74b922f9f8 axi_*: Infer clock and reset signals of an IP
A clock sink must be connected to clock source, and a reset sink to
reset source, otherwise the tool will throw a synthesis warning.
By properly inferring all the reset and clock signals of an IP, we can
get rid of unwanted warning messages.

The following IPs tcl script was updated:
  - axi_ad9434
  - axi_hdmi_tx
  - util_cpack
  - util_adxcvr
  - axi_ad6676
  - axi_ad9625
  - axi_ad9379
  - axi_ad9265
  - util_tdd_sync
  - util_rfifo
  - util_wfifo
  - axi_ad9361
  - axi_ad9467
  - util_upack
  - axi_dacfifo
  - axi_ad9152
  - axi_ad9680
  - util_clkdiv
  - axi_ad9122
  - axi_ad9684
  - axi_mc_speed
  - axi_mc_current_monitor
  - axi_mc_controller
  - util_gmii_to_rgmii
  - util_adxcvr
  - axi_ad9379
  - axi_hdmi
  - library
  - axi_fmcadc5_sync
  - util_adcfifo
  - util_mfifo
  - axi_jesd204_rx
  - axi_jesd204_tx
  - axi_ad9361
  - axi_adxcvr_ip
2018-04-11 15:09:54 +03:00
Lars-Peter Clausen 6d4430cfda axi_adxcvr/util_adxcvr: Fix non-broadcast DRP access
When using non-broadcast access to the GT DRP registers lane filtering is
done on both sides. The ready and data signals are filtered in the in the
axi_adxcvr module and the enable signal is filtered in the util_adxcvr
module. This works fine as long as both sides use the same transceiver IDs.
E.g. channel 0 of the axi_adxcvr module is connected to channel 0 of the
util_adxcvr module.

But this is not always the case. E.g. on the ADRV9371 platform there are
two RX axi_adxcvr modules (RX and RX_OS) connected to the same util_adxcvr.
The first axi_adxcvr uses lane 0 and 1 of the util_adxcvr, the second uses
lane 2 and 3.

Non-broadcast access for the first RX axi_adxcvr module works fine, but
always generates a timeout for the second axi_adxcvr module. This is
because lane 0/1 of the axi_adxcvr module is connected to lane 2/3 of the
util_adxcvr and when ID based filtering is done both can't match at the
same time.

To avoid this perform the filtering for all the signals in the axi_adxcvr
module. This makes sure that the same base ID is used.

This also removes the sel signal from the transceiver interfaces since it
is no longer used on the util_adxcvr side.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-06-28 17:30:51 +02:00
Lars-Peter Clausen d883aabcc1 adi_ip.tcl: Use analog.com for interface vendor
Currently the scripts use 'analog.com' as the vendor property for IP cores,
but 'ADI' for interfaces.

Make things consistent by using 'analog.com' for both interfaces as well
as IP cores.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-24 18:10:15 +02:00
Rejeesh Kutty 1e54b5230f axi_adxcvr- add m_axi associated clock 2017-02-02 11:17:56 -05:00
Istvan Csomortani d3ed417f49 axi_adxcvr: Update the packaging script to fix infer mm issues
- Change the clock and reset port name of the AXI slave interface
to s_axi_aclk and s_axi_aresetn. This way we can use the adi_ip_properties
process to infer the interface.
  - Define an address space reference to the m_axi interface.
2017-01-19 15:16:04 +02:00
Rejeesh Kutty c57ffc9364 axi_adxcvr- separate pll reset from channels 2016-11-22 11:12:54 -05:00
Shrutika Redkar 829e4155ca modified transceiver configuration files 2016-08-10 14:59:38 -04:00
Rejeesh Kutty 2b7c976be5 xcvr- altera/xilinx split 2016-08-04 13:26:10 -04:00