d08d1d5a1b
adrv9371x ,daq3, fmcomms7, fmcomms11: add dac_fifo missing reset connection
2017-03-10 14:20:42 +02:00
452e5e5ce0
fmcomms2- add delay reporting for iodelay
2017-03-09 15:29:15 -05:00
8bdfbe2b0a
fmcomms2- report delays
2017-03-09 15:21:42 -05:00
7e5d8664ad
fmcjesdadc1_a5gt: rx_data pins are all associated to the same clock
2017-03-09 08:57:03 +02:00
0e002f2f31
daq3_a10gx: Set XCVR Tx/RX clk/data voltage levels at 1V
2017-03-09 08:50:55 +02:00
191669ad28
daq2_common: Fix the dac_rst for DAC FIFO
2017-03-07 16:13:46 +02:00
fc8af6903f
pzsdr2/ccfmc- add rf input protection
2017-03-06 16:19:55 -05:00
3fa9a30f0e
a10soc/plddr4- lower mem clk to meet timing
2017-03-06 14:12:25 -05:00
38a27d02f6
a10soc/plddr4- differential refclk
2017-03-06 14:11:36 -05:00
936c441763
adrv9371x- dacfifo bypass-gpio control
2017-03-06 10:35:09 -05:00
762276a880
adrv9371x- dacfifo changes
2017-03-06 10:33:52 -05:00
4a6fe54fcf
daq2_common: Update common scripts
...
Add new port connection for util_dacfifo
2017-03-03 18:49:10 +02:00
ec89b1a45f
altera/adrv9371x- add dacfifo
2017-03-01 15:52:07 -05:00
bc6a09c828
adrv9371x/a10soc- dacfifo added
2017-03-01 15:35:04 -05:00
5b5c0dde99
ad6676evb: Set default xcvr parameters to common design
2017-03-01 11:32:17 +02:00
b78e9d8c27
daq2_a10gx: Set XCVR Tx/RX clk/data voltage levels at 1V
2017-03-01 11:32:17 +02:00
0cc5130c9a
adrv9371x: Set XCVR Tx/RX clk/data voltage levels at 1V
2017-03-01 11:32:17 +02:00
c1be17a3af
Altera a10 devices: disable warnings regarding unused channels
2017-03-01 11:32:17 +02:00
dc168f41fe
adrv9371_a10soc: Fixed port assignments
2017-03-01 11:32:17 +02:00
aad41039bd
a10soc- plddr4 settings
2017-02-28 13:36:28 -05:00
59dda01419
m2k: Disabled DDS cores for the generic project
2017-02-28 10:10:28 +02:00
fb4a583613
projects/system_bd- adc/dac fifo board designs
2017-02-27 16:06:39 -05:00
6b1a8852a9
dacfifo- bypass port name change
2017-02-27 16:06:39 -05:00
19c7b5d340
fmcadc5- move adc fifo settings to system-board
2017-02-27 16:06:39 -05:00
c1aac4a9fb
common: adc/dac fifo board designs
2017-02-27 16:06:39 -05:00
545e458997
m2k: Standalone, ignored critical warning for contraints that should only be applied at the implementation stage
2017-02-27 14:17:29 +02:00
eda585f0e4
m2k: Connected data[0] and trigger[0] pins to the logic analyzer clock generator input 2
2017-02-27 14:16:32 +02:00
908da60ab6
m2k: zed, changed constraints so they are the same with the ZED default configuration
...
- the voltage can be physically changed between 1.8V, 2.5V and 3.3V
2017-02-27 14:13:34 +02:00
0059c907ea
adrv9371: Drive the TX DMA interface with sys_dma_clk
2017-02-24 15:50:12 +02:00
ac2e5a9dac
constraints: Update constraints
...
Xilinx recommends that all synchronizer flip-flops have
their ASYNC_REG property set to true in order to preserve the
synchronizer cells through any logic optimization during synthesis
and implementation.
2017-02-24 13:43:32 +02:00
1fce57f6c3
axi_dacfifo: Redesign the bypass functionality
2017-02-23 17:32:31 +02:00
c598e84258
remove processing order (no clock def dependency)
2017-02-22 16:02:08 -05:00
edd5e9570f
file renamed; sed output; fingers crossed
2017-02-22 15:56:37 -05:00
b00dc4b195
plddr3- change to board files
2017-02-22 15:22:50 -05:00
89b49d2f67
fifo- as board files
2017-02-22 15:18:50 -05:00
879ed64bb6
compression flag changes
2017-02-22 15:15:53 -05:00
8a5e2ff46e
sys_wfifo- removed
2017-02-22 15:13:18 -05:00
754ac6a403
w/r-fifo- removed
2017-02-22 15:10:06 -05:00
040b61de60
fmcadc5: Updated default parameters
2017-02-20 17:13:58 +02:00
a15e05c497
adcfifo- remove axi-byte-width parameter
2017-02-17 15:29:10 -05:00
cb3d1883bc
fmcjesdadc1/a5gt- hard placement of ddr hr/qr registers
2017-02-17 15:21:33 -05:00
e8bcbb74da
scripts: fixed tcl syntax for altera projects not meeting timing
2017-02-16 21:21:51 +02:00
95a4ea20c8
axi_dacfifo: Delete redundant parameter BYPASS_EN
2017-02-16 19:53:44 +02:00
8453d758c2
scripts: If an altera project doesn't meet timing, rename the sof
2017-02-16 19:20:49 +02:00
343d0472d4
fmcadc2: Move GT setting to common/system_bd.tcl
2017-02-16 14:56:25 +02:00
07184b31d2
fmcadc2: Define default clock selection for Xilinx GTs
2017-02-16 12:35:24 +02:00
86c279c238
pzsdr1: ccbox, moved I2S core to DMA0 and DMA1 to fix critical warnings
2017-02-14 14:51:49 +02:00
46290193f3
pzsdr2: ccusb, renamed clk_out to clkout_in
2017-02-14 11:58:11 +02:00
27119343f2
pzsdr2: ccusb, connect unused clock pins to GND
2017-02-14 11:56:54 +02:00
fa37f4dd0a
pzsdr2: Don't set a disabled parameter
2017-02-14 11:56:08 +02:00
AndreiGrozav
Rejeesh Kutty
Istvan Csomortani
Adrian Costina