zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,641 Commits
1 Branch
0 Tags
23 MiB
Commit Graph

16 Commits (d64bd4cec1e0bc77915e5ad2384ef37d252e6b18)

Author SHA1 Message Date
Istvan Csomortani 1c23cf4621 all: Update verilog files to verilog-2001 2017-04-13 11:59:55 +03:00
AndreiGrozav f10c1e6e93 axi_hdmi_tx: Remove hdmi_full_range register 2016-05-27 14:04:40 +03:00
AndreiGrozav 0d2dc2c62b axi_hdmi_tx: Fixed data bus width 2016-05-05 13:26:59 +03:00
AndreiGrozav 6fe41ebb08 axi_hdmi_tx: Upgrade hdmi clipping process 
-added two registers that control the clipping ranges (0x01a and 0x01b)
-extend clipping process for all output data formats
 2016-04-12 22:01:07 +03:00
Lars-Peter Clausen acd9efc528 axi_hdmi_tx: Add parameter to configure the output clock polarity 
In order to maximize the window where it is safe to capture data we ideally
want to launch data on the opposite edge to which it is captured. Since the
edge on which data is captured depends on the connected device add a
parameter that allows to configure the launching edge.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-11-03 10:59:13 +01:00
Rejeesh Kutty a33c08725b axi_hdmi_tx- altera ip changes 2015-08-28 13:48:33 -04:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters 
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
 2015-08-19 14:11:47 +03:00
Lars-Peter Clausen cf6052e2a8 axi_hdmi_tx: Add control to bypass chroma sub-sampler 
Add a control bit to the register map that allows to bypass the chroma
sub-sampler in the axi_hdmi_tx core. This is primarily interned to be used
to send the test-pattern directly to the HDMI transmitter without modifying
it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-06-30 21:16:09 +02:00
Rejeesh Kutty e918588a4b library: remove axi-min-size parameter 2015-05-19 13:07:48 -04:00
Rejeesh Kutty de33722470 up/constr: independent read/write and local constraints 2014-10-02 14:35:59 -04:00
Lars-Peter Clausen 41cc92ef49 Remove BASEADDR/HIGHADDR parameters 
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2014-09-11 12:26:37 +02:00
Rejeesh Kutty 1396a215e5 library: local constraints 2014-08-14 15:09:47 -04:00
Rejeesh Kutty 60dd14bcdb a5soc: removed jtag master control 2014-07-01 12:27:37 -04:00
Rejeesh Kutty 5f2fb45b24 library: ported hdmi tx to altera 2014-05-02 12:07:47 -04:00
Rejeesh Kutty a10043c4f4 kcu105: base complete with ethernet errors 2014-04-30 14:41:43 -04:00
Rejeesh Kutty f7c9368abc initial checkin 2014-02-28 14:26:22 -05:00