d690a614c1
a10gx: Force all used tiles to high speed, in order to improve timing
2017-10-04 16:16:00 +01:00
03e744f0f1
daq1_zed: Lower the adc and daq clock to 450MHz
...
The FPGA fabric on zedboard is a -1 speadgrade (max bufg clk 464MHz)
2017-10-04 13:01:14 +01:00
7a3c4ab81f
arradio: Changed ADC DMA buswidth connection to the DDR to 128 bits
...
This fixes the bandwidth issue when data is streamed from the DDR and the system works at 61.44 MSPS
2017-10-04 13:01:14 +01:00
ee01ea3736
daq2/a10gx: Add cfi_flash to qsys
...
+ Add cfi_flash to qsys
+ Set nios reset vector to cfi_flash
2017-10-04 11:30:29 +01:00
a33f3178c2
adrv9371x/a10soc: For receive paths SYNC_TRANSFER must be enabled
2017-10-04 11:29:09 +01:00
a2ee478027
axi_ad9361: Fix incorrect merge
...
Fix paramter propegation for DAC_CLK_EDGE_SEL
2017-10-03 10:51:35 +01:00
0064004d34
axi_dmac: Control s_axis_user/fifo_wr_sync validity
...
The ports s_axis_user or fifo_wr_sync will be active just
if the SYNC_TRANSFER_START is enabled.
2017-10-03 09:32:14 +01:00
899b8436ad
arradio: Fix the last incorrect merge
2017-10-03 09:15:45 +01:00
08a31a7d9f
axi_dmac: Fix the last incorrect merge
2017-10-03 09:15:45 +01:00
49293f7a87
axi_ad9361: Fix the last incorrect merge
...
The last merge broke a couple of source files of this core. This
commit brings all the core to a functional state.
2017-10-03 09:15:23 +01:00
89bd8b44d4
Merge branch 'dev' into hdl_2017_r1
2017-09-26 07:42:19 +01:00
a386a42642
interface: Update the transceiver interfaces
...
On commit 6d4430 the signal called sel was removed from the transceiver
interfaces. Update the interface definition script.
2017-09-25 18:02:04 +01:00
256dd87dd2
common/microzed: Enable PS CLK1 = 200MHz
2017-09-25 15:16:58 +03:00
07f3295638
common/a10soc: Update configuration for emif plddr4 IP
2017-09-25 08:57:26 +01:00
2926a6aaf9
altera/ad_mem_asym: Delete it, QSYS flow is used
2017-09-25 08:57:26 +01:00
700ed156ab
[axi|avl]_dacfifo: Create a separate bypass module for altera/xilinx
2017-09-25 08:56:40 +01:00
3a47567f9c
common/a10gx: Chance SPI frequency from 128KHz to 10 MHz
2017-09-19 18:01:18 +03:00
55daa786fa
axi_adcfifo: Add missing constraints
...
Add missing timing exceptions on paths between the DMA and DDR clock
domains. All these paths are properly synchronized using CDC in the HDL,
but are missing timing exceptions in the XDC file. This can lead to timing
errors when building a design using the axi_adc_fifo.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-09-13 19:52:48 +02:00
cafa811c74
adrv9379: Change the DMA clock to 250
2017-09-11 16:52:44 +03:00
58572d746c
arradio/c5soc- rd10102013_979 fix
2017-09-05 12:52:41 -04:00
c3aa3e8a9c
adrv9371: a10soc: Whitespace cleanup
...
Remove some extra end-of-line whitespace.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-09-05 13:47:49 +02:00
6736aaeca1
arradio- add control/status ports
2017-09-01 14:39:18 -04:00
bb73e7a40f
arradio- add control/status ports
2017-09-01 14:39:18 -04:00
6ce4494002
adrv9379: Initial commit
2017-09-01 17:28:04 +03:00
9a32240cc5
axi_ad9379: Initial commit
2017-09-01 17:26:37 +03:00
cb2fd6af73
dm2k: Drive the ADC DMA valid from the trigger extracting core
2017-08-30 18:28:52 +03:00
6d5b5b50a5
axi_logic_analyzer: Compensate the 4 word latency of util_var_fifo
2017-08-30 18:17:41 +03:00
f6288dc0a3
util_extract: Compensate 4 word latency
2017-08-30 18:02:09 +03:00
54e96c49ae
util_var_fifo: Set fix latency of 4 for all interpolation values
2017-08-30 18:01:06 +03:00
3e96903be7
jesd204_rx: rx_ctrl: Fix typo
...
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-28 16:11:00 +02:00
421b4bed41
axi_ad9963: Moved RX configuration bit SCALECORRECTION_ONLY to bit 9
2017-08-28 15:58:00 +03:00
5bc927ff94
adrv9364/ccbox- input rf protection
2017-08-25 13:30:46 -04:00
dc0a71920c
adrv9361/ccbox- sort gpio - accidental multiple drivers
2017-08-25 13:30:46 -04:00
f19b8c62a1
library- add a timer for quick start
2017-08-25 13:28:05 -04:00
fd8b524953
adrv9361-ccbox/ccfmc- adl5904/gpio updates
2017-08-25 11:23:56 -04:00
4050f5ae58
adrv9361- add adl5904
2017-08-24 15:47:17 -04:00
e4988aa131
adrv9371x: altera: Convert to ADI JESD204
...
Convert the ADRV9371 project for Intel/Altera platforms to the ADI JESD204
framework.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:55:10 +02:00
e4bb2beaf1
altera: adi_jesd204: Export link domain reset
...
Export the reset signal for the link clock domain. This can be used by
external logic that is in the link clock domain to reset itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:43:12 +02:00
853342b201
altera: adi_jesd204: Disable FPLL phase alignment mode
...
Enabling the phase alignment mode of the FPLL seems to break manual
re-calibration, which is required when changing the lane rates. The
calibration seems to select the wrong VCO frequency band and the PLL no
longer locks.
Disable phase alignment mode for now, this has a negative effects on
deterministic latency, but it is better than not working at all.
Waiting for feedback from Altera/Intel on how to make manual re-calibration
work in phase alignment mode.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:43:12 +02:00
72a23eeb71
altera: adi_jesd204: Enable avmm_busy flag in the link FPLL register map
...
To be able to check the FPLL re-configuration arbitration status from
software enable the avmm_busy flag in the register map.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:42:44 +02:00
dd1b1c89f9
jesd204: jesd204_rx: Don't expose internal states on the status interface
...
The DEGLITCH state of the RX state machine is a workaround for misbehaving
PHYs. It is an internal state and an implementation detail and it does not
really make sense to report through the status interface.
Rework things so that DEGLITCH state is reported as part of the CGS state
on the external status interface.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:42:44 +02:00
e6aacd2f56
axi_dmac: Better support debug IDs when ID_WIDTH != 3
...
The current layout of the debug ID register assumes that the ID_WIDTH is 3.
Change things so that the padding 0 width depends on the ID_WIDTH
parameter so that we end up with the same register layout regardless of the
value of ID_WIDTH.
Also split things into two registers, this allows for an ID_WIDTH up to 8
(which should hopefully be enough for all practical applications).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-24 17:42:20 +02:00
d05ed29212
adrv9371x_zcu102: Initial commit
2017-08-22 15:48:03 +03:00
c0da4e6192
adrv9371x_kcu105: Initial commit
2017-08-22 15:41:49 +03:00
1d67036305
adrv9371x/common: Remove ila_adc and ila_os_adc
2017-08-22 15:37:59 +03:00
6fa45bb378
adrv9371x/common: Fix axi_ad9371_dacfifo/dac_rst assignamen
2017-08-22 15:37:59 +03:00
a64998c3ff
adrv9371x: Separate ps7 assignaments from common
...
Move the assignaments/connections for ps7 from common/adrv9371_bd
to zc706/system_bd
2017-08-22 15:37:59 +03:00
b7ce81686a
common/zcu102: Fix ps8 ref clock 0 frequency assignament
2017-08-22 15:37:59 +03:00
41e247d426
common/zcu102: Add gpio_t connections
2017-08-22 15:37:59 +03:00
deefb33490
avl_dacfifo: Update IP to qsys flow
2017-08-22 09:16:21 +01:00
Adrian Costina
AndreiGrozav
STEVE KRAVATSKY
Istvan Csomortani
Lars-Peter Clausen
Rejeesh Kutty