Rejeesh Kutty
2600b1f359
daq3: tx interleave and dma fifo axi streaming
2014-10-15 14:51:04 -04:00
Rejeesh Kutty
6d76e0b768
zc706: remove top level constraints
2014-10-15 14:51:02 -04:00
Rejeesh Kutty
5715c5b28f
dmafifo: axi stream interface
2014-10-15 14:50:57 -04:00
Rejeesh Kutty
0aed11fa6c
adi_project: demote useless warnings
2014-10-15 14:50:54 -04:00
Lars-Peter Clausen
4d4a7981f2
fmcomms1: Connect DMA controller directly to the HP ports
...
The AXI DMAC controller nativly supports AXI3, there is no need to insert a interconnect to do protocol conversion.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:46:07 +03:00
Lars-Peter Clausen
7d3be14ab5
common: Connect audio clkgen reset
...
While we are at it also hide the unused locked pin.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:44:46 +03:00
Lars-Peter Clausen
fd89458708
common: Set cpu interconnect strategy to minimize area
...
There will rarely be concurrent access to the peripheral control bus
interconnect, so there is no need to optimize for performace. Setting the
interconnect strategy to minimize area can reduce the resource usage by
~90%.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:43:54 +03:00
Istvan Csomortani
d2a04856a9
common: Fix xlconstant output pin name
...
On 2014.2 xlconstant output pin name is 'dout'.
2014-10-15 15:37:06 +03:00
Istvan Csomortani
02802644bf
fmcjesdadc1: Fix a few warning and issue with ILA
...
+ GPIO width is 15
+ Fix ILA core
2014-10-15 15:37:05 +03:00
Adrian Costina
865cbab3a2
ad9671_fmc: Updated a5gt project with start of frame information
2014-10-15 10:53:33 +03:00
Adrian Costina
8934a66013
usdrx1: Update project so that the AD9671 cores can be synchronized
2014-10-13 17:06:40 +03:00
Istvan Csomortani
f528873fa9
fmcomms2: Add an additional SPI interface for up/down converter board
...
Supported carriers are: ZC706, ZC702 and Zed.
2014-10-10 18:47:07 +03:00
Istvan Csomortani
ca4c961891
fmcomms2: Use ad_iobuf instance on system_top
...
Use ad_iobuf instance on system top, instead of separate IOBUF instances.
2014-10-10 18:45:39 +03:00
Istvan Csomortani
e21d26e456
fmcomms2: Cosmetic changes
...
Get rid of unwanted whitespaces.
2014-10-10 18:25:17 +03:00
Istvan Csomortani
fe8a076b2e
fmcomms2: Cosmetic changes on *_bd.tcl script
2014-10-10 17:06:32 +03:00
Lars-Peter Clausen
7a9e694446
fmcomms2: Connect DMA directly to the HP ports
...
The DMA controller is able to send AXI3 compatible requests, no need to add
a interconnect for protocol conversion in between the DMA controller and the
HP port.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:14 +03:00
Lars-Peter Clausen
87047fd83e
fmcomms2: Set dac_unpack channels to 4
...
There are only 4 DAC channels in the fmcomms2 design, so set the number of
channels of the dac_unpack core to 4. This slightly reduces resource usage
as well as reducing the DMA alignment requirement from 128bit to 64bit. The
later value is what existing applications expect the alignement requirement
to be.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:06 +03:00
Lars-Peter Clausen
43e9b0c7a6
common: Disable TTC0 MMIO routing for PS7
...
We do not use the ttc0 to MMIO routing, but it is enabled by default, so
explicitly disable it.
2014-10-10 16:19:51 +03:00
Istvan Csomortani
e361bbbd04
Revert "fmcomms2_udc: Initial check in"
...
This reverts commit ddc7c845e9
.
2014-10-10 14:48:55 +03:00
Paul Cercueil
7659f3438c
AD9467: Fixup swapped net names
...
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
2014-10-10 12:33:07 +03:00
Rejeesh Kutty
adf4893a27
usdrx1: remove constraints and other changes
2014-10-09 15:25:08 -04:00
Istvan Csomortani
ddc7c845e9
fmcomms2_udc: Initial check in
...
FMCOMMS2 with an additional SPI port for the up/down converter board
2014-10-09 19:01:22 +03:00
Istvan Csomortani
6f77af4aff
fmcjesdadc1: Upgrade project to 2014.2
2014-10-09 18:55:27 +03:00
Istvan Csomortani
2da395926e
fmcomms2: Upgrade project to 2014.2
2014-10-09 18:54:33 +03:00
Istvan Csomortani
4f6aa159b8
mitx045: Base design now support 2014.2
2014-10-09 15:11:28 +03:00
Adrian Costina
edeeafa47d
ad9671_fmc: Added sof information to the AD9671 driver
2014-10-09 14:52:25 +03:00
Istvan Csomortani
072e11c661
ad9467_fmc: Upgrade the axi_quad_spi core
2014-10-08 15:22:58 +03:00
Istvan Csomortani
fc38249150
ad9467 ZED: Fix over range signal path, and the dma interface.
2014-10-08 11:24:44 +03:00
Istvan Csomortani
15db557bd6
ad9467 ZED: Cosmetic changes on bd script.
2014-10-08 11:24:32 +03:00
Istvan Csomortani
82717b354a
ad9467_fmc : Upgrade project to 2014.2
2014-10-08 11:21:43 +03:00
Istvan Csomortani
b2d0260130
ad9467_fmc: Prevent to use concatenation module on SPI interface
...
This module cause unnecessary issues during version upgrades.
2014-10-08 11:20:45 +03:00
Rejeesh Kutty
27153fff41
ad9625x2_fmc: updated to 2014.2
2014-10-07 16:05:09 -04:00
Adrian Costina
2dfcb0c599
usdrx1: Initial commit for a5gt
...
axi_ad9671: added start of frame information to the altera core.
2014-10-07 19:41:54 +03:00
Istvan Csomortani
95842b8949
ad9434_fmc: Fix adc_valid signal path
2014-10-07 18:02:33 +03:00
Istvan Csomortani
115f33b8d6
ad9434_fmc: Fix pin constraints for ZC706
2014-10-07 17:58:29 +03:00
Istvan Csomortani
c1213ffe71
ad9434_fmc: Fix SPI interface
2014-10-07 17:51:14 +03:00
Michael Hennerich
cd42345324
projects/common/xxx/xxx_system_bd.tcl: 'Update microblaze defaults
...
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
2014-10-07 09:17:24 +02:00
Rejeesh Kutty
bca8ec0160
daq2: 2014.2 and ver.d
2014-10-06 14:56:01 -04:00
Rejeesh Kutty
c375b5b26e
daq3: vivado build
2014-10-06 10:34:02 -04:00
Rejeesh Kutty
525373fc04
daq3: daq2 copy
2014-10-06 10:34:00 -04:00
Rejeesh Kutty
210da4116f
scripts: initial commit
2014-10-03 16:13:34 -04:00
Rejeesh Kutty
f0927afd0b
ad9625_fmc: add dma fifo for non-zynq
2014-10-01 14:51:14 -04:00
Adrian Costina
89964be59e
fmcomms1: Updated project to vivado 2014.2
2014-09-30 10:32:18 +03:00
Adrian Costina
041d8faaf7
common: Updated common projects for ac701/kc702/zc702/zed to vivado 2014.2
2014-09-30 10:31:00 +03:00
Rejeesh Kutty
922bc6f03a
fmcadc3: 16bit - but ignored 4 lsb(s)
2014-09-29 15:26:30 -04:00
Adrian Costina
3c25c1171d
fmcomms1: Fixed missing sample issue on ZC706. Added modifications for all other platforms
2014-09-26 10:28:07 -04:00
Istvan Csomortani
87c4c73e22
ad9434: Fix adc_clk constraint
...
ADC clock is 500 Mhz.
2014-09-25 16:54:06 +03:00
Istvan Csomortani
82ed885b53
ad9434: Fix SPI line physical constraints
...
SPI lines are not differential.
2014-09-25 16:53:16 +03:00
Istvan Csomortani
ccb0b135ca
ad9434: Fix the adc to dma interface.
...
All the device2dma interfaces needs to have a generic form : (data, enable, valid)/channel
2014-09-25 16:50:09 +03:00
Istvan Csomortani
683561b67d
AD9434: Initial check in of the library and project with ZC706
2014-09-24 18:27:17 +03:00