Commit Graph

21 Commits (e086f5eb9f9c575d3160a25b3cb97de088e9177c)

Author SHA1 Message Date
Istvan Csomortani 17675863e0 all_projects: Fix the interrupt connections to preserve IRQ layout 2014-10-22 11:48:08 +03:00
Istvan Csomortani f528873fa9 fmcomms2: Add an additional SPI interface for up/down converter board
Supported carriers are: ZC706, ZC702 and Zed.
2014-10-10 18:47:07 +03:00
Istvan Csomortani fe8a076b2e fmcomms2: Cosmetic changes on *_bd.tcl script 2014-10-10 17:06:32 +03:00
Lars-Peter Clausen 7a9e694446 fmcomms2: Connect DMA directly to the HP ports
The DMA controller is able to send AXI3 compatible requests, no need to add
a interconnect for protocol conversion in between the DMA controller and the
HP port.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:14 +03:00
Lars-Peter Clausen 87047fd83e fmcomms2: Set dac_unpack channels to 4
There are only 4 DAC channels in the fmcomms2 design, so set the number of
channels of the dac_unpack core to 4. This slightly reduces resource usage
as well as reducing the DMA alignment requirement from 128bit to 64bit.  The
later value is what existing applications expect the alignement requirement
to be.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-10 16:25:06 +03:00
Istvan Csomortani 2da395926e fmcomms2: Upgrade project to 2014.2 2014-10-09 18:54:33 +03:00
Adrian Costina 7e40f99fe9 fmcomms2: Improved constraints for ac701 and zc702. Fixed common design so that ILA works correctly on microblaze based systems 2014-09-23 22:28:27 -04:00
Adrian Costina f43b5d707e fmcomms2: Reduced clock frequency for ILA to meet timing for ZED
Modified ZED constraints to 250 MHz for the clock from AD9361
2014-09-16 16:08:28 -04:00
Adrian Costina 95c143412d fmcomms2: Modified design to work with 4 channel util_adc_pack 2014-08-29 13:53:59 +03:00
Adrian Costina 7000897031 fmcomms2, fmcomms5: updated util_adc_pack and util_dac_unpack
The cores now support up to 8 channels, in 1, 2, 4, 8 channel active configuration
2014-07-24 19:57:22 +03:00
Rejeesh Kutty ba7955c531 fmcomms2: register map modifications 2014-06-26 10:09:03 -04:00
Adrian Costina bef6a9c32c axi_ad9361: Split dma data into individual channels for both ADC and DAC 2014-06-07 17:15:31 +03:00
Istvan Csomortani 1d53d79e25 fmcomms2/common: Fix ad9361's interface
Loopback the l_clk to clk. l_clk is the device sampling clock, clk is used to
    synchronize the cores in case of a multiple device configuration.
2014-05-21 10:09:54 +03:00
Istvan Csomortani 25e4520726 fmcomms2/common: Delet trailing white spaces 2014-05-21 09:47:37 +03:00
ATofan 5aac9d7288 FMCOMMS2 added sync option
Added signals to allow synchronisation of multiple AD9361.
2014-04-10 10:46:42 +03:00
ATofan 814b0d72d6 Modified Reset signals for FMCOMMS2 base design
Made all resets the same (sys_100m_resetn)
2014-04-01 15:32:48 +03:00
ATofan 31a1ff384d FMCOMMS2 Base Design tcl modified
Added support for both Zynq and MicroBlaze projects
2014-03-21 09:57:52 +02:00
ATofan 2c898bf3a2 Added ZC706, ZC702 and ZED FMCOMMS2 Vivado Project
ZC706 runs rx_clk at 250 MHz.
ZC702 and ZED run rx_clk at 200 MHz due to slower fabric.
The ZC702 and ZED projects need init_user in the boot procedure in order for the HP Ports to work correctly.
Both DDS and DMA mode work.
2014-03-18 15:27:42 +02:00
ATofan ee56db8d50 FMCOMMS2: Modified FCLK2 to 125 MHz, and xdc file
tcl: FCLK2 was modified from 100 MHz to 125 MHz.

xdc: rx_clk period constraint was redefined from 8ns (125 MHz) to 4ns (250 MHz)
2014-03-14 16:27:56 +02:00
ATofan a6c3cb29c6 Modified SPI and ILA in fmcomms2_bd.tcl 2014-03-12 16:52:22 +02:00
Rejeesh Kutty 66c6b2b182 fmcomms2: added 2014-03-11 20:04:26 -04:00