b622b6592e
FMCOMMS5/ZCU102 : Merge from njpillitteri/hdl:dev
...
Pull request Dev #26
2017-01-13 14:47:16 +02:00
d2e7b6b635
fmcomms5: Added FIFOs for DAC and ADC paths so that they work at l_clk/2 or l_clk/4
2017-01-13 14:18:59 +02:00
a36057679a
fmcomms2: Update Makefiles
2017-01-13 14:16:21 +02:00
15c5bc7012
fmcomms2: zcu102, changed clkdiv C_SIM_DEVICE parameter to ultrascale
2017-01-13 13:57:32 +02:00
b84325d43f
fmcomms2: take into consideration both adc_r1 and dac_r1 for clock division selection
2017-01-13 13:56:04 +02:00
f003b5b35a
fmcjesdadc1: Reduce SYSREF period
2017-01-12 16:10:45 +02:00
e77428c50e
fmcomms2: Added FIFOs for DAC and ADC paths so that the path works at l_clk / 2 or l_clk /4
...
- removed ILA
2017-01-11 18:12:35 +02:00
37d54bb984
fmcjesdadc1/a5gt- max delay fit only
2017-01-04 16:04:19 -05:00
8b74e911b8
fmcjesdadc1/a5gt- qr to ddio max delay
2017-01-04 14:10:44 -05:00
e4e5b30ade
fmcadc5: Integrate ad_sysref_gen into the project
2017-01-03 13:52:39 +02:00
14ded4f123
fmcjeadadc1/a5soc- ad_sysref_gen updates
2016-12-22 15:59:45 -05:00
b089173b4c
fmcjesdadc1/a5soc- cpu clock is 50m for a5gt also
2016-12-22 14:14:21 -05:00
aa6c94c993
usdrx1/a5gt: ddr3 use ip constraints
2016-12-22 14:14:21 -05:00
18660c7ab4
fmcjesdadc1/a5gt: ddr3 use ip constraints
2016-12-22 14:14:21 -05:00
2bea337aa2
fmcjesdadc1/a5gt- use 50m-mem-cpu-clk
2016-12-22 14:14:21 -05:00
5d683943ab
fmcjesdadc1/a5gt- remove ad-sysref-gen-pack
2016-12-22 14:14:21 -05:00
f1168f9e29
fmcjesdadc1/a5gt- use xilinx setup 2-dma
2016-12-22 14:14:21 -05:00
1ceec2e2a9
projects/a5gt- use 50m afi clock for cpu- xcvr reconfig timing
2016-12-22 14:14:21 -05:00
eba30b0cde
projects/altera- qii_auto_pack option
2016-12-22 14:14:21 -05:00
4a783d523d
projects/altera* - default & common qsys commands
2016-12-20 16:27:44 -05:00
3e57ff1fc5
z-mpsoc- map 0x4-0x8,0x7-0x9
2016-12-20 16:14:38 -05:00
1156aeac16
ad_sysref_gen: Update SYSREF related constraints
2016-12-19 18:07:05 +02:00
da7f4608a8
fmcjesdadc1/usdrx1: Clean up the mess
...
Delete accidentally commited generated files.
2016-12-19 15:35:20 +00:00
f47863bbcf
usdrx1: Integrate ad_syref_gen into the project
2016-12-19 14:36:01 +00:00
8d799d0316
fmcjesdadc1: Intergrate ad_sysref_gen into project
2016-12-19 13:37:29 +00:00
0c42e04bc3
fmcadc2: Integrate ad_sysref_gen into the project
2016-12-19 12:16:05 +00:00
67390c2a95
ad6676evb: Update projects with ad_sysref_gen
2016-12-19 10:52:25 +00:00
8879218502
a5gte: Fixed timing violations
2016-12-16 15:37:51 +02:00
c0b0f9b7e9
ad6676evb: Connect SYS_REF to GPIO
2016-12-14 17:55:50 +02:00
557efed5d9
ad6676evb: Update clock constraints
2016-12-14 17:55:49 +02:00
3a2c889115
ad6676evb: Update GT configuration
2016-12-14 17:55:49 +02:00
d962614000
usdrx1/zc706: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:23:51 +02:00
d5165ca81f
motcon_fmc: Tie unused pins to GND
2016-12-13 19:20:13 +02:00
1515b6f1af
fmcomms7/zc706: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:18:18 +02:00
8846141467
fmcomms1/kc705: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:16:31 +02:00
c455d2d64f
fmcadc2/vc707: Disabele axi_spi constraint file
...
The interface ports of the AXI SPI IP are not connected
directly to a IOBUF, this results in a CRITICAL WARNING
2016-12-13 19:15:44 +02:00
8ebc8fe4e2
updated makefiles
2016-12-09 23:06:41 +02:00
06aab8ebbd
pzsdr1: Set the device core to 1R1T mode
2016-12-09 16:35:46 +02:00
8e69c838e1
common/ac701: Connect axi_ddr_cntrl/device_temp_i to GND
2016-12-09 13:54:39 +02:00
23c91ca48a
pzsdr1/lvds: The interface runs at max 122.88 MHz
2016-12-09 11:45:11 +02:00
f799c40cf0
usdrx1/a5gt- xcvr interface changes
2016-12-08 16:05:23 -05:00
c114888956
usdrx1- updates
2016-12-08 16:05:23 -05:00
b0eff57b0f
fmcomms2/zc702: Fix critical warnings
2016-12-08 19:54:52 +02:00
3dceb53984
fmcadc2/vc707: Fix timing violations
2016-12-08 19:51:18 +02:00
252c67ceff
fmcomms6: Delete project
...
This project will not be supported in further releases.
2016-12-08 17:22:41 +02:00
fb287d0178
kcu105- updates to match xilinx trd
2016-12-08 09:32:33 -05:00
3bc9df4c51
fmcomms5: Fixed the wornings created by TDD missing connections to axi_ad9361 core
2016-12-07 21:43:19 +02:00
8eaae98728
fmcadc2: Updates
2016-12-07 21:43:19 +02:00
801da3cb25
daq3/kcu105- fix timing violations
2016-12-06 12:31:40 -05:00
2d7fb03b93
adrv9371x/a10gx- fix os xcvr parameters
2016-12-06 12:31:40 -05:00
ad96c5e881
daq3/zc706: Change the speed grade of the FPGA to 3
2016-12-06 15:24:23 +02:00
8f94103f8b
daq1/a10gx: Makefile fix
2016-12-06 15:24:23 +02:00
95ee7c093c
daq1/a10gx: Update system_bd port names
2016-12-06 15:24:23 +02:00
b7143a7a3b
daq1/a10gx: Update IO pin assignments
2016-12-06 15:24:22 +02:00
a415625069
daq1/a10gx: Add spi wrapper file to the project
2016-12-06 15:24:22 +02:00
e30a80fda0
daq1_spi: Delete device specific macro instantiation
2016-12-06 15:24:21 +02:00
7a8dc92b84
usb_fx3: Add interrupt monitor and increase ILA data depth
2016-12-06 11:55:28 +02:00
1e4bdea80c
usrpe31x: Fix Makefile
2016-12-06 11:07:42 +02:00
4b7bf422ee
pzsdr2/ccbox- remove imu intr on pl
2016-12-05 10:21:42 -05:00
351811e13f
pzsdrx/ccbox- imu intr on gpio
2016-12-05 10:18:40 -05:00
170c781d02
hdlmake.pl- updates
2016-12-01 13:52:11 -05:00
6e89ac3d65
pzsdr2: ccusb_lvds, add flag_a,flag_b signals
2016-11-30 17:39:02 +02:00
0faa1ebff2
pzsdr1: ccusb_lvds, add flag_a,flag_b signals
2016-11-30 17:38:04 +02:00
84a76b9dea
imageon: Invert HDMI TX clock
...
The ADV7511 samples the parallel data bus at the rising edge of sample
clock. Generate the clock so that the falling edge is aligned to updating
the bus data. This creates larger timing margins on each side of the
sampling edge and makes the design more robust.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 15:43:24 +01:00
24cc8d284b
imageon: Increase RX DMA FIFO size
...
Increase the RX DMA FIFO to be able to better compensate for momentarily
memory bus contention. This has shown to resolve occasional overflows that
would occur under high system memory load.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
99dae73d96
imageon: Connect hdmi_rx_core output clock to DMA
...
Connect the HDMI RX core output clock to the DMA rather than connecting the
HDMI RX input clock directly. This will allow the HDMI RX core to modify
the clock and e.g. insert clock buffers or similar.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
07217740b5
imageon: Increase HDMI RX clock constraint
...
The ADV7611 is rated for a maximum clock rate of 165MHz. Increase the clock rate constraint to match this.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-29 14:12:39 +01:00
284fbac571
usdrx1: Xcvr updates, so that the channel parameters are correctly configured from boot time
2016-11-28 14:16:07 +02:00
45fd4f806d
fmcjesdadc1: Fixed RX_PMA_CFG parameter
2016-11-25 16:33:58 +02:00
11b57290f1
fmcadc5- replaced with axi_adxcvr
2016-11-23 16:22:05 -05:00
22e230618c
scripts/adi_board.tcl- support multiple xcvrs
2016-11-23 16:22:05 -05:00
862bd7ef2c
daq3/zc706- xcvr changes
2016-11-23 15:02:20 -05:00
4e3e623530
pzsdr2/ccpci- updates
2016-11-23 14:02:59 -05:00
e5d3bae54d
projects/ad6676-adrv9371: xcvr updates
2016-11-23 11:06:22 -05:00
daa3df4b96
projects/- xcvr updates
2016-11-22 16:23:05 -05:00
8f562fd069
xcvr updates- board procedure
2016-11-22 14:43:36 -05:00
b1a9bd96f1
daq2: xcvr pll changes
2016-11-22 12:53:29 -05:00
750b23621b
board-tcl: xcvr qpll/cpll changes
2016-11-22 12:53:02 -05:00
4ed7469286
fmcadc4/zc706- updates
2016-11-22 10:32:05 -05:00
8c4279f618
pzsdr1: Added ccusb_lvds initial project
2016-11-22 16:58:34 +02:00
3d0049d274
pzsdr2: ccusb_lvdsr, updated project for the latest schematic
2016-11-22 16:55:52 +02:00
aff45eae5f
fmcadc2: xcvr updates
2016-11-21 18:45:38 +02:00
69ee410d3d
fmcomms2/zc706pr- bypass pr as default
2016-11-21 09:45:10 -05:00
4739d05269
zc706pr/common- removed
2016-11-18 14:52:39 -05:00
f43248c2bc
common/pzsdr*- removed
2016-11-18 11:32:43 -05:00
0d75bcb606
pzsdr2: ccbox: Use DMA interface 0+1 for audio
...
There is a bug in the ps7 component specification that causes critical
warnings to appear in the build log if DMA interface 0 is disabled, but any
other DMA interface is enabled.
Work around this issue by using DMA interface 0 and 1 instead of 1 and 2
for the I2S DMA.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2016-11-18 14:03:46 +01:00
b62f60b0da
pzsdr1/ccbox- updates
2016-11-17 16:14:28 -05:00
935f8a5c7b
pzsdr1/ccbox- constraints
2016-11-17 16:13:53 -05:00
4f65bcb3b2
pzsdr1/ccbrk_cmos- updates
2016-11-17 15:32:49 -05:00
e85dd2740a
pzsdr1/ccbrk_lvds- updates
2016-11-17 15:32:25 -05:00
a61da1d2ac
pzsdr1/common- updates
2016-11-17 15:31:25 -05:00
aa02ca875f
pzsdr1- common files
2016-11-17 13:40:25 -05:00
8c25402d53
pzsdr1- common files
2016-11-17 13:40:04 -05:00
4dae754287
pzsdr1- added readme
2016-11-17 11:29:01 -05:00
778638a7a1
pzsdr2- make updates
2016-11-17 10:26:45 -05:00
74bf4dfb80
pzsdr2- gpio- turn-around
2016-11-17 10:24:50 -05:00
d0166a4c7e
ccbox- updates
2016-11-17 10:24:11 -05:00
c2b7cbd61b
ccbox- constraints
2016-11-17 10:23:51 -05:00
5e6b931150
ccbox- added
2016-11-17 09:28:33 -05:00
fb5d36b250
pzsdr2- update ccfmc
2016-11-16 16:27:41 -05:00
Nick Pillitteri
Adrian Costina
Istvan Csomortani
Rejeesh Kutty
AndreiGrozav
Lars-Peter Clausen