Commit Graph

26 Commits (e6ac64c532718608efad130f0049a9e437af9dc8)

Author SHA1 Message Date
Iulia Moldovan 0c0617d49e libraries: Update modules according to guideline
* Added header license for the files that didn't have
* Modified parentheses
* Removed extra spaces at the end of lines
* Fixed parameters list to be each parameter on its line
* Deleted lines after endmodule and consecutive empty lines
* Fixed indentation

Signed-off-by: Iulia Moldovan <iulia.moldovan@analog.com>
2022-06-28 18:06:56 +03:00
Laszlo Nagy ef69fe36db util_adxcvr: Add PPF1_CFG parameter 2021-05-14 15:39:40 +03:00
Laszlo Nagy ea06fcd7b6 util_adxcvr: add GTY4 parameters for 15.5Gbps lanerate 2020-02-10 09:48:17 +02:00
Laszlo Nagy 253b1149ad library/xilinx/util_adxcvr: merge GTY and GTH prefixed parameter
parameters with same names were duplicated with transceiver specific
names due different default values.
This does not scales very well.

Use same name for the parameters as for other parameters and do the
default value handling in the IP configuration layer.
2020-02-10 09:48:17 +02:00
Adrian Costina 81bcf9f6fc util_adxcvr: Cleanup whitespaces for GTY4 instantiations 2019-06-25 15:35:49 +03:00
Adrian Costina a0d738e1a9 util_adxcvr: Add GTH parameters for line rate of 15Gbps 2019-05-24 11:05:36 +03:00
Laszlo Nagy f45408d6a9 util_adxcvr: Expose GTY4 parameters required for 15Gbps link
These parameters must be overwritten when the link is at 15Gbps.
The parameters have a GTY4_ prefix since the same parameters are shared
between GTY4 and GTH4 having different default values.
2019-05-09 15:33:15 +03:00
Istvan Csomortani 42d2738a30 axi/util_adxcvr: Add GTYE4 transceiver support 2019-04-12 16:19:54 +03:00
AndreiGrozav 66823682b6 Add FPGA info parameters flow
Common basic steps:
- Include/create infrastructure:

   * Intel:
       - require quartus::device package
       - set_module_property VALIDATION_CALLBACK info_param_validate

   * Xilinx
       - add bd.tcl, containing init{} procedure. The init procedure will be
         called when the IP will be instantiated into the block design.
       - add to the xilinx_blockdiagram file group the bd.tcl and common_bd.tcl
       - create GUI files

- add parameters in *_ip.tcl and *_hw.tcl (adi_add_auto_fpga_spec_params)
- add/propagate the info parameters through the IP verilog files

axi_clkgen
util_adxcvr
ad_ip_jesd204_tpl_adc
ad_ip_jesd204_tpl_dac
axi_ad5766
axi_ad6676
axi_ad9122
axi_ad9144
axi_ad9152
axi_ad9162
axi_ad9250
axi_ad9265
axi_ad9680
axi_ad9361
axi_ad9371
axi_adrv9009
axi_ad9739a
axi_ad9434
axi_ad9467
axi_ad9684
axi_ad9963
axi_ad9625
axi_ad9671
axi_hdmi_tx
axi_fmcadc5_sync
2019-03-30 11:26:11 +02:00
Adrian Costina 47f7894881 util_adxcvr: Initial commit for QPLL1 support (GTH3 and GTH4) 2019-02-11 17:20:08 +02:00
Istvan Csomortani 42127c07fc util_adxcvr: Expose QPLL and CPLL *_CFG attributes 2018-10-04 14:37:02 +03:00
Istvan Csomortani 8fc6ee8851 util_adxcvr: Define all GTHE4 attribute in binary
This commit does not contain any functional modification.

Because the wizard generates the attributes in binary, we should use
binary mode too, so we can compare different configurations more easily.
2018-10-04 14:37:02 +03:00
Istvan Csomortani 99a1768813 Revert "util_adxcvr: Update GTH4 parameter values to work with DAQ3 at 12.33Gbps lane rate"
This reverts commit 9a74a40c49.
2018-10-04 14:37:02 +03:00
Adrian Costina 9a74a40c49 util_adxcvr: Update GTH4 parameter values to work with DAQ3 at 12.33Gbps lane rate
Left new parameters values in binary, as that's the way they are generated with the wizard, so future diff should be easier
2018-08-23 18:06:32 +03:00
Istvan Csomortani 425e803364 license: Fix a spelling mistake 2018-04-11 15:09:54 +03:00
Lars-Peter Clausen 6d4430cfda axi_adxcvr/util_adxcvr: Fix non-broadcast DRP access
When using non-broadcast access to the GT DRP registers lane filtering is
done on both sides. The ready and data signals are filtered in the in the
axi_adxcvr module and the enable signal is filtered in the util_adxcvr
module. This works fine as long as both sides use the same transceiver IDs.
E.g. channel 0 of the axi_adxcvr module is connected to channel 0 of the
util_adxcvr module.

But this is not always the case. E.g. on the ADRV9371 platform there are
two RX axi_adxcvr modules (RX and RX_OS) connected to the same util_adxcvr.
The first axi_adxcvr uses lane 0 and 1 of the util_adxcvr, the second uses
lane 2 and 3.

Non-broadcast access for the first RX axi_adxcvr module works fine, but
always generates a timeout for the second axi_adxcvr module. This is
because lane 0/1 of the axi_adxcvr module is connected to lane 2/3 of the
util_adxcvr and when ID based filtering is done both can't match at the
same time.

To avoid this perform the filtering for all the signals in the axi_adxcvr
module. This makes sure that the same base ID is used.

This also removes the sel signal from the transceiver interfaces since it
is no longer used on the util_adxcvr side.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-06-28 17:30:51 +02:00
Istvan Csomortani 84b2ad51e2 license: Add some clarification to the header license 2017-05-31 18:18:56 +03:00
Istvan Csomortani 85ebd3ca01 license: Update license terms in hdl source files
Fix a few gramatical error, fix the path of the top level license
files.
2017-05-29 09:55:41 +03:00
Rejeesh Kutty 393577c911 util_adxcvr- 2016.4 gthe4 updates 2017-05-18 14:49:18 -04:00
Istvan Csomortani 9055774795 all: Update license for all hdl source files
All the hdl (verilog and vhdl) source files were updated. If a file did not
have any license, it was added into it. Files, which were generated by
a tool (like Matlab) or were took over from other source (like opencores.org),
were unchanged.

New license looks as follows:

Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.

Each core or library found in this collection may have its own licensing terms.
The user should keep this in in mind while exploring these cores.

Redistribution and use in source and binary forms,
with or without modification of this file, are permitted under the terms of either
 (at the option of the user):

  1. The GNU General Public License version 2 as published by the
     Free Software Foundation, which can be found in the top level directory, or at:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html

OR

  2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2017-05-17 11:52:08 +03:00
AndreiGrozav 9d6c93a5d8 Fix warnings 2016-11-14 15:17:15 +02:00
Rejeesh Kutty 0beecea02d util_adxcvr- ultrascale updates 2016-10-19 13:06:10 -04:00
Rejeesh Kutty 1b3fcb5863 util_adxcvr- parameter defaults 2016-10-17 16:10:57 -04:00
Rejeesh Kutty 48dd4880a3 util_adxcvr- ultrascale+ initial commit 2016-10-03 16:11:45 -04:00
Rejeesh Kutty b4652650e4 util_adxcvr- xcvr_type parameter 2016-10-03 16:11:45 -04:00
Rejeesh Kutty 2b7c976be5 xcvr- altera/xilinx split 2016-08-04 13:26:10 -04:00