zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2,604 Commits
1 Branch
0 Tags
23 MiB
Commit Graph

22 Commits (e9b199959a1c0fcd9a7da72e0df78df8d420f393)

Author SHA1 Message Date
AndreiGrozav 679d471d75 Merge branch 'hdl_2016_r1' into dev 
hdl_2016_r1 contains IP core upgrades to Vivado 2015.4.2 and hdmi_tx improvements.
 2016-04-19 18:05:50 +03:00
Istvan Csomortani 8a574cd8ba zc706_system_plddr3.tcl : Add integration process for the AXI_DAC_FIFO 2016-04-19 11:30:52 +03:00
AndreiGrozav d282064103 zc706: Updated common design to 2015.4 2016-03-15 15:16:36 +02:00
Istvan Csomortani 57cfb7cfb1 hdl/library: Update the IP parameters 
The following IP parameters were renamed:

PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
 2015-08-19 14:11:47 +03:00
Lars-Peter Clausen 6862655b0d Add .gitattributes file 
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
 2015-06-26 11:07:10 +02:00
Rejeesh Kutty e3e4af5c51 daq2/zc706: open ports 2015-06-10 14:25:58 -04:00
Rejeesh Kutty 6d0a2bf64c axi_adcfifo: added 2015-04-07 16:21:39 -04:00
Rejeesh Kutty f0395b646c plddr3: ad_connect updates 2015-03-09 16:07:37 -04:00
Rejeesh Kutty 65d9f08763 zc706: mig 2014.4 2015-01-09 14:12:52 -05:00
Rejeesh Kutty 77fa96fa67 plddr3: sys-rst from board pushbutton 2014-12-15 12:58:54 -05:00
Istvan Csomortani 34ffa15b12 zynq_plddr3: Fix PLDDR3's Reset Generator 
Reset generator's external reset signal was active low, but the GT reset is active high, and both the DDR controller and FIFO2S were in reset.
Therefore the external reset active state is changed to active high. This setup in general is made by the tool automatically, in order to do it correctly, need to
set this two property of the reset generator.
 2014-12-04 15:39:17 +02:00
Rejeesh Kutty c6af2696b3 plddr3: internal buswidth/clock conversion 2014-11-12 14:43:48 -05:00
Rejeesh Kutty 5715c5b28f dmafifo: axi stream interface 2014-10-15 14:50:57 -04:00
Rejeesh Kutty 7c98a783c5 2014.2 updates 2014-09-23 12:32:33 -04:00
Istvan Csomortani db1c931736 ad9625_plddr: PL DDR3 fixes 
- Modified the axi slave interface handler
  - Increased the rfifo_mem input depth to prevent overflow
 2014-07-23 19:34:44 +03:00
Istvan Csomortani 2b6ce1e504 zc706_plddr3 : Fix axi_fifo2s_axi_mrst net 2014-07-21 15:10:36 +03:00
Rejeesh Kutty 2955b9db78 fifo2s: flush if no request, c5soc: 14.0 2014-07-15 16:25:33 -04:00
Rejeesh Kutty b434fe6dd5 fmcomms5: register map changes 2014-07-08 16:57:43 -04:00
Rejeesh Kutty e38813fa9f fifo- monitor status signals 2014-06-25 12:15:13 -04:00
Rejeesh Kutty 57bb3705f2 zc706-plddr3: read changes to lower dma clock 2014-06-25 09:20:58 -04:00
Rejeesh Kutty c789dce77e ad9625/zc706: added pl ddr3 fifo changes 2014-05-29 12:59:29 -04:00
Rejeesh Kutty f73819f4d4 zc706: pl ddr3 initial checkin 2014-05-13 16:19:53 -04:00