pluto_hdl_adi

Commit Graph

Author	SHA1	Message	Date
Lars-Peter Clausen	8937c365a0	axi_dmac: Hook up rlast for MM-AXI source interface For the memory-mapped AXI read interface the slave asserts rlast for the last beat in a burst. This means we don't have to count the number of beats to know when the burst is completed but instead can use rlast. This slightly reduces the amount of resources needed for the MM-AXI source module and given that the beat_counter is often the bottleneck timing wise this should also improve the timing. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>	2018-07-03 13:44:34 +02:00
Lars-Peter Clausen	02bc91ad3a	axi_dmac: Rework transfer shutdown The DMAC allows a transfer to be aborted. When a transfer is aborted the DMAC shuts down as fast as possible while still completing any pending transactions as required by the protocol specifications of the port. E.g. for AXI-MM this means to complete all outstanding bursts. Once the DMAC has entered an idle state a special synchronization signal is send to all modules. This synchronization signal instructs them to flush the pipeline and remove any stale data and metadata associated with the aborted transfer. Once all data has been flushed the DMAC enters the shutdown state and is ready for the next transfer. In addition each module has a reset that resets the modules state and is used at system startup to bring them into a consistent state. Re-work the shutdown process to instead of flushing the pipeline re-use the startup reset signal also for shutdown. To manage the reset signal generation introduce the reset manager module. It contains a state machine that will assert the reset signals in the correct order and for the appropriate duration in case of a transfer shutdown. The reset signal is asserted in all domains until it has been asserted for at least 4 clock cycles in the slowest domain. This ensures that the reset signal is not de-asserted in the faster domains before the slower domains have had a chance to process the reset signal. In addition the reset signal is de-asserted in the opposite direction of the data flow. This ensures that the data sink is ready to receive data before the data source can start sending data. This simplifies the internal handshaking. This approach has multiple advantages. * Issuing a reset and removing all state takes less time than explicitly flushing one sample per clock cycle at a time. * It simplifies the logic in the faster clock domains at the expense of more complicated logic in the slower control clock domain. This allows for higher fMax on the data paths. * Less signals to synchronize from the control domain to the data domains The implementation of the pause mode has also slightly changed. Pause is now a simple disable of the data domains. When the transfer is resumed after a pause the data domains are re-enabled and continue at their previous state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>	2018-07-03 13:44:34 +02:00
Lars-Peter Clausen	95c98c634e	axi_dmac: Split transfer handling into separate sub-module Move the transfer logic, including the 2d module, into its own sub-module. This allows testing of the full transfer logic independently of the register map logic. The top-level module now only instantiates the register map and transfer module, but does not have any logic on its own. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>	2018-07-03 13:44:34 +02:00

Author

SHA1

Message

Date

Lars-Peter Clausen

8937c365a0

axi_dmac: Hook up rlast for MM-AXI source interface

For the memory-mapped AXI read interface the slave asserts rlast for the
last beat in a burst.

This means we don't have to count the number of beats to know when the
burst is completed but instead can use rlast. This slightly reduces the
amount of resources needed for the MM-AXI source module and given that the
beat_counter is often the bottleneck timing wise this should also improve
the timing.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

2018-07-03 13:44:34 +02:00

Lars-Peter Clausen

02bc91ad3a

axi_dmac: Rework transfer shutdown

The DMAC allows a transfer to be aborted. When a transfer is aborted the
DMAC shuts down as fast as possible while still completing any pending
transactions as required by the protocol specifications of the port. E.g.
for AXI-MM this means to complete all outstanding bursts.

Once the DMAC has entered an idle state a special synchronization signal is
send to all modules. This synchronization signal instructs them to flush
the pipeline and remove any stale data and metadata associated with the
aborted transfer. Once all data has been flushed the DMAC enters the
shutdown state and is ready for the next transfer.

In addition each module has a reset that resets the modules state and is
used at system startup to bring them into a consistent state.

Re-work the shutdown process to instead of flushing the pipeline re-use the
startup reset signal also for shutdown.

To manage the reset signal generation introduce the reset manager module.
It contains a state machine that will assert the reset signals in the
correct order and for the appropriate duration in case of a transfer
shutdown.

The reset signal is asserted in all domains until it has been asserted for
at least 4 clock cycles in the slowest domain. This ensures that the reset
signal is not de-asserted in the faster domains before the slower domains
have had a chance to process the reset signal.

In addition the reset signal is de-asserted in the opposite direction of
the data flow. This ensures that the data sink is ready to receive data
before the data source can start sending data. This simplifies the internal
handshaking.

This approach has multiple advantages.
 * Issuing a reset and removing all state takes less time than
   explicitly flushing one sample per clock cycle at a time.
 * It simplifies the logic in the faster clock domains at the expense of
   more complicated logic in the slower control clock domain. This allows
   for higher fMax on the data paths.
 * Less signals to synchronize from the control domain to the data domains

The implementation of the pause mode has also slightly changed. Pause is
now a simple disable of the data domains. When the transfer is resumed
after a pause the data domains are re-enabled and continue at their
previous state.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

2018-07-03 13:44:34 +02:00

Lars-Peter Clausen

95c98c634e

axi_dmac: Split transfer handling into separate sub-module

Move the transfer logic, including the 2d module, into its own sub-module.
This allows testing of the full transfer logic independently of the
register map logic.

The top-level module now only instantiates the register map and transfer
module, but does not have any logic on its own.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

2018-07-03 13:44:34 +02:00

3 Commits (ed5c5e55a075caeea79ee82257fcdffa15d9e1e9)