ed5c5e55a0
usrpe31x: Remove interrupt connections from system_top
2018-07-06 13:15:59 +03:00
03fa46f2fc
usrpe31x: Add the second channel
2018-07-06 13:15:59 +03:00
da54677101
usrpe31x: Initial commit
...
This project was moved from master into 'usrpe31x' feature branch.
To see the old commits, checkout the dev_prj_2018_r1 tag.
2018-07-06 13:15:59 +03:00
41e717ec2c
adrv9009: Added option for enabling the second observation channel
2018-06-29 11:10:39 +03:00
171093eca4
Move GTM projects to gtm_projects branch
2018-06-15 16:28:40 +03:00
6e7b19c944
Remove projects we don't support anymore
2018-06-15 16:17:48 +03:00
6bcbee9a42
motcon2_fmc: Add additional clock constraints and set delays for ethernet
2018-06-14 16:06:43 +03:00
5b222dba02
motcon2_fmc: Connect GPO pins to controller 1
2018-06-14 16:06:38 +03:00
e2df6b75c2
motcon2_fmc: Sync transfer start for the current monitor DMAs
...
There are a maximum of 3 channels enabled for the path, sync start is required
2018-06-14 16:06:24 +03:00
091bbfa2d3
motcon2_fmc: Ethernet MDIO set to EMIO
2018-06-14 16:06:17 +03:00
2975e9a360
motcon2_fmc: Update to revision C
2018-06-14 16:06:07 +03:00
dd912e1fb8
adi_tquest.tcl: Check recovery and and removal timing
...
In addition to setup and hold also check recovery and removal, they are
just as important.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-06-13 10:12:40 +02:00
e982232d75
adrv9009: Increased DMA clock frequency to ~333 MHz, by enabling AXI SLICES for DMAs
2018-06-12 23:53:56 +03:00
f3ac5d3ad3
adrv9009: Increase all DMAs MAX_BYTES_PER_BURST to 256
2018-06-12 23:53:56 +03:00
801351d93c
adrv9009: Increase sys_dma_clk to 325MHz. At 333 MHz, there are timing violations
2018-06-12 23:53:56 +03:00
cc18f76e3b
adrv9009: Reduced DAC FIFO size, as it's not useful for real applications and the memory can be used in other parts of the design
2018-06-12 23:53:56 +03:00
65c765eb33
adrv9009: Increase DMA FIFO sizes
2018-06-12 23:53:56 +03:00
ee60549dfc
daq3: ZCU102: Fix AXI_ADXCVR IPs XCVR_TYPE parameter
2018-06-08 13:56:22 +03:00
deb366d169
daq2|3: Set up OPTIMIZATION_MODE to improve timing
...
There are random timing violations on the A10GX board using the
DAQ3 and DAQ2 projects.
Setting the synthesis/implementation strategy to "HIGH PERFORMANCE
EFFORT" increases the success rate of the timing closure significantly.
2018-06-06 08:33:20 +01:00
bcba21da71
zcu102: updated IOSTANDARD of Bank 44 IOs to match VCCO 3.3V
2018-06-05 08:52:50 +01:00
5a257ce3c5
fmcomms5: Delete unused GPIO lines from system top
...
In the system top of the FMCOMMS5 projects, there are several GPIO lines, which
can not find in the constraint file, respectively gpio_open_15_15,
gpio_open_44_44 and gpio_45_45.
These are floating GPIO pins, as their names suggest. Delete all these wires and
update IOBUF instances.
2018-05-30 09:55:04 +03:00
1bd65da29f
fmcjesdadc1: increase DMAC FIFO size
...
The DMAC FIFO ocasionally overflow, increased it's size to give more time
the MM interface to move out the data.
2018-05-23 13:10:12 +01:00
4999a52f87
adrv9009: Removed ZC706 based project
2018-05-14 11:36:31 +03:00
e445fbe04f
adrv9009: Improved data throughput and DAC FIFO size
...
Moved XCVR related connections to HP0, where the HP shares the MUX with the Video DMA
HP1 and HP2 are used for RX OS and RX DMAs, sharing the MUX. Usually they shouldn't run at the same time.
HP3 is used for TX DMA, sharing the MUX with the FPD DMA controller
All HPx and DMA buswidths have been increased to 128 bits
The HPx-DMA clock has been increased to 300 MHz
DAC FIFO address size has been increased to 17
2018-05-14 11:33:04 +03:00
b9b619d918
axi_ad9144: Hide unused ports in DUAL mode
...
In DUAL mode half of the data ports are unused and the unused inputs need
to be connected to dummy signals.
Completely hide the unused ports in DUAL mode to remove that requirement.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-05-02 17:21:20 +02:00
e4d579726d
Renamed ad9379 to adrv9009
2018-04-26 18:19:11 +03:00
96c5cc9a66
adrv9379:zcu102: Update to new revision of the board
2018-04-26 18:19:11 +03:00
fe4278d2ea
adrv9379:zcu102: Move to FMC1
2018-04-26 18:19:11 +03:00
c24025c8d5
adrv9379:zcu102: Cleanup constraints
2018-04-26 18:19:11 +03:00
47ad04697d
adrv9379:zcu102: Fix constraints, from ZCU102 rev B to ZCU102 rev D
2018-04-26 18:19:11 +03:00
e4c4559b6d
adrv9379:ZCU102: Initial commit
2018-04-26 18:19:11 +03:00
bbb5a31994
Reviewed pinout of ZCU102 projects. fmcomms5 pin gpio_ad5355_lock location changed
2018-04-21 15:28:13 +03:00
3ce9f55c39
fmcjesdadc1:a10: Move block design into feature branch
...
Move block design file into the fmcjesdadc1_a10 feature branch.
2018-04-13 17:37:17 +01:00
c794cbb49d
daq3: Connect the DAC data underflow
...
Connect the DAC data underflow pin (fifo_rd_underflow) of the DMA
to the dunf pin of the device core. This way the software can detect
underflows in the DAC data path.
2018-04-13 18:46:29 +03:00
5075be8bff
daq2: Connect the DAC data underflow
...
Connect the DAC data underflow pin (fifo_rd_underflow) of the DMA
to the dunf pin of the device core. This way the software can detect
underflows in the DAC data path.
2018-04-13 18:46:29 +03:00
992011c3a3
fmcomms5: Connect the DAC data underflow
...
Connect the DAC data underflow pin (fifo_rd_underflow) of the DMA
to the dunf pin of the device core. This way the software can detect
underflows in the DAC data path.
2018-04-13 18:46:29 +03:00
6458e825e9
fmcomms7: Move project to a feature branch
2018-04-13 18:22:15 +03:00
05ce6dea26
usdrx1: Move project to a feature branch
2018-04-13 18:22:15 +03:00
ae1ec06ce6
fmcomms2:pr: Move project to a feature branch
2018-04-13 18:22:15 +03:00
43496cf80a
fmcomms11: Move project to a feature branch
2018-04-13 18:22:15 +03:00
6419de60c4
fmcjesdadc1:altera: Move projects to a feature branch
2018-04-13 18:22:15 +03:00
18bdf91254
daq1: Move project to a feature branch
2018-04-13 18:22:15 +03:00
1c959a8f85
usrpe31x: Delete deprecated project
2018-04-13 18:22:15 +03:00
9ea6652cba
adrv9364z7020:ccusb: Delete deprecated project
2018-04-13 18:22:15 +03:00
748b4598fc
adrv9361z7035:ccusb: Delete deprecated project
2018-04-13 18:22:15 +03:00
62c7ecbbff
adrv9361z7035:ccpci: Delete deprecated project
2018-04-13 18:22:15 +03:00
e940b375c8
adv7511:kcu105: Delete deprecated project
2018-04-13 18:22:15 +03:00
85913c1b00
adv7511:vc707: Delete deprecated project
2018-04-13 18:22:15 +03:00
a277d55c35
adv7511:kc705: Delete deprecated project
2018-04-13 18:22:15 +03:00
2f5a4a2428
de10: license: Fix a spelling mistake
...
Same as commit 425e8033
2018-04-12 10:54:12 +02:00
Adrian Costina
Istvan Csomortani
Lars-Peter Clausen
Laszlo Nagy